Keychron V2 Customizable Keyboard User Manual

Fully Assembled Version

Keyboard

• 1x Fully Assembled Keyboard
  

Including

• 1x Case
• 1x PCB
• 1x Steel Plate
• 1x Sound Absorbing Foam
• 1x Silicone Bottom Pad
• 4 Sets x Stabilizers
• 1 Set x Keycaps (PBT  Double-shot)
• 1 Set x Switches

Cable

• 1x Type-C to Type-C Cable
• 1x Type-A to Type- C Adapter

Tools

• 1x Switch Puller
• 1x Keycap Puller
• 1x Screwdriver
• 1x Hex Key

Barebone Version

Keyboard Kit

• 1x Keyboard Kit(Without Keycaps & Switches)
  

Including

• 1x Case
• 1x PCB
• 1x Steel Plate
• 1x Sound Absorbing Foam
• 1x Silicone Bottom Pad
• 4 Sets x Stabilizers

Cable

• 1x Type-C to Type-C Cable
• 1x Type-A to Type-C Adapter

Tools

• 1x Switch Puller
• 1x Keycap Puller
• 1x Screwdriver
• 1x Hex Key

QUICK START GUIDE

If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.

Mac / Windows

Switch To The Right System

Please make sure the system toggle on the top left corner has been switched to the same system as your computer’s operating system.

The VIA Key Remapping SofMare

Please visit caniusevia.com to download the latest VIA software to remap the keys. If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.

The Layers

• There are five layers ot key settings on the keyboard.
• The layer 0 is for the Mac system.
• The layer 1 is for the Windows system.
• The layer 2 is for the Mac Multimedia keys.
• The layer 3 is for the Windows Multimedia keys.
• The layer 4 is for the Function keys.
  

It your system toggle is switched to Mac, then the layer 0 will be activation.

If your system toggle is switched to Windows, then the layer 1 will be activated.

Multimedia Key and Function Key

Multimedia keys

Function keys

In order to get Multimedia Key, you need to press fn1 and Key.
In order to get Function Key, you need to press fn2 and Key.

The Backlight

• Press fn1 + Q to change the lighting effect.
  
• Press fn1+ tab to turn the backlight on/off.
  

Adjust The Backlight Brightness

• Press fn1+ W to increase the backlight brightness
  
• Press Int + S to decrease the backlight brightness
  

Adjust The Backlight Speed

• Press fn1+ T to increase the light effect speed
  
• Press fn1+G to decrease the light effect speed.
  

Watch The Building Tutorial On Our Website

If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.

Factory Reset

Troubleshooting? Don’t know what’s going on with the keyboard?

1. Try factory reset by pressing fn1+ J + Z (for 4 seconds).
2. Download the right firmware for your keyboard from our website. Remove the power cable from the keyboard.
3. Remove the space bar keycap to find the reset button on the PCB.
4. Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
5. Flash the firmware with the QMK Toolbox.
6. Factory reset the keyboard again by pressing fn1+ J + Z (for 4 seconds).
   *Step by step guide can be found on our website.

V2 CUSTOMIZABLE KEYBOARD SPECIFICATIONS

V2 MECHANICAL KEYBOARD OVERVIEW

1. Type-C Port
2. Mac Layout
3. Windows Layout

DEFAULT KEY LAYOUT

LAYER 0: This layer will be activated when your keyboard’s system toggle is switched to Mac.

1. LAYER 1: This layer will be activated when your keyboard’s system toggle is switched to Windows.
   
   LAlt = Left Alt LWin = Left Windows RAlt = Right Alt
2. LAYER 2: This layer will be activated when your keyboard’s system toggle is switched to Mac and press the fnl/M0(2) key.
   
3. LAYER 3: This layer will be activated when your keyboard’s system toggle is switched to Windows and press the fnl/MO(3) key.
   
4. LAYER 4: This layer will be activated when you press the fn2/MO(4) key.
   

KEY DESCRIPTION

Third party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of Windows/macOS, functionalities of third party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.

Certain fn keys or multimedia keys does not work under Windows/Android mode.
Functionalities of certain multimedia keys may be disabled due to compatibility, versions, brands and drivers of Windows/Android OS.

Safety Precaution

Keep the product, accessories and packaging parts out of reach of children to prevent any accidents and choking hazards.
Always keep the product dry to avoid corrosion.
Do not expose the product to extreme temperatures below -10°C (5°F) or above 50°C (131°F) to preserve the lifespan of the keyboard.

Warranty

The keyboard is highly customizable and easy to be rebuilt.
If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.

Support

Keychron, Inc.
Dover, DE 19901, United States
Find us at:
https://www.keychron.com
Support@keychron.com
@keychron
@keychron
@keychronMK
Designed by Keychron
Made in China

Documents / Resources

Keychron V2 Customizable Keyboard [pdf] User Manual V2 Customizable Keyboard, V2, Customizable Keyboard, Keyboard

References

• User Manual