KIDO SPORTS LINK-1 Bluetooth Intercom
Overview
The LINK-1 product provides intercom functions with mobile phone functions through a mobile phone device connection, intercom communication between the intercom devices themselves, mobile phone call connection, and mobile phone music listening.
Intercom is a Bluetooth communication device built-in battery, composed of microphones and speakers other than the main device, and controls functions mainly through buttons, voice commands, or mobile phone apps. (For reference, the purpose of the speaker is to listen to music or hear the other person’s voice.)
Function
Installation
- Refer to the photo below and install the product so that it is in the left-center part of the helmet.
- ‘LINK-1’ must be used at least 30mm away from the human body.
- When installing the ‘LINK-1’, the maximum separation distance from the human body is 45.389mm.
- When installed in that location, a separation distance of more than 35.945mm is ensured.
RF Specification
- Bluetooth v5.3
- Frequency: 2.4GHz (2.4000GHz – 2.4835GHz)
Power
- Battery: Li-ion Polymer 900mAh
- Operating Time more than 1212 hours Power DC 3.7V
Certification Information
- Company: KIDO SPORTS CO., LTD
- Product Name: BLUETOOTH INTERCOM
- Model Name: LINK-1
- KC Certification Number RC-kSN-LINK-1
- FCC ID:2BEYM-LINK-1
- IC 2025-LINK1
Manufacturing Date
- AS Contact:0-031-xxxx
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void your authority to operate the equipment under FCC rules. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The license-exempt transmitter/receiver contained in this device complies with the Innovation, Science and Economic Development Canada RSS applicable to license-exempt radio devices. Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference received, including interference that may cause undesired operation.
FCC and IC RF Radiation Exposure Statement
This equipment complies with FCC and IC RF Radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 30mm between the radiator and your body.
FCC and IC RF Radiation Exposure
This equipment complies with FCC and IC RF radiation exposure limits set forth for an uncontrolled environment. The antenna for this transmitter must not be co-located with any other transmitter except by FCC and IC Multi-Transmitter Product procedures. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Documents / Resources
 |
KIDO SPORTS LINK-1 Bluetooth Intercom [pdf] User Manual 2BEYM-LINK-1, 2BEYMLINK1, LINK-1 Bluetooth Intercom, LINK-1, Bluetooth Intercom, Intercom |
