1. សេចក្តីផ្តើម
The Altronix NETWAY3012 is a 12VDC/30W NetWay midspan adapter designed to provide power and data over a single Ethernet cable to IP cameras and other compatible devices. This manual provides essential information for the proper installation, operation, and maintenance of your NETWAY3012 adapter.
This product is UL/cUL Listed (UL60950-1), ensuring compliance with safety standards for information technology equipment.
2. ផលិតផលលើសview
Figure 1: Altronix NETWAY3012 MidSpan Adapter. This image shows the compact black enclosure of the adapter with its label on top, displaying "Altronix Netway Netway3012 Adapter" and a CE mark. The front panel features two Ethernet ports (RJ45) and a terminal block for power connections, along with a small red switch or indicator.
The NETWAY3012 is a compact device that facilitates Power over Ethernet (PoE) functionality, allowing for simplified cabling in network installations. It acts as an intermediary device, injecting power into an Ethernet cable to power remote devices without the need for separate power outlets at the device location.
3. ការដំឡើងនិងការដំឡើង
Before installation, ensure all power sources are disconnected. Refer to local electrical codes and regulations for proper installation procedures.
- ការដំឡើង៖ Position the NETWAY3012 in a secure, dry location, away from direct sunlight and excessive heat. Ensure adequate ventilation.
- ការតភ្ជាប់ថាមពល៖ Connect a 12VDC power source to the designated power input terminals on the adapter. Observe correct polarity (+/-). The adapter requires a 12VDC input to deliver power to the connected PoE device.
- Data Input (LAN): Connect an Ethernet cable from your network switch or router to the "LAN IN" port on the NETWAY3012 adapter. This port receives data from your network.
- PoE Output (PoE OUT): Connect an Ethernet cable from the "PoE OUT" port on the NETWAY3012 adapter to your PoE-compatible device (e.g., IP camera, VoIP phone, wireless access point). This cable will carry both data and power to the device.
- បើកថាមពល៖ Once all connections are secure, connect the 12VDC power source to the adapter. Observe any indicator lights for proper operation.
ចំណាំ៖ Ensure the connected device is compatible with the 12VDC/30W power output provided by the NETWAY3012 to prevent damage.
4. សេចក្តីណែនាំប្រតិបត្តិការ
The Altronix NETWAY3012 operates automatically once properly connected and powered. It functions as a midspan Power over Ethernet injector.
- ការផ្គត់ផ្គង់ថាមពល៖ The adapter injects 12VDC power into the Ethernet cable connected to the "PoE OUT" port, allowing the connected PoE device to receive power directly through the network cable.
- Data Passthrough: Network data from the "LAN IN" port is passed through to the "PoE OUT" port without modification, ensuring seamless network communication.
- សូចនាករស្ថានភាព៖ (If applicable, refer to device for specific LED indicators) Typically, a power LED indicates the unit is receiving input power, and link/activity LEDs on the Ethernet ports indicate data connection and traffic.
No user configuration is typically required for the basic operation of this midspan adapter.
5. ការថែទាំ
The NETWAY3012 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:
- ការសម្អាត៖ Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid or aerosol cleaners.
- ខ្យល់ចេញចូល៖ Ensure that the adapter's ventilation openings (if any) are not blocked to prevent overheating.
- លក្ខខណ្ឌបរិស្ថាន៖ Operate the device within its specified temperature and humidity ranges. Avoid extreme temperatures and high moisture environments.
- ភាពសុចរិតនៃខ្សែ៖ Periodically inspect all connected cables for damage or wear. Replace damaged cables immediately.
6. ការដោះស្រាយបញ្ហា
If you encounter issues with your NETWAY3012 adapter, refer to the following common troubleshooting steps:
| បញ្ហា | មូលហេតុដែលអាចកើតមាន | ដំណោះស្រាយ |
|---|---|---|
| មិនមានថាមពលទៅឧបករណ៍ដែលបានភ្ជាប់ទេ។ |
|
|
| គ្មានការតភ្ជាប់ទិន្នន័យ។ |
|
|
| Device intermittently loses power/connection. |
|
|
If the problem persists after attempting these solutions, contact Altronix technical support.
7. លក្ខណៈបច្ចេកទេស
| លក្ខណៈ | លម្អិត |
|---|---|
| គំរូ | NETWAY3012 |
| ម៉ាក | អាល់ត្រូនិច |
| ទិន្នផលថាមពល | 12VDC / 30W |
| ប្រភពថាមពល | Corded Electric (requires external 12VDC input) |
| វិមាត្រ (LxWxH) | 2.52 x 3.82 x 0.98 អ៊ីញ |
| ទំងន់ធាតុ | 3.3 ផោន |
| វិញ្ញាបនប័ត្រ | UL/cUL Listed (UL60950-1) |
| កាលបរិច្ឆេទដំបូងដែលមាន | ថ្ងៃទី ២១ ខែសីហា ឆ្នាំ ២០២២ |
8. ព័ត៌មានធានា
Altronix products are typically covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Altronix webគេហទំព័រ។ រក្សាភស្តុតាងនៃការទិញរបស់អ្នកសម្រាប់ការទាមទារធានា។
9. ជំនួយបច្ចេកទេស
For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact Altronix technical support directly. Contact information can usually be found on the Altronix official webគេហទំព័រ ឬនៅលើវេចខ្ចប់ផលិតផល។
អាល់ត្រូនិច Webគេហទំព័រ៖ www.altronix.com
