Q1 CUSTOMIZABLE KEYBOARD USER MANUAL 
Q1 Knob Version Keymap JSON file:
https://cdn.shopify.com/s/files/1/0059/0630/1017/files/q1_us_ansi_knob_ver2.04.json.zip?v=1650248037
VIA Software for macOS:
https://github.com/the-via/releases/releases/download/v1.3.1/via-1.3.1-mac.dmg
VIA Software for Windows:
https://github.com/the-via/releases/releases/download/v1.3.1/via-1.3.1-win.exe
VIA Software for Linux:
https://github.com/the-via/releases/releases/download/v1.3.1/via-1.3.1-linux.deb
How to Use VIA on Your Keychron V Series Keyboard:
https://www.keychron.com/blogs/archived/how-to-use-via-to-program-your-keyboard
Fully Assembled Version
Keyboard
1x Fully Assembled Keyboard
Including
1x Aluminum Case
1x PCB
1x Steel Plate
1x Sound Absorbing Foam
1x Case Foam
16x Gaskets (8 Installed and 8 in the Box)
4 sets x Stabilizers
1 set x Keycaps (PBT Double-shot)
1 set x Switches (Gateron G Pro)
Cable
1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter
Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key
Barebone Version
Keyboard Kit
1x Keyboard Kit (Without Keycaps & Switches)
Including
1x Aluminum Case
1x PCB
1x Steel Plate
1x Sound Absorbing Foam
1x Case Foam
16x Gaskets (8 Installed and 8 in the Box)
4 sets x Stabilizers
Cable
1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter
Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key
QUICK START GUIDE
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
Mac / Windows
1 Switch To The Right System
Please make sure the system toggle on the top left corner has been switched to the same system as your computer’s operating system.
2 The VIA Key Remapping Software
Please visit caniusevia.com to download the latest VIA software to remap the keys. If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.
3 The Layers
There are four layers of key settings on the keyboard. The layer 0 and layer 1 are for the Mac system. The layer 2 and layer 3 are for the Windows system.
If your system toggle is switched to Mac, then the layer 0 will be activated.
If your system toggle is switched to Windows, then the layer 2 will be activated. Remember that if you are using it in Windows mode, please make changes to the layer 2 instead of the top layer (the layer 0) This is a common mistake people are making.
4 The Backlight
Press fn + Q to change the lighting effect
Press fn + tab to turn the backlight on/off
5 Adjust The Backlight Brightness
fn + W to increase the backlight brightness
fn + 5 to decrease the backlight brightness
6 Warranty
The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.
7 Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.
8 Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
(1) Try factory reset by pressing fn +J +Z (for 4 seconds)
(2) Download the right firmware for your keyboard from our website. Remove the power cable from the keyboard.
(3) Remove the space bar keycap to find the reset button on the PCB.
(4) Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
(5) Flash the firmware with the QM K Toolbox.
(6) Factory reset the keyboard again by pressing fn + Z (for 4 seconds)
* Step by step guide can be found on our website
Q1 CUSTOMIZABLE KEYBOARD SPECIFICATIONS
|
Specifications |
|
| Layout | 75% |
| Switch type | Mechanical |
| Width | 145 mm |
| Length | 327.5 mm |
| Front height | 21.6 mm (without keycaps) |
| Back height | 34.8 mm (without keycaps) |
| Front height | 32.2 mm (with OSA keycaps installed) |
| Back height | 44.2 mm (with OSA keycaps installed) |
| Keyboard feet height | 2.4 mm |
| Angle | 5.2 degree |
Q1 MECHANICAL KEYBOARD OVERVIEW
Mac
Windows
(1) Type-C Port
(2) Mac Layout
(3) Windows Layout
DEFAULT KEY LAYOUT:
LAYER 0: This layer will be activated when your keyboard’s system toggle is switched to Mac.
LAYER 1: This layer will be activated when your keyboard’s system toggle is switched to Mac and press the fn/MO(1) key.
LAYER 2: This layer will be activated when your keyboard’s system toggle is switched to Windows.
LAYER 3: This layer will be activated when your keyboard’s system toggle is switched to Windows and press the fn/MO(3) key.
KEY DESCRIPTION
| Key Description | |
| Scr- | Screen Brightness Decrease |
| Scr+ | Screen Brightness Increase |
| Bright- | Backlight Decrease |
| Bright+ | Backlight Increase |
| Prvs | Previous |
| Play | Play/Pause |
| Next | Next |
| Mute | Mute |
| Vol- | Volume Decrease |
| Vol+ | Volume Increase |
| RGB Toggle | Turn Backlight on/off |
| RGBMd+ | RGB Mode Next |
| RGBMd- | RGB Mode Previous |
| Hue+ | Hue Increase |
| Hue- | Hue Decrease |
| RGB SPI | RGB Speed Increase |
| RGB SPD | RGB Speed Decrease |
| MO(1) | Layer 1 will be activated when holding this key |
| MO(3) | Layer 3 will be activated when holding this key |
Third party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of Windows/macOS, functionalities of third Party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.
Certain fn keys or multimedia keys does not work under Windows/Android mode.
Functionalities of certain multimedia keys may be disabled due to compatibility, versions, brands and drivers of Windows/Android OS.
Safety Precaution:
Keep the product, accessories and packaging parts out of reach of children to prevent any accidents and choking hazards.
Always keep the product dry to avoid corrosion.
Do not expose the product to extreme temperatures below -10°C (5°F) or above 50°C (131°F) to preserve the lifespan of the keyboard.
Keychron, Inc.
Dover, DE 19901, United States
Find us at:
https://www.keychron.com
Support@keychron.com
@keychron
@keychron
@keychronMK
Designed by Keychron
Made in China
Documents / Resources
 |
Keychron Q1 Wired Custom Mechanical Keyboard Knob Version [pdf] User Manual Q1 Wired Custom Mechanical Keyboard Knob Version, Q1, Wired Custom Mechanical Keyboard Knob Version, Custom Mechanical Keyboard Knob Version, Mechanical Keyboard Knob Version, Keyboard Knob Version, Knob Version, Version |
 |
Keychron Q1 Wired Custom Mechanical Keyboard Knob Version [pdf] User Guide Q1 Wired Custom Mechanical Keyboard Knob Version, Q1, Wired Custom Mechanical Keyboard Knob Version, Custom Mechanical Keyboard Knob Version, Mechanical Keyboard Knob Version, Keyboard Knob Version, Knob Version, Version |
