KETER SPLIT PREMIUM_02 Split Recycling System Instruction Manual

KETER SPLIT PREMIUM_02 Split Recycling System

Assembly parts

Keep this instruction manual with the product for future reference. Read the instructions carefully before assembly.

For optimum stability on uneven surfaces, regulate the cupboard using the screws under the front feet.

Fasten the cupboard to the wall (screws and anchors not included).

WARNINGS

The guarantee period begins on the date of delivery to the end consumer, within the terms and for the period established by law. To find out the warranty period and specific conditions applicable to your country of purchase, please contact the seller. In order to benefit from the guarantee, you must have kept the dated proof of purchase. Damage or malfunction caused by misuse, inappropriate use, use of force, negligence, or assembly not carried out in accordance with this instruction manual will void the warranty. Damages caused by incorrect storage of the product, or of the materials contained in the product, resulting in warping of the structure, invalidate the guarantee.
Warnings for use:

• The manufacturer is not responsible for damage caused by objects placed in the product.
• The product should be positioned on a flat surface.
• Not suitable for storing products subject to damage caused by variations in ambient temperature.
• Do not store hot objects in the product, such as welding lamps, irons, etc.
• Not suitable for storing flammable or corrosive substances.
• Not suitable for storing foods.
• Do not cut or perforate the product.
• You are recommended to close and lock the doors with a padlock (not included).
• A padlock can help prevent possible wind damage.
• Working temperature: from -5°C to +40°C.
• Wash the product with mild detergent to avoid damaging the plastic surfaces. Do not use stiff brushes or abrasive detergents.
• The product is not a toy. Keep out of reach of children.
• Important: danger of suffocation.
• Do not shut animals inside the product.
• After installation, dispose of the packaging in accordance with current legislation.
• At the end of its useful life, dispose of the product in accordance with current legislation.
• Keep the instructions

After assembly is completed there may be extra small parts, you may dispose of these as they are not needed.