KiiBOOM Breeze75 Mounted Mechanical Keyboard With Rotary
75% Triple-mode Acrylic-Aluminum Gasket-mounted Mechanical Keyboard with Rotary Knob
SPECIFICATIONS
- MODEL: KiiBOOM Breeze 75
- KEYS AMOUNT: 81 Keys
- MOUNTING TYPE: Gasket
- CASE MATERIAL: Full Acrylic + Aluminum
- PLATE MATERIAL: PC
- STABILIZER TYPE: Plate-mounted
- DIMENSION: 325 × 140 x 45 mm
- PCB TYPE: 3/5-pin Hotswap PCB
- CONNECTIVITY: Type-C Wired, Bluetooth, 2.4G
- ANTI-GHOST KEY: NKRO
- LED DIRECTION: South-facing
- POLLING RATE: 1000hz under Wired and 2.4G Mode: 125hz under Bluetooth Mode
- BATTERY CAPACITY: 4000mAh + 4000mAh
- COMPATIBILITY: WINDOWS/MAC
- WEIGHT: Around 1.5kg
BASIC FUNCTION
FUNCTION KEY COMBINATIONS
LIGHT EFFECTS
PAIRING INSTRUCTIONS
PAIRING BLUETOOTH
Toggle the switch to the BT side, make sure that the keyboard is under the Bluetooth mode:
- Hold Fn+1/2/3 for 3-5 seconds till the indicator flashes fast, the keyboard is ready to pair.
- Turn on your Bluetooth device and find “KIIBOOM Breeze 75”, then connect. When the keyboard is connected to the Bluetooth device, the indicator stops flashing and the connection is done.
- Press Fn+1/2/3 to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHz
Toggle the switch to the 2.4G side, make sure that the keyboard is under the 2.4G wireless mode:
- Hold Fn +4 for 3-5 seconds till the indicator flashes fast, the keyboard is ready to pair.
- Insert the 2.4G dongle to your computer. When the keyboard is connected, the indicator stops flashing.
WIRED MODE
- Toggle the switch to the middle and plug the keyboard.
Note: The battery charges under either wireless or wired mode, as long as the keyboard is plugged.
INDICATOR
- Low Battery: Left CtrI key blinks red
- Charing: Left Ctrl key stays red
- Charged: Left CtrI key lights up with a backlight
- Win Lock: Win key lights up
- Wired Mode: 5 key lights up for 2s
BATTERY CHECK
- Hold Fn+Backspace, the keys from 1 to 0 lights up to show the battery percentage; for example, if the keys from 1 to 6 light up when holding Fn+ Backspace, it means that the battery life is currently 60%; if keys of 1-Olight up, battery life is 100%.
Switches Instructions
- Keycap Puller
- Switch Puller
- Switch Pins
Before installing switches, be sure the pins are clean and straight.Push the Switch Straight Down into the switch slot.
Please be gentle. Be sure the pins are aligned with the slots.
REMOVE SWITCHES
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
INSTALL SWITCHES
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically. The pins should align themselves to the keyboard PCB.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work its possible you may have bent one of the switches while installing it.
Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
WARRANTY
KiBOOM’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to KiiBOOM.
We provide a 1 year warranty for our products when bought from our website (KiBOOM.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.
Contact
Manufactured in China by KiBOOM.
eVatmaster ConsultingGmbH
- Bettinastr.30 60325 Frankfurt am Main,Germany
- contact@evatmaster.com
EVATOST CONSULTING LTD
- Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
- contact@evatmaster.com
Scan
Documents / Resources
 |
KiiBOOM Breeze75 Mounted Mechanical Keyboard With Rotary [pdf] Instruction Manual Breeze75, 64, Breeze75 Mounted Mechanical Keyboard With Rotary, Breeze75, Mounted Mechanical Keyboard With Rotary, Mechanical Keyboard With Rotary, Keyboard With Rotary, With Rotary, Rotary |