KFH188S IP KVM Matrix Extender
“
Specifications
- Product Name: IP KVM Matrix Extender (KFH188S)
- Transmission Distance: 150m for point-to-point connection with
Ethernet cable - Resolution: Up to 3840×2160@30Hz
- Network Compatibility: Gigabit network switch
- Matrix Switching System: Supports up to 40 nodes independently,
up to 9999 nodes with centralized management platform - Screen Switching: Fast non-black screen switching
- Signal Sources: Servers, workstations, cameras, video TV walls,
etc. - Video Compression Algorithm: High image quality and low latency
(8ms/1080P@60Hz) - Transmission Medium: CAT5e/6/7 network cables or optical
Product Usage Instructions
1. Installation and Setup
- Ensure the voltage setting is correct before use.
- Connect the KVM extender to the designated devices using
Ethernet cables or optical cables. - If forming a matrix switching system, connect to a Gigabit
network switch.
2. Operating the KVM Matrix Extender
- To switch between different signal sources, use the provided
interface on the device. - For centralized management platform usage, follow the
platform’s instructions for node setup and control. - Ensure all connected devices are powered on and configured
correctly for seamless operation.
3. Maintenance and Troubleshooting
- Regularly check for firmware updates on the manufacturer’s
website to ensure optimal performance. - If facing issues with connectivity or performance, refer to the
troubleshooting section in the user manual.
Frequently Asked Questions (FAQ)
Q: Can the KVM Matrix Extender support multiple users
simultaneously?
A: Yes, the extender can support multiple users accessing
different signal sources concurrently within its networked
environment.
Q: What is the recommended distance for optimal performance
when using optical cables?
A: For best results, it is recommended to keep the distance
within 150 meters when using optical cables for signal
transmission.
Q: How can I ensure secure access to the KVM Matrix
Extender?
A: Implement strong user authentication protocols and ensure
that only authorized personnel have access to the device through
proper user login credentials.
“`
IP KVM Matrix Extender ( KFH188S )
User Manual
www.kinankvm.com @ All rights reserved by Shenzhen Kinan Technology Co., Ltd.
Date: 2024 /10 Version: V1.0
IP KVM Matrix Extender (KFH188S)
User Manual
Call us for support
Telephone: +86 (755) 2665 4426 Office Time: 8:30am ~12:00am, 1:30pm~6:00pm (Monday to Friday) , GMT+8 Standard Time
User Notice
This manual contains important safety instructions as well as instructions for setting up the product and operating it. If the equipment is damaged due to inappropriate operation, the buyer (instead of the manufacturer, its distributor or dealer) will assume the entire cost of all necessary repairs. Please do read “Safety Instructions” carefully ( see chapter 1.3, page 5) before you switch on the product.
The manufacturer reserves the right to change specifications, functions or circuitry of the series described here without notice. Information in this manual can be changed, expanded, or deleted without notice. You can find the current version of the manual in the download area of our website.
Make sure that the voltage setting is correct before use.
1
IP KVM Matrix Extender (KFH188S)
Table of Contents
User Manual
User Notice ……………………………………………………………………….. 1 Table of Contents …………………………………………………………………2 1. Introduction ………………………………………………………………….. 3
1.1 Function……………………………………………………………………. 3 1.2 Product Features……………………………………………………….. 4 1.3 Safety Instructions …………………………………………………….. 4 1.4 Product Overview………………………………………………………. 6 1.4.1 KFH188S Transmitter (TX) ……………………………………… 6 1.4.2 KFH188S Receiver (RX)………………………………………….. 7 2. Installation …………………………………………………………………….. 8 2.1 Install the Extenders ………………………………………………….. 8 3. Extender Configuration …………………………………………………. 10 3.1 How to use UI interface…………………………………………….. 10
TXs Settings………………………………………………………… 11 Settings of Auto-scan…………………………………………… 12 User Login Interface …………………………………………….. 13 TX/RX Devices List ………………………………………………. 13
3.2 System Settings ………………………………………………………. 14 Equipment Info ……………………………………………………. 15 RX Settings …………………………………………………………. 16 Frame Push…………………………………………………………. 18 Frame Get……………………………………………………………. 18 Update ………………………………………………………………… 20 Hotkeys ………………………………………………………………. 21
4. Specifications ………………………………………………………………. 22
2
IP KVM Matrix Extender (KFH188S)
User Manual
1. Introduction
IP HD Digital KVM Matrix Extender is a highly optimized KVM extender. The
transmission distance can reach 150m for point-to-point connection with an
Ethernet cable, and the resolution is up to 3840×2160@30Hz. This series of
extenders can be connected to a Gigabit network switch to form a matrix switching
system, which can be networked independently without using a centralized
management platform, supporting up to 40 nodes; when using a centralized
management platform, it can support up to 9999 nodes according to the network
bandwidth. It supports fast non-black screen switching. The matrix switching system
can connect various kinds of signal sources, such as servers, workstations,
cameras, video TV walls, etc.
With the matrix switching system, computers and servers can be located in a central
server room away from the workbench to improve safety, reduce the temperature
and noise of the working environment, and achieve a quiet and friendly
human-computer interaction environment.
The video compression algorithm of the IP HD digital KVM matrix extender is a
perfect combination of high image quality and low latency (8ms/1080P@60Hz).
USB and video signals are transmitted via CAT5e/6/7 network cables or optical
fibers.
USB2.0 supports USB devices such as touch screens, USB sound cards, printers,
and also USB storage devices.
UI managing system initial administrator account: admin Password: admin
1.1 Function This product is designed to extend and switch USB peripherals such as keyboards, mice, U disks, and video signals. As a professional product, this product should not be used in any occasion with potential explosion risks. Please use this product in accordance with the instructions in this manual. Any use not in accordance with the instructions in this manual is considered abnormal use. The device connected to the source input end is called the transmitter (TX), and the device connected to the display end is called the receiver (RX).
3
IP KVM Matrix Extender (KFH188S) 1.2 Product Features
User Manual
1. HDMI / Audio/USB2.0 / Serial Port IP KVM Matrix Extender 2. Supports hot backup function with master and backup connections (dual optical or dual network connections or 1 optical /1 network connections) 3. Supports local (TX) HDMI interface loop-out 4. Visual lossless compression transmission, ultra-low latency (8ms@60Hz). Typical transmission bandwidth: 50~450Mbps 5. Graphical UI interface, intuitive and convenient port switching and other operations 6. Supports seamless switching between hosts without any black screen 7. USB transmission rate up to 480Mbit/s 8. Supports analog audio and microphone, supports digital audio 9. Maximum resolution 3840×2160@30Hz (YCbCr 4:4:4
10. Supports optical fiber transmission in single-mode or multi-model; the maximum transmission distance depends on the SFP type.
Supports CAT5e/6/7 transmission, and the maximum point-to-point extension distance is 150m 11. Up to 9999 devices networked with a centralized management platform for a matrix switching system : 12. Supports screen lock. 13. Supports one Administrator account and one User account. 14. Supports collaborative sharing Push & Get. 15. Supports remotely turn on/off the computers.
4
IP KVM Matrix Extender (KFH188S) 1.3 Safety Instructions
User Manual
Warning! Please read and understand all safety instructions. 1. Please follow all instructions, including preventing serious accidents such as fire and explosion. Please ensure that users who use this product have read and will follow these warnings and safety instructions. 2. Retain all safety information and guidelines for future reference and pass them on when delivering this product to a third party. 3. The manufacturer is not responsible for property and personal damage caused by users’ not following safety guidelines and abnormal use of this product. And in this case, the product warranty does not apply. 4. This product is not allowed to be used in environments with potential explosion risks. 5. Before use, please check whether this product and cables are damaged. If any visible damage, strong odor or overheating of components is found, please disconnect all connections immediately and stop using this product. 6. If this product is not installed and used in accordance with the instructions in the manual, it may cause interruptive interference to the radio environment or other electromagnetic devices in the surrounding area. Use shielded cables to connect components to avoid the above interference. 7. Please use the power adapter that comes with this product as the power source, and do not use other adapters. 8. Before powering on the product, make sure that the supply voltage meets the nominal specifications of the product. 9. This product must be connected to a fixed and grounded AC wall outlet. 10. Avoid squeezing or bending the cable, and the cable layout should avoid being tripped by people. 11. Avoid any damage to the power adapter 12. This product should be equipped with a suitable power socket that is easy to install and easy to reach, ensuring that the product can be powered off at any time. 13. When this product is not in use, it should be disconnected from the socket. 14. Do not touch the power adapter with wet hands. 15. Please use this product within the performance range specified by this manual.. 16. Please keep this product away from any flammable substances, such as curtains, etc. 17. Please avoid the power adapter being touched by any third party (such as children). 18. Do not place this product next to a heater. 19. Do not throw or hit this product.
5
IP KVM Matrix Extender (KFH188S)
1.4 Product Overview
1.4.1 KFH188S Transmitter (TX)
User Manual
No
1
2 3 4 5 6 7 8 9 10 11 12
Interface PWR1, PWR2 LINK1, LINK2
LED FIBER1, FIBER2 SLED
FIBER2, FIBER1 LAN2, LAN1 HDMI OUT HDMI IN RJ11 USB IN DBG AIN AOUT DC2, DC1
Description Power indicator Connection indicator Connection indicator of FIBER System indicator Ground the device Fiber interfaces LAN interfaces HDMI video loop out HDMI video input Serial Port USB-B, connect to PC or server Debug interface Audio input MIC output Connect to the 12V power supply
6
IP KVM Matrix Extender (KFH188S) 1.4.2 KFH188S Receiver (RX)
User Manual
No.
1
2 3 4 5 6 7 8 9 10 11 12 13 14
Interface
PWR1, PWR2
LINK1, LINK2
LED
FIBER1,
FIBER2
SLED
SW
USB2.0
FIBER2, FIBER1 LAN2, LAN1 HDMI OUT RJ11 DBG
DC2DC1
Description Power indicator Connection indicator Connection indicator of FIBER System indicator Button Connect to a USB keyboard Connect to a USB mouse Connect to USB2.0 peripherals Ground the device Fiber interfaces LAN interfaces HDMI video output Serial Port Debug interface MIC input Audio output Connect to the 12V power supply
7
IP KVM Matrix Extender (KFH188S)
User Manual
2. Installation
2.1 Install the extenders Warning! Please read and understand all safety instructions before installing the equipment. The extender can access a single PC at a point-and-point mode, and also can form a matrix switching system to access multiple PCs.
8
IP KVM Matrix Extender (KFH188S) Connection Diagram of KFH188S
Monitor
User Manual Computer or server
Power adapter
Monitor
MIC Speaker Power adapter
Keyboard Mouse 1. Make sure the KVM extenders (TX and RX) are grounded (Figure ) 2. Connect the transmitter (KFH188S_TX) to the host video interface, USB, and audio microphone interface (Figure ). 3. Connect the receiver (KFH188S _RX) to the monitor, audio, USB keyboard, and USB mouse (Figure ). 4. Connect the transmitter TX and receiver RX interfaces respectively through optical fiber or network cable (Figure ). 5. Power on the transmitter TX and receiver RX respectively (Figure ). 6. Connect the USB peripherals to the receiver (KFH188S _RX) (Figure )
9
IP KVM Matrix Extender (KFH188S)
User Manual
3. Extender Configuration
3.1 How to use UI interface Press the left [Ctrl] key on the keyboard three times in a row to display the UI main interface.
Toolbar Mode
SN TX-List Status QV
Description Node Matrix P2P
Scan devices in the list
TX and RX matching list
Setting Click Equipment setting-User Setting Passto logout user account Number of connected devices List of transmitters busy: Being accessed by someone else –busy– : Being accessed by me no video: No video input from the host connect : Accessible Select devices for scanning
Find the devices in the list
Auto Scan
10
IP KVM Matrix Extender (KFH188S)
User Manual
TXs settings
Double-click an item on the TX-List, and then the following TX setting table appears.
TX setting table: Toolbar
Description
Click “TX-0234b3616d6b” in the Name setting window to modify the TX name and then click ESC button to confirm your modification.
Rename TX devices. Take TX-0234b3616d6b as an example
Reboot
Restore settings
Bit Rate
factory
Network mode
Scan time
EN: English CN: Chinese Switch: Switch between upper and lower cases Reboot the device
Restore Factory Defaults
Auto , 10M ,50M, 100M, 150M, 200M Multicast mode Unicast mode 10s, 20s, 30s, 60s , 90s ,120s, 150s, 180s ,210s,255s
Blink EDID
Enable PWR led to blink to locate the TX device.
AUTO, 1024×768, 1280×1024, 1366×768, 1600×900 , 1920×1080,1920×1200,2560×1440, 3840×2160, 1152×864, 2048×2048,1600×1200,1920×1920,2160×2160,2560×1600, 3840 x1080, 4096 x1080, 2560 x2880
11
IP KVM Matrix Extender (KFH188S)
Settings of Auto-scan Select TX devices, click the QV icon, and then click selected devices (default scan time: 10s).
User Manual to automatically scan the
Scan time optional: 10s, 20s, 30s, 60s, 90s, 120s, 150s, 180s, 210s ,255s
12
IP KVM Matrix Extender (KFH188S) User Login Interface
The default setting mode is
User Manual See User Account Setting page
17, the login interface will only appear after clicking the icon
User Name Password:
admin admin
TX/RX Devices List
Click , then the below menu appears, and al the connected TX and RX devices show on this menu.
13
IP KVM Matrix Extender (KFH188S) 3.2 System Settings
Click , then the below table appears.
User Manual
Toolbar Equipment Info Equipment Setting Frame Push
Frame Get Update Hotkeys
Description To switch on/off USB, Audio, KM, Get & Push
System and RX Settings
Push the video and USB signals from current receiver to the chosen receiver in the list
Get the video and USB signals from any receiver in the list to the current receiver Update device Hotkeys Info
14
IP KVM Matrix Extender (KFH188S) Equipment info
Select to switch on/off the system state.
User Manual
Toolbar Usb2.0 Audio KM Share
Description USB2.0 functions Audio function Keyboard and Mouse Push video & Get video
15
IP KVM Matrix Extender (KFH188S) RX Settings
User Manual
Toolbar Rename RX All blink Reboot Restore factory System mode Network mode
Edid Sync
Output timing Password mode
Description
Click “RX-8220785f097” to change the name of RX, and then click ESC confirm your modification.
Enable PWR led to blink on all TX devices.
Reboot device
Restore factory defaults
Matrix mode P2P mode Node mode Multicast Unicast AUTO, 1024×768, 1280×1024, 1366×768, 1600×900 , 1920×1080,1920×1200,2560×1440,3840×2160, 1152×864,2048×2048,1600×1200,1920×1920, 2160×2160, 2560×1600, 3840 x1080, 4096 x1080, 2560 x2880 1080P@60,2160P@60,640x480P@60, 800x600P@60, 1024x768P@60,1280x1024P@60,1366×768,1440×900, 1920×1200, STRICT PASS, AUTO PASS
Modify user account and set permissions
16
IP KVM Matrix Extender (KFH188S) User Account Setting:
User Manual
Click
then the button turns green
, then can modify account password
and set permissions. * You can’t set the accounts info in Node mode. It can only
be set on the management control unit.
Toolbar Password Permissions
Description Double click to change the password respectively Set permissions on USB2.0, Audio, KM, Get &Push
17
IP KVM Matrix Extender (KFH188S) Frame Push
User Manual
Click “Push” to push the video and USB signals from current receiver to the chosen receiver in the list.
Frame Get
Click “Get” to get the video and USB signals from any receiver in the list to the current receiver.
18
IP KVM Matrix Extender (KFH188S) Connection Diagram of Collaborative Sharing Push & Get
User Manual
19
IP KVM Matrix Extender (KFH188S) Update
User Manual
Click “RX” to update RX Click “TX” to update TX
20
IP KVM Matrix Extender (KFH188S) Hotkeys
User Manual
Toolbar Left _Ctrl Left_ Shift Right_ Ctrl Right_ Ctrl+ Double1-0
Description Show or hide the UI interface Stop accessing the current TX Access the next TX Switch among the Txs
21
IP KVM Matrix Extender (KFH188S)
4. Specifications
User Manual
Specifications
KFH188S_TX
KFH188S_RX
HDMI input
1
N/A
HDMI output 1
1
Power
12V x 2
12V x 2
Connections
LAN port
Optical Module port
Mic
RJ45 x 2 SFP+ x 2 3.5MM Stereo Jack (Green)
RJ45 x 2 SFP+ x 2 3.5MMStereoJack(Pink)
Speaker
3.5MM Stereo Jack (Pink)
3.5MMStereoJack(Green)
USB type B
1
N/A
USB
N/A
4
Max resolution
3840*2160@30Hz
Connection cable
CAT5e/6/7 or Optical Fiber Cable
Input Power Supply
DC12V / 3A
DC12V / 3A
Power consumption
15W
15W
Operating temperature range 0–50
Storage temperature range
-20–60
Humidity range
0–80% RH, non-condensing
Material
Metal
Net weight (kg)
1.78 kg
1.8kg
Device dimension (W×D×H) 317mm x 216.1 mm x 44mm
Package dimension (W×D×H) 395mm x 274 mm x110 mm 395mm x 274 mm x110 mm
22
Documents / Resources
![]() |
kinan KFH188S IP KVM Matrix Extender [pdf] User Manual KFH188S IP KVM Matrix Extender, KFH188S, IP KVM Matrix Extender, Matrix Extender |