KIRSTEIN 00096490 S Concat Basic Control Owner’s Manual
KIRSTEIN 00096490 S Concat Basic
BASS
Use the bass control for low frequency adjustment, turn left for decreasing low frequencies and turn right for increasing low frequencies.
TREBLE
Use the treble control for high frequency adjustment, turn left for decreasing high frequencies and turn right for increasing high frequencies.
VOLUME
With the volume control it’s possible to adjust the input sensitivity, turn left for decreasing the input sensitivity and turn right for increasing the input sensitivity.
POWER SWITCH
Turns the loudspeaker on/off. Make sure the volume knob is set to minimum before turning it on!
POWER INPUT
Connect the included power adapter to this input and connect the other end of the cable to a power source.
OUTPUT
RCA connector for slave speaker (right).
INPUT
RCA input left and right.
Bluetooth:
To pair with Bluetooth, first press the Bluetooth button until the Bluetooth blinks, then turn on the Bluetooth Settings on your mobile device, search the list of “MTO3B” devices, select it, and complete the pairing process.Once the pairing is complete, the Bluetooth button will be fixed in blue and you can enjoy the transmission from your mobile device.If you press the bluetooth button again, it will turn off.
Read More About This Manual & Download PDF:
Documents / Resources
 |
KIRSTEIN 00096490 S Concat Basic Control [pdf] Owner's Manual 00096490 S Concat Basic Control, 00096490, S Concat Basic Control, Concat Basic Control, Basic Control, Control |