KICKER CDF10 CDF Subwoofer Enclosures
Package Contents
- GDF Subwoofer Enclosure
- [4] Vehicle Mounting Screws
- [8] Subwoofer Enclosure Mounting Screws
- [4] Mounting Brackets
Specifications
Model: | CDF10 | CDF12 |
Woofer [in, cm] | 10, 25 | 12,30 |
Peak Power Handling [Watts] | 300 | 300 |
Recommended Amplifier Power [Watts RMS] | 75-150 | 75-150 |
Rated impedance [Ω] | 4 | 4 |
Frequency Response [Hz] | 30-500 | 27-500 |
Sensitivity [1W, 1m] | 90.8dB | 92.3dB |
Enclosure Depth [in, cm] | 12 1/4, 31 | 14 3/16, 36 |
Enclosure Height [in, cm] | 71/16, 17 9 | 77/8,19.5 |
Enclosure Width [in, cm] | 20 11/16, 52.5 | 227/8,58 |
Wiring
Connect wiring to terminals
Mounting
Secure enclosure to desired location.
KICKER products are warranted against defects. Duration and terms of warranty depend on the laws in the country in which it was purchased. For details see your local KICKER Dealer or www.kicker.com/warranty.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Please use common sense when controlling volume.
Documents / Resources
![]() |
KICKER CDF10 CDF Subwoofer Enclosures [pdf] Owner's Manual CDF10, CDF12, CDF10 CDF Subwoofer Enclosures, CDF10, CDF Subwoofer Enclosures, Subwoofer Enclosures |