Kinetic KTX9312 3 Phase BLDC Motor Controller User Guide
3-phase BLDC Motor Controller for 3-wire with Built-in Gate Drivers
EVAL Kit Physical Contents
| Item # | Description | Quantity |
| 1 | KTX9312 EVAL Kit fully assembled PCB | 1 |
| 2 | Arduino Nano | 1 |
| 3 | USB 2.0 Type A to Mini B cable | 1 |
| 4 | 2 Position Terminal Block Plug, Female Sockets (5.08mm) 180° Free Hanging | 1 |
| 5 | 3 Position Terminal Block Plug, Female Sockets (5.08mm) 180° Free Hanging | 1 |
| 6 | Anti-static bag | 1 |
| 7 | KTX9312 EVAL Kit Quick Start Guide — printed 1-page (A4 or US Letter) | 1 |
| 8 | EVAL Kit box | 1 |
QR Links for Documents
| IC Landing Page | EVAL Kit Landing Page |
|
|
|
User-Supplied Equipment
- Oscilloscope (20~50A current probe), used to measure phase current, driving PWM signals and FG
- Tachometer, used to measure the spinning speed of
- Motor with relative
- DC power supply (40V/30A).
Quick Start Procedures
- Connect the power supply to the KTX9312 evaluation board connector
- Connect the motor wires to
- Connect the KTX9312 evaluation board to a computer via the USB type-C cable and Arduino Nano which is mounted at the back of the evaluation
- Install GUI
- Turn on the power supply to power-up the LED1 is lighted on, indicating that the board is powered up.
- Launch the GUI software, connect it to the evaluation
- Load parameters configured excel file or configure the registers for matching the motor/application
- Select “Run” or “Stop” to run/stop the
Graphical User Interface (GUI)
- Download and install GUI software located on EVAL Kit
- After installing software, select the available serial port of computer and connect it with KTX9312 evaluation The message of “connected to COM x” will appear in the status box.
- If a communication failure occurs, please check to ensure that both the power supply and serial port connection are.
Read More About This Manual & Download PDF:
Documents / Resources
 |
Kinetic KTX9312 3 Phase BLDC Motor Controller [pdf] User Guide KTX9312 3 Phase BLDC Motor Controller, KTX9312, 3 Phase BLDC Motor Controller, BLDC Motor Controller, Motor Controller, Controller |