Klipsch RW-5802 II IW SUB In-Wall Speaker
IMPORTANT SAFETY INSTRUCTIONS
- READ these instructions.
- KEEP these instructions.
- HEED all warnings.
- FOLLOW all instructions.
- DO NOT use this apparatus near water.
- CLEAN ONLY with a dry cloth.
- DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- DO NOT defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- ONLY USE attachments/accessories specified by the manufacturer.
- USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- UNPLUG this apparatus during lightning storms or when unused for long periods of time.
- REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Warning: This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
Danger: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
WARNING: Voltages in this equipment are hazardous to life.
No user-serviceable parts inside. Refer all servicing to qualified service personnel.
CAUTION: Changes or modifications not expressly approved by the manufacturer could void the users authority to operate this device.
ABOUT YOUR KLIPSCH PURCHASE
Your new Klipsch architectural subwoofer has been designed to deliver great sound while remaining unobtrusive wherever you install it.
The RW-5802 can be used whenever a free-standing subwoofer cannot be installed. The RW-5802 has been designed to be used only with the RSA-500 amplifier. The RSA-500 can be used with one or two RW-5802 modules to maximize your results.
Minimum Tools Required for Installation
- #2 Phillips Screwdriver
- Wire strippers
- Level
- Stud finder
- Saw
In-Wall Speaker Placement
Designed to function in any standard wall the RW-5802 in-wall subwoofer is engineered for years of performance. Minimum construction requirements call for drywall or other mounting surfaces to be at least 1/2″ thick.
To maximize performance, install the RW-5802 low and near a corner if possible. Try to avoid placing in locations where the adjacent area would be disturbed by any sound that could transfer through to the other side of the wall.
Speaker Installation (for New Construction, skip to step #3)
- Cut the appropriate size opening in the wall or ceiling using the template provided. If the template is not available, cutout dimensions are provided on the Klipsch website, at www.klipsch.com. Sizes listed are minimum. If accuracy of cut cannot be achieved, you may add 1/4″ to each dimension. Be careful not to cut through any existing wiring or plumbing. Avoid compromising any fire stops between studs.
- Run speaker wiring (18 gauge minimum) to the openings. Be sure to comply with all building codes in your area.
- Attach the wire to the speaker using the wire’s color coding or markings as a guide to maintain proper polarity.
- Insert the speaker assembly into the opening and attach by tightening the six Phillips screws (see illustration). The frame’s six “dogs” will swivel out and “sandwich” the wall and frame together as they are tightened. If you use a power tool to tighten these screws, please use a low torque setting. Failure to do so could result in damage to your speaker.
- At this point, you may paint the speaker grille before attaching it to the speaker. Klipsch speakers and grilles are designed to accept most types of paint. Use the supplied clear paint shield to protect the speaker baffle and drivers when painting the bezel of the speaker. Care should be taken to avoid excessive paint build-up in the grille perforations. Please remove the scrim material attached to inner surface of the grille by carefully peeling it out prior to painting. Reinstall scrim after the paint on the grille is dry.
- Press the grille into place.
WARRANTY—U.S. AND CANADA ONLY
The Warranty below is valid only for sales to consumers in the United States or Canada.
KLIPSCH, L.L.C. (“KLIPSCH”) warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of five (5) years from the date of purchase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this product or any defective parts (excluding electronics and amplifiers). For products that have electronics or amplifiers, the Warranty on those parts is for a period of two (2) years from the date of purchase.
To obtain a Warranty service, please contact the KLIPSCH authorized dealer from which you purchased this product. If your dealer is not equipped to perform the repair of your KLIPSCH product, it can be returned, freight paid, to KLIPSCH for repair. Please call KLIPSCH at 1-800-KLIPSCH for instructions. You will need to ship this product in either its original packaging or packaging affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the Warranty period, must be presented or included to obtain Warranty service.
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not purchased from a KLIPSCH authorized dealer. You may call 1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a KLIPSCH authorized dealer.
This Warranty is only valid for the original purchaser and will automatically terminate prior to expiration (if applicable) if this product is sold or otherwise transferred to another party.
This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence, acts of God, accident, commercial use or modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than KLIPSCH or a KLIPSCH dealer who is authorized to do KLIPSCH warranty work. Any unauthorized repairs will void this Warranty. This Warranty does not cover products sold AS IS or WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
Some states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights, which vary from state to state.
WARRANTY OUTSIDE THE UNITED STATES AND CANADA
The Warranty on this product if it is sold to a consumer outside of the United States or Canada shall comply with applicable law and shall be the sole responsibility of the distributor that supplied this product. To obtain any applicable warranty service, please contact the dealer from which you purchased this product or the distributor that supplied this product.
FAQs
Is there a need for a second enclosure for this Klipsch RW-5802 subwoofer?
It would be best if this item were enclosed in some kind of waterproof or baffling material. In addition to greater bass response, your investment would have a better chance of surviving a leak as a result.
Is a unique amp necessary for the RW-5802 to power the subwoofer?
For usage with the Klipsch RW-5802 II, we only advise utilising the RSA-500 amplifier.
Is the isa-500 amplifier necessary to power these or can a good 100w/8ohm receiver power them instead?
For amplifier power, the RSA-500 should be linked to the R-5802 II.
The in-wall 10″ sub has deep bass, but do the dual 8″ subs?
The dual 8″ RW-5802-II is a fantastic option to mix in with other non-subwoofer in-wall speakers in a surround theatre and smaller space setups because the 10″ will extend into lower frequencies.
What should Klipsch RW-5802 subwoofer crossover be set at?
The crossover is the frequency range where the other speakers in your system will give way to the subwoofer. Although setting the crossover (Low Pass knob) at 80Hz is typically advised, there is some room for individual variation.
How do I connect my Klipsch RW-5802 subwoofer to my TV?
Run an RCA wire from the AV receiver’s subwoofer output to the subwoofer’s line input to use as a Subwoofer cable to connect the subwoofer to the receiver. The LFE channel, the white RCA connector, or a stereo pair of white and red RCA connections can all be used to connect Klipsch subwoofers.
Where should a Klipsch RW-5802 in-wall subwoofer be placed?
If you only have a single subwoofer, we advise mounting it on the front wall, ideally towards one of the front corners. The subwoofer will better couple to the space if it is placed in a corner, increasing bass impact.
How far should my Klipsch RW-5802 sub be from the wall?
In fact, when pulled at least 8 to 12 inches from any wall, high-quality subs usually sound their finest. In order to reduce temporal delays and phase cancellation, subwoofers also perform better when situated in the front part of your listening area, nearer to your front-channel loudspeakers.
Can a Klipsch RW-5802 subwoofer face the wall?
Give your subwoofer 3–4 inches to travel through the wall, and you’ll be OK. Although firing into a wall could be the best, how the sub is faced does have a small impact on the frequency response.
Does it matter which way a Klipsch RW-5802 subwoofer faces?
Since subwoofer placement is so variable, there isn’t a right or incorrect area; instead, you should opt for a location that fills the space with bass without allowing you to pinpoint the bass source. Measure the distance. Ideally, the distance between the subwoofer and the wall is equal to the subwoofer’s size.
How many Klipsch RW-5802 subwoofers do I need?
The headroom is always increased by two subs because they have a wider frequency range and less distortion. Additionally, they lessen output compression, which enhances the user experience in general. Therefore, when the levels are high, having two subs provides you a more precise and clean output.
Is it OK to put speaker on top of Klipsch RW-5802 subwoofer?
You can, however it’s not recommended because the other speaker would be subjected to low frequency vibrations coming from the subwoofer. Although it would undoubtedly save room, it’s not a good idea.
How big of a Klipsch RW-5802 sub do I need?
An 8″ or 10″ subwoofer will work well with compact satellite or bookshelf speakers in your system. A 12″ sub, on the other hand, is a better sonic complement if you have large floor-standing speakers and a large centre channel.
Can I put an amp on top of a Klipsch RW-5802 subwoofer?
You ought to be okay. As long as one of your subs can physically fit the amp in place and is big enough. Any significant or even minute vibration impacts on the circuitry of either item should be minimised by the weight damping on the Sub from the amplifier..
What happens if my Klipsch RW-5802 subwoofer box is too small?
The mechanical limits of the woofer will be simpler to attain as the enclosure size grows. If the box is (reasonably) too small, increase power. The driver will be able to still pound out that bass despite the low volume!
