Kinan KFH201S_TX USB HDMI Dual View KVM Extender User Manual
Product Description
The KFH201S USB Dual HDMI over fiber KVM extender integrates the latest HD Base T™ technology and delivers dual HD HDMI video, USB and stereo audio signals up to 300m by using fiber optics; if the cable type is single mode, the transmitting distance is up to 10km.
A complete set of KFH201S including Transmitter (KFH201S_TX) and Receiver (KFH201S_RX). The Transmitter is connected to a computer or server, and the receiver is connected to a display, keyboard, audio player and other USB devices.
The KFH201S enables remote high‐speed access to a computer at HD display resolution, while improving workplace ergonomics and separating employees from a noisy working environment.
*Note: The bandwidth of the optical module must reach 10Gbit/sec.
Features
- Uses one fiber optic cable to connect the transmitter and receiver units
- Allows HDMI dual view access to your computer from a remote console up to 300m by using multimode type cable, if the cable type is single mode, transmitting distance is up to 10km.
- Superior HDMI video quality of up to 1920×1080@60Hz.
- Transparent USB 2.0 – Supports a wide range of USB devices including keyboards, mice, mass storage devices and printers. It provides 4 USB ports on the Receiver and 1 USB on the Transmitter.
- Support individual 2‐channel stereo audio, 1 LINEIN + 1 LINEOUT.
- RS232 serial port – support connection to a serial terminal.
- Support local HDMI output
- Easy to install ‐ no software required ‐ connecting cables to the devices is all it takes
- Plug and play
KFH201S_RX (Front View)
| No. | Components | Description |
| 1 | RXLOS | SFP+ module signal receiving |
| 2 | TXLFT | The LED indicator that shows the SFP+ module has been connected, when the light is on, the SFP+ module is recognized. |
| 3 | LINKRX | Flashing: data is being transferred Off: The connection is unsuccessful |
| 4 | LINKTX | Flashing: data is being transferred Off: The connection is unsuccessful |
| 5 | HDCP1 | HDMI‐1 device video status |
| 6 | FW1 | HDMI‐1 device running indicator |
| 7 | HDCP2 | HDMI‐2 device video status |
| 8 | FW2 | HDMI‐2 device running indicator |
| 9 | FWR | Power indicator, indicate power status |
KFH201S_RX (Rear View)
| No. | Components | Description |
| 1 | 9‐12V | 9‐12V power connection port |
| 2 | RS232 | Serial port |
| 3 | AOUT | Audio output |
| 4 | AIN | MIC input |
| 5 | HDMI OUT1 | Connect to HDMI monitor 1 |
| 6 | HDMI OUT2 | Connect to HDMI monitor 2 |
| 7 | USB | Connect to USB peripherals or key board and mouse |
| 8 | SFP+ | Connect to TX with fiber cable |
KFH201S_TX (Front View)
| No. | Components | Description |
| 1 | RXLOS | SFP+ module signal receiving |
| 2 | TXLFT | The LED indicator that shows the SFP+ module has been connected, when the light is on, the SFP+ module is recognized. |
| 3 | LINK‐RX | Flashing: data is being transferred Off: The connection is unsuccessful |
| 4 | LINK‐TX | Flashing: data is being transferred Off: The connection is unsuccessful |
| 5 | HDCP1 | HDMI‐1 device video status |
| 6 | FW1 | HDMI‐1 device running indicator |
| 7 | HDCP2 | HDMI‐2 device video status |
| 8 | FW2 | HDMI‐2 device running indicator |
| 9 | FWR | Power indicator, indicate power status |
KFH201S_TX (Rear View)
| No. | Components | Description |
| 1 | 9‐12V | 9‐12V power connection port |
| 2 | HDMI OUT1 | Connect to HDMI out display 1 |
| 3 | HDMI OUT2 | Connect to HDMI out display 2 |
| 4 | HDMI IN1 | HDMI video input 1 |
| 5 | HDMI IN2 | HDMI video input 2 |
| 6 | RS232 | Serial port |
| 7 | AOUT | Audio output |
| 8 | AIN | MIC input |
| 9 | USB | Connect to the USB port of the computer |
| 10 | SFP+ | Connect to RX with fiber cable |
Connection Diagram
Specifications
| Function | KFH201S_TX | KFH201S_RX | |
| Connector | HDMI Input | 2 | NA |
| HDMI Output | 2 | 2 | |
| Power | 12V | 12V | |
| Fiber Module | SFP+ x 1 | SFP+ x 1 | |
| Microphone | 3.5MM Stereo Jack(Pink) | 3.5MM Stereo Jack(Pink) | |
| Speaker | 3.5MM Stereo Jack(Green) | 3.5MM Stereo Jack(Green) | |
| USB Type B | 1 | N/A | |
| USB 2.0 | N/A | USB x 4 | |
| Resolution | Single‐channel: 4K@60Hz (YCbCr 4:2:0)Dual‐channel : 1920×1080@60Hz | ||
| Connection Cable | Fiber cable | ||
| Power Input | 9‐12VDC | 9‐12VDC | |
| Power Consumption | 12W | ||
| Operating Temperature | 0—50 ℃ | ||
| Storage Temperature | ‐20—60 ℃ | ||
| Humidity | 0—80% RH, Non‐condensing | ||
| Material | Metal | ||
| Net Weight (kg) | 0.63kg | 0.63kg | |
| Product Dimension(W × D × H) | 218 mm x 115 mm x 40mm | ||
www.kinankvm.com
@All right reserved Shenzhen Kinan Technology Co., Ltd.
Date: 2024/05
Version: V2.0
Documents / Resources
 |
Kinan KFH201S_TX USB HDMI Dual View KVM Extender [pdf] User Manual KFH201S_TX, KFH201S_RX, KFH201S_TX USB HDMI Dual View KVM Extender, KFH201S_TX, USB HDMI Dual View KVM Extender, Dual View KVM Extender, View KVM Extender, KVM Extender, Extender |
