Quick Start Guide
V2 Wired Custom Mechanical Keyboard
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
- switch To The Right System Please make sure the system toggle on the top left corner has been switched to the same system as your computer’s operating system.
- The VIA Key Remapping Software
Please visit caniusevia.com to download the latest VIA software to remap the keys.
If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.
- The Layers
There are v ayers f key settings onthe keyboard.
The laye O or the Mac system.
The ayer 1 for the Windows syt
The yer 21 forthe Mac Mukimedia ke,
The yer 3 s forthe Windows Mutmedia ke
The ayer 4 s for the Function keys.
ify our system toggle i sitched toMac then the layer Owil be actvated.
If your system toggle s switched toWindows, then the fayer 1wl be activated.
- Multimedia Key and Function Key
- The Backight
- Adiust The Backlight Brightness
- Adiust The Backlight Speed
- Warranty
The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.
Warranty - Wateh Ther Bulinding Tutorial On Our Website
If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself. - Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
(1) Try factory reset by pressing fnl +J + Z (for 4 seconds).
(2) Download the right firmware for your keyboard from our website.
Remove the power cable from the keyboard.
(3) Remove the space bar keycap to find the reset button on the PCB.
(4) Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
(5)Flash the firmware with the QMK Toolbox.
* Factory reset the keyboard again by pressing fn1 + 1 + Z (for 4 seconds). Step by step guide can be found on our website.
V2 Knob Version Keymap JSON file:
https://cdn.shopify.com/s/files/1/0059/0630/1017/files/V2_US_ANSI_Knob_ver1.2.json.zip?v=1662437486
VIA Software for macOS:
https://github.com/the-via/releases/releases/download/v1.3.1/via-1.3.1-mac.dmg
VIA Software for Windows:
https://github.com/the-via/releases/releases/download/v1.3.1/via-1.3.1-win.exe
VIA Software for Linux:
https://github.com/the-via/releases/releases/download/v1.3.1/via-1.3.1-linux.deb
How to Use VIA on Your Keychron V Series Keyboard:
https://www.keychron.com/blogs/archived/how-to-use-via-to-program-your-keyboard
V2 Source Code:
https://github.com/Keychron/qmk_firmware/tree/playground/keyboards/keychron/v2
Not Happy
Support@Keychron.com
Documents / Resources
 |
Keychron V2 Wired Custom Mechanical Keyboard [pdf] User Guide V2, V2 Wired Custom Mechanical Keyboard, Wired Custom Mechanical Keyboard, Custom Mechanical Keyboard, Mechanical Keyboard, Keyboard |