KEYPLUS K7 Smart Lock

Door opening direction

Shift the left and right handle opening.

According to your need, to adjust the left and right handle opening by a screw driver to release the screw, then turn the handle 180 degrees, and then fix the screw.
Note: Do not unscrew the screw in the handle hole; if it is broken when you do that, you will not have any warranty.

Adjust the mortise direction

According to your need to adjust the mortise direction

Caution before installation

Installation

Check points after installation.n

1. The smart lock is horizontal with the door.
2. The Latch bolt, Deadbolt,lt, and Security Bolt work smoothly and flexibly.
3. The Front lock is vertical and stable.

Deadbolt setting

The deadbolt area is read-only;d, a non-admin user cannot unlock unless it is an admin user or unlocks with a key.

Smart Lock User Interface Operation

Wake up the screen by touching keyboard, press the “*” and “#” keys then input initialize password 123456 and *#” ke to enter initialize menu: (After enter menu, press”* key to return/ press *#” key to confirm) B. First time entering main menu, need to record new password (6 digits with #” key to confirm and repeat) or fingerprint (6 times) as admin user, press “#” key to confirm. Wake up the screen by touching the keyboard, press the “*” and #” keys, then input the admin password and *#” keyor fingerprint to enter the main menu:

Add Users

1. Press 1 to record a new password (6 digits with # key to confirm and repeat again) or fingerprint (6 times) as a normal user, press # key to confirm.
2. Del Users Press 2 to enter the user no. which need to del then press the # key to confirm.
3. Normally open mode. Press 3 to enable and again to disable. 4: Mute mode Press 4 to enable and again to disable.

How does the smart lock connect to theTuyaa app? ( Suitable for models: 610 & 620 Tuya)

1. Open your mobile phone and scan the following QR code to download the app.
2. After registering the user, select” Lock Wi-Fi” in “security & sensor” and connect to Wi-Fi according to the software instructions. (onlysupportst Wi-Fnetworksrk the 2.4G band), operate the smart lock to enter the main menu to active connection mode (when entering the main menu, the blue light will start flashing), then connect the smart lock to the network.

Remote unlock function

1. Ensure that the WIFI module has been connected to the cloud, and the APP can view the device.
2. Press “9” + “#” on the door lock to wake up the Tuya module, and the module indicator will light up.
   (Some door locks wake up the module when they are touched; you do not need to press 9#, please operate according to the actual situation.
3. Wait for the module to be connected to the cloud. On the home page of the APP interface, the button “Click to open the door remotely” will appear. After clicking, it will confirm whether to unlock or not.
4. After confirming the unlocking, the door lock will be unlocked, and the APP side will report the remote unlocking record (Note: There is no record reporting in the initialization state, and a user needs to be entered before the door opening record can be reported).

Remote dynamic password

1. Make sure that the wireless module has been detected at the door lock end, and check the detection information when it is powered on.
2. Ensure that the time of the door lock is accurate with the Beijing time. If the door lock time is not set, please manually enter the administrator setting interface to set the correct time (Note: For some devices without a screen that do not have a time to display or broadcast, this step can be ignored)
3. Click “click to get” under the remote dynamic password on the APP side to get the password.
4. Press “9” + “#” on the door lock to wake up the Tuya module, and the module indicator will light up. (Some door locks are in the touch-to-wake mode)
5. Enter the dynamic password. After the verification is successful, the door lock will be unlocked, and the unlock record will be reported.
   Note: The dynamic password will change every 5 minutes, and each password can be unlocked an unlimited number of times.

Temporary password

1. Similar to the dynamic password, first ensure that the wireless module has been detected at the door lock end and the time has been calibrated.
2. Create a temporary password on the APP side, enter the password, name, and valid time, and “to be issued” will be displayed after creation.
3. Press “9” + “#” on the door lock to wake up the T12. Temporary password uya module, and the module indicator will light up. (Some door locks wake up the module when they are touched. You do not need to press 9#; please operate according to the actual situation.
4. Wait for the connection to be cestablished After connecting to the Internet, the temporary password of the cloud will be obtained. The status of the temporary password will change from “to be issued” to “in use”, and it can be used.
5. Enter the temporary password. After the verification is successful, the door lock will be unlocked, and the door opening record will be reported. (Note: Unlike the dynamic password, there is no need to wake up the module and then enter the password.)
   Note: The temporary password can be unlockedan unlimited number of times within the valid period.

Technical Parameters

Technical Parameters
	Items	Parameters	Memo
1	Quiescent current	≦50uA
2	Dynamic current	≦180mA
3	Administrators’ number	3
4	Fingerprint number	50
5	Number of Password storage	100
6	Number of Card storage	110
7	Fingerprint contrast time	≦0.6Second
8	Fingerprint scanner	semiconductor
9	Fingerprint identification Angle	360°
10	True Rejection Rate	≦0.15% ≦
11	Recognition Rate	0.00004
12	Reaction time	≦0.5 Second
13	Power type	6V
14	Emergency powering	5VDC
15	Working temperature	-25°C~60°C
16	Working Relative Humidity	5%~95%RH
17	KBD	Touch standard 12-bit keyboard
18	Password Length	6bit
19	Phantom password	16bit
20	Low-voltage alarm	4.8±0.2V
21	Unlock time	≦1Second
22	Human voice	Yes
23	Power supply	4.5~6.5V(4pcs AAA batteries), up to 182days working time (unlock 10 times/day)

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with the CC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body. Use only the supplied antenna.

Documents / Resources

KEYPLUS K7 Smart Lock [pdf] Instruction Manual K7, K7 Smart Lock, Smart Lock, Lock

References

• User Manual