KiwiCo LAB2RCB-F2664 RC Delivery Bot
Specifications
- Model: Delivery Bot
- Manufacturer: kiwico
- Parts: Body, Controller, Battery Pack, Wires
Building the Body (Part A)
- Turn the battery pack OFF before continuing.
- Tuck wires to the side ensuring the switch fits between the ribs.
- Make sure the wires and switch tuck down on the sides of the yellow ribs.
- Push together the body parts, ensuring the red connectors are held securely.
- Repeat Step 4 and fit all parts together.
Wiring it Up (Part B)
- Add clips to the body as instructed.
- Hold the bot by the body and attach clips one at a time.
- Follow the wiring instructions carefully, ensuring to hold the red connectors and avoiding direct pulling on wires.
- Tuck in the wires securely, bending them if needed to fit properly.
Making the Controller (Part D)
- Follow the steps to assemble the controller components.
- Ensure all connections are secure and wires are clear.
Frequently Asked Questions (FAQ)
Q: My bot is not responding, what should I do?
A: Firstly, ensure the battery pack is turned ON. If there is no response, check the wiring connections, and make sure all components are assembled correctly.
Q: How do I customize my Delivery Bot?
A: To customize your bot, grab the crate cover provided and explore different ways to personalize your bot. Feel free to experiment with various modifications or create your own designs!
Documents / Resources
 |
KiwiCo LAB2RCB-F2664 RC Delivery Bot [pdf] Installation Guide 2A2FL-LAB2RCB, 2A2FLLAB2RCB, LAB2RCB-F2664 RC Delivery Bot, LAB2RCB-F2664, RC Delivery Bot, Delivery Bot, Bot |