Klipsch R-51PM-1 Powered Monitor Speakers
introduction 
in the box
RIGHT SPEAKER (ACTIVE)
ENCEINTE DROITE (ACTIVE)
- LED Source Indicator
- Phono/Line Switch
- Volume/Source Control
- Phono Inputs
- Auxiliary 3.5mm Input
- Subwoofer Output
- Optical Input
- USB Audio Input
- Left Speaker Terminal
- Ground Screw Terminal
- Mains Inlet
SETUP
CONNECTIONS – TV
CONNECTIONS – COMPUTER
CONNECTIONS – TURNTABLE
- Your TV will need to be set to PCM (or Stereo Only)
REMOTE
IR REMOTE CONTROL CODES
- ON / OFF
0x 02FD 0AF5 - Mute
0x 02FD 0DF2 - Subwoofer Level Up
0x 02FD 0CF3 - Subwoofer Level Down
0x 02FD 04FB - Volume Up
0x 02FD 1CE3 - Volume Down
0x 02FD 07F8 - Subwoofer
0x 02FD 03FC - LED ON / OFF
0x 02FD 08F7 - Play/Pause
0x 02FD 1EE1 - Phono Source Select
0x 02FD 01FE - Auxiliary Source Select
0x 02FD 09F6 - Digital Optical Source Select
0x 02FD 00FF - USB Source Select
0x 02FD 48B7 - Bluetooth® Source Select
0x 02FD 5CA3
features
- ON / OFF
- Mute
- Subwoofer Level Up
- Subwoofer Level Down
- Volume Up
- Volume Down
- Subwoofer Level Reset
- LED ON/OFF
- Play/Pause
- Phono Source Select
- Auxiliary Source Select
- Digital Optical Source Select
- USB Source Select
- Bluetooth® Source Select
BLUETOOTH ® WIRELESS TECHNOLOGY
- Hold 3 Seconds
- Flashing Blue
- Blue / Flashing
- Solid Blue
RECONNECT
SUBWOOFER OUTPUT
LED SOURCE INDICATOR
- BLUE = Bluetooth® Inpu
- RED = Optical Inputt
- PURPLE = Phono Input
- WHITE = USB Audio Input
- GREEN = Auxiliary Input
SELECT SOURCE
CARE AND CLEAN
DYNAMIC BASS EQ
- Dynamic Bass EQ applies loudness correction to automatically adjust low frequency levels as volume changes.
- For best results, increase input source volume to maximum.
Documents / Resources
 |
Klipsch R-51PM-1 Powered Monitor Speakers [pdf] Instruction Manual R51PM-1, R51PM1, STI-R51PM-1, STIR51PM1, R-51PM-1, R-15PM-1, R-50PM, Powered Monitor Speakers, R-51PM-1 Powered Monitor Speakers |
