KEYCOOL logoKEYCOOL K19 Wireless Numeric KeyboardK19
User Manual
Customer Services: support@keycool.vip

K19 Wireless Numeric Keyboard

Model: k19
Layout: 20% Layout, 19-Key and 1 Knob
Backlights: South-Facing RGB
Connection: Bluetooth, 2.4G Wireless, TYPE-C Wired
Weight of Product: 219.5±10g/0.48±0.02lb
Size of Product: 92*136*41mm/3.62*5.35*1.61inch
Hot Swappable: Full keys hot-swappable, support 3/5 pins hot swappable switches
Packing List: Keyboard, USB Cable for TYPE-C, 2.4G Dongle, Switch and Keycap Puller, Manual, Extra Keycaps and Switches
Battery: 1500mAh
Structure:Gasket
Polling Rate: 1000HZ
Software: Windows
Кеусар: Dye Sublimation XDA Profile PBT Keycaps
System: Windows/Mac/Linux/Android/iOS

k19 Switch, Indicator, and Knob Instruction

Keyboard Switches:KEYCOOL K19 Wireless Numeric Keyboard - overview

  1. Keyboard ON/OFF Switch
  2. Type-C Port
  3. 2.4G Slot

Indicators:

KEYCOOL K19 Wireless Numeric Keyboard - overview 1

  1. BATTERY
  2. NUM LOCK
  3. CONNECTION

Multi-Function Knob (Default Multimedia Mode):

KEYCOOL K19 Wireless Numeric Keyboard - overview 2 Switching Mode:
Short press FN+Knob to switch Multimedia/RGB knob control mode.
Multimedia Mode:
Short press the knob is ESC, turn clockwise (rotate to the right), to turn up the volume; Turn counterclockwise (rotate to the left), to turn down the volume.
RGB Mode:
Short press the knob is ESC, turn left and right to adjust the backlight brightness.
NOTE:
The knob function can be customized by the software.

Connections

KEYCOOL K19 Wireless Numeric Keyboard - icon 1 Bluetooth Connection:KEYCOOL K19 Wireless Numeric Keyboard - icon 5

  1. Turn on the keyboard ON/OFF button.
  2. Short press FN+1/2/3 to select a channel of Bluetooth, and the connection indicator will flash Red/Blue/Yellow slowly.
  3. Long press FN+1/2/3 to the Bluetooth pairing mode, the connection indicator will flash Red/Blue/Yellow fast.
  4. Select the k19 3.0/k19 5.0 to connect it, and the RGB will stay on when paired successfully.

Note: If the pairing fails, the keyboard indicator flashes slowly, please reconnect it.
KEYCOOL K19 Wireless Numeric Keyboard - icon 2 2.4G Connection:KEYCOOL K19 Wireless Numeric Keyboard - icon 6

  1. Turn on the keyboard ON/OFF button.
  2. Short press the FN+4 to select the 2.4G channel, and the connection indicator will flash Green slowly.
  3. Long press FN+4 to the 2.4G pairing mode, the connection indicator will flash Green fast.
  4. Plug the 2.4G dongle into your device, the device will automatically recognize your keyboard, and the RGB will stay on when paired successfully.

Note: If the pairing fails, the keyboard indicator flashes slowly, please reconnect it.
KEYCOOL K19 Wireless Numeric Keyboard - icon 3 Wired TYPE-C Connection:KEYCOOL K19 Wireless Numeric Keyboard - icon 7
Switch the keyboard ON/OFF button to the OFF, and connect the keyboard to your device by the cable that comes with the package. After the keyboard is automatically recognized, the connection is successful.
Note:Without turning off the ON/OFF button, you can press the FN+5 to the wired channel, using the cable that comes with the package to connect the keyboard to your device in wired mode.

Backlights and Shortcuts

Default 18 Backlight Modes, 9 Colors, and Customizable Backlights, Keys and Knob

KEYCOOL K19 Wireless Numeric Keyboard - button 1 (35) Reset
KEYCOOL K19 Wireless Numeric Keyboard - button 2 BTT
KEYCOOL K19 Wireless Numeric Keyboard - button 3 812
KEYCOOL K19 Wireless Numeric Keyboard - button 4 BT3
KEYCOOL K19 Wireless Numeric Keyboard - button 5 2.4G
KEYCOOL K19 Wireless Numeric Keyboard - button 6 Wired
KEYCOOL K19 Wireless Numeric Keyboard - button 7 Change Backlight Effect
KEYCOOL K19 Wireless Numeric Keyboard - button 8 Change Backlight Color
KEYCOOL K19 Wireless Numeric Keyboard - button 9 Calculator (Windows only)
KEYCOOL K19 Wireless Numeric Keyboard - button 10 Blinking Speed↓
KEYCOOL K19 Wireless Numeric Keyboard - button 11 Blinking Speed ↑
KEYCOOL K19 Wireless Numeric Keyboard - button 12 Change Knob Backlight Effect
KEYCOOL K19 Wireless Numeric Keyboard - button 13 Change Knob Backlight Color
KEYCOOL K19 Wireless Numeric Keyboard - button 14 Check Battery Level
KEYCOOL K19 Wireless Numeric Keyboard - button 15 Saving Mode (Backlight ON/OFF)
KEYCOOL K19 Wireless Numeric Keyboard - button 16 Switch the Knob Control Mode

Battery: FN+.
Low Power Mode&Charging
When the battery is lower than 10%, the Battery Indicator will flash Red fast; When charging, the Battery Indicator will stay on Red; After charging is complete, the Battery Indicator will go off.
Battery Query

* 10%
3 20%
6 30%
9 40%
* 80%
Fn 100%

In wireless mode (Bluetooth/2.4G), press and hold the FN+. to check the battery level, the keys “.” to “FN” will light up to display the power ratio, and the backlights will turn off. When released, the keyboard returns to its previous lighting mode.
Power Saving Mode
When connected wirelessly (Bluetooth/2.4G), if there is no operation within 2 minutes, the keyboard enters sleep mode. The lights will turn off and the keyboard in the connected state. When the keyboard is awakened, characters are output at the same time.

KEYBOARD SOFTWARE

Download method:

  1. Open the official website of www.kc-keycool.com click on the software.
  2. Unzip the downloaded software package and click the exe file to install.
  3. After the installation is complete, use the wired mode to connect to the computer, and the software will automatically recognize the keyboard.
  4. After the connection is completed, start using the software.

Driver download and installation
System Support: Windows
Email: support@keycool.vip
Driver update
Open the software and click Update software in the lower right corner to get the latest version of the software.

REPLACE KEYCAPS AND SWITCH

Included Tools
KEYCOOL K19 Wireless Numeric Keyboard - ToolsMechanical SwitchKEYCOOL K19 Wireless Numeric Keyboard - KEYCAPS AND SWITCHRemove Keycaps

  1. Grab your Keycap Puller Tool and place it above the keycap you want to remove at a 90 degree angle.
  2. Push your Keycap Puller down until the metal hooks to open themselves and grab the keycap from underneath.
  3. Grab your Keyboard firmly and pull the keycap in a vertical motion.

Install Keycaps

  1. Make sure the Keycap is properly oriented in your keyboard and place it above the switch.
  2. Push the keycap into the switch shaft firmly.

Install Switches

  1. Check that all the switch metallic pins are perfectly straight and clean.
  2. Align the switch lamp hole with the backlight, The pins align themselves to the keyboard PBC.
  3. Ppress the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
  4. Inspect the switch to ensure it’s properly attached to your keyboard, and test it.

Remove Switches

  1. Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, asshown in the example graphic above.
  2. Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
  3. Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
  4. Check whether the shaft is triggered normally

KEYCOOL K19 Wireless Numeric Keyboard - icon 4 Note: if the key doesn’t work, you may have bent one of the switches while installingit. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacingkeycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as son aspossible to avoid damage to the keyboard due to operating errors.KEYCOOL logo

Documents / Resources

KEYCOOL K19 Wireless Numeric Keyboard [pdf] User Guide
K19 Wireless Numeric Keyboard, K19, Wireless Numeric Keyboard, Numeric Keyboard, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *