Aperia TECHNOLOGIES Handheld Tread Reader User Guide

HALO CONNECT TECH APP: USING THE TREAD READER

មាតិកា លាក់

1 ឧបករណ៍ដែលត្រូវការ៖

2 ឯកសារ/ធនធាន

2.1 ឯកសារយោង

ឧបករណ៍ដែលត្រូវការ៖

An installed/activated Halo Connect Gateway
An NFC-enabled mobile device with iOS 16.6 or Android 8.0 or later

TREADREADER™ Handheld 3D Scanner

មុនពេលអ្នកចាប់ផ្តើម៖

Inspect Tires and Valve Stems for damage
From Google Play or the Apple App Store, install the “Halo Connect Halo Tech” app on your device or scan the QR code below
From Google Play or the Apple App Store, install the “Aperia Halo Tread” app on your device

HALO TECH APP

Scan the QR code to Install the Halo Connect Tech App
https://aperiatech.com/halo-connect-application/

TREADREADER™ & Halo Tread App

Get Aperia Halo Tread App on Google Play / App Store
SCANNING TREAD DEPTH WITHIN THE HALO CONNECT TECH APP:
The following workflow illustrates the process within the Halo Connect Tech app for establishing a Bluetooth connection with your TREADREADER™ and performing periodic tread depth scanning operations on your vehicle.

OPEN THE TECH APP AND PROCEED TO THE MAIN MENU – SELECT “RECORD TREAD DEPTH”
SCAN THE HALO CONNECT GATEWAY LABEL QR CODE MOUNTED ON THE TRACTOR DOOR OR TRAILER PANEL

THE APP WILL LIST ALL PREVIOUS SCANS OR MANUAL ENTRIES – SELECT “ADD NEW”
THE APP WILL ASK FOR THECURRENT ODOMETER READING – ENTER IT AND SELECT “NEXT”

TREAD DEPTH CAN BE ADDED MANUALLY OR SCANNED – SELECT “TREAD READER SCANNER” AND “PROCEED”
ON THE DIAGRAM, SELECT THE WHEEL (OR ALL) THAT YOU WOULD LIKE TO SCAN – SELECT “PROCEED TO PAIRING”

A NEW READER CAN BE ADDED BY ENTERING THE SERIAL # FROM THE LABEL OR SCANNING THE QR CODE
ON THE READER, CONFIRM THAT THE POWER LIGHT IS ON AND THAT THE DEVICE IS CHARGEDHOLDING DOWN THE BATTERY BUTTON FOR 1 SECOND WILL INDICATE THE BATTERY LEVEL

THE READER’S LEDS WILL ALSO PROVIDE THE FOLLOWING STATUSESBEFORE CONTINUING, VERIFY THAT THE THIRD BLUE LIGHT IS LIT AND THE READER IS READY TO PAIR
ENTER THE SERIAL NUMBER OF THE READER (FOUND ON THE LABEL) OR CLICK “SCAN CODE WITH CAMERA”SERIAL NUMBERS WILL BEGIN WITH 801 FOR BLUETOOTH DEVICES OR WITH 601 / 701 FOR WI-FI

TO SCAN THE QR CODE, FIND THE LABEL LOCATED AT THE REAR OF THE READER
DEPENDING UPON YOUR DEVICE TYPE, YOU WILL BE PROMPTED TO PROVIDE PERMISSIONS FOR THE PAIRING PROCESS – CLICK “PAIR” OR “JOIN”

WHEN THE PROCESS IS COMPLETE, THE SECOND BLUE LED ON THE READER WILL LIGHT AND THE APP WILL PROCEED
THE SCREEN WILL DISPLAY A DIAGRAM OF THE VEHICLE AND THE FIRST WHEEL SELECTED FOR SCANNING

PLACE THE SCANNER ON THE EDGE OF THE TIRE AT THE 5 OR 7 O’CLOCK POSITION AND SLIDE SMOOTHLY ACROSS THE TREAD FACEWHEN FINISHED SCANNING, THE SCANNER WILL VIBRATE WITH ONE SHORT BUZZ (2 SEC)
IF THE SCANNER VIBRATES WITH ONE LONG BUZZ, THE SCAN IS INVALID AND WILL NEED TO BE REPEATED
WHEN COMPLETE, THE SCAN WILL APPEAR FOR REVIEW – CLICKING “RESCAN” WILL RESTART THE PROCESS

WHEN FINISHED, REVIEW ALL SCANS AND CLICK “SAVE” TO CONTINUE OR “RESCAN” TO REVISE AN ENTRY
THE SESSION WILL NOW APPEAR IN YOUR TREAD DEPTH RECORD BY MILELAGE AND DATE AND CAN BE