KKSB 7350001162096 Display Stand for Raspberry Pi Touch Display
Specifications
- Product Name: KKSB Display Stand for Raspberry Pi Touch Display 2 with Case for Raspberry Pi 5
- EAN: 7350001162096
- Standards: RoHS Directive Compliant
Read before use
This document contains important technical and safety information about the device, its safety use, and installation
WARNING: CHOKING HAZARD- SMALL PARTS. NOT FOR CHILDREN UNDER 3 YEARS
Product Introduction
This case for the Raspberry Pi 5 display is precisely engineered to fit the Raspberry Pi 5 and the official Raspberry Pi Touch Display 2, ensuring a snug and secure fit. A convenient external start button is integrated into the case, allowing you to power your Raspberry Pi 5 effortlessly without accessing internal components. A dedicated 40-pin GPIO cable cutout on the side allows easy connection to external devices. The case also includes pre-cut openings for standard interfaces, ensuring hassle-free connectivity.
Note: Electronics, Raspberry Pi 5, HATs, and Coolers/Heatsinks are NOT included.
Detailed Product Information
How to Assemble The KKSB Cases
Standards for Inclusion: RoHS Directive
This product meets the requirements of the RoHS Directive (2011/65/EU and 2015/863/EU) and the UK RoHS Regulations (S.I. 2012:3032).
Disposal and Recycling
To protect the environment and human health, and to conserve natural resources, it is important that you dispose of the KKSB Cases responsibly. This product contains electromechanical components that can be harmful if not disposed of properly.
- Do not dispose of the KKSB Cases as unsorted municipal waste.
- Take the module to a designated electronic waste (e-waste) recycling facility.
- Do not incinerate or dispose of the module in regular household waste. By adhering to these disposal and recycling guidelines, you can help ensure that the KKSB Cases is disposed of in an environmentally responsible manner.
WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Manufacturer: KKSB Cases AB
- Brand: KKSB Cases
- Address: Hjulmakarevagen 9, 443 41 Grabo, Sweden
- Tel: +46 76 004 69 04
- E-mail: support@kksb.se
- Official website: https://kksb-cases.com/
Changes in the contact information data are published by the manufacturer on the official website.
FAQs
Q: What should I do if I encounter issues during assembly?
A: If you face any difficulties during assembly, refer to the provided assembly instructions carefully. You can also reach out to customer support for assistance.
Q: How can I verify if my disposal method is environmentally responsible?
A: To ensure responsible disposal, always opt for designated electronic waste recycling facilities. Do not dispose of the product in regular household waste or incinerate it.
Documents / Resources
 |
KKSB 7350001162096 Display Stand for Raspberry Pi Touch Display [pdf] User Manual 7350001162096 Display Stand for Raspberry Pi Touch Display, 7350001162096, Display Stand for Raspberry Pi Touch Display, Raspberry Pi Touch Display, Pi Touch Display |