Installation Instructions
Interface Adapter with
Cable for Extension BoxKERN KUP-13
Type TYKUP-13-A
Version 1.1
2023-06

TYKUP-13-A Interface Adapter with Cable for Extension Box

You will find the current version of these instructions also online under: https://www.kern-sohn.com/shop/de/DOWNLOADS/ Under the column Operating instructions

Scope of delivery

• Interface Adapter with Cable for Extension Box
• Installation Instructions

General information

Cable length: 0,15 m

• Via the KERN Extension Box up to 3 interfaces of your choice can be connected. However, these can only be used on their own and not at the same time. • Cascading is not possible! • Only KERN KUP adapters may be connected to the 15-pol-sub-D-plug of the device!

Installation

1. Switch off the appliance
2. Plug in the interface adapter at the KUP connection
3. Switch on the appliance. The interface adapter is automatically recognized by the appliance. However, it may take up to one minute before the interfaces can be used.

TYKUP-13-A-IA-e-2311
KERN & Sohn GmbH
Ziegelei 1
72336 Balingen-Frommern
Germany
+0049-[0]7433-9933-0
+0049-[0]7433-9933-149
info@kern-sohn.com

Documents / Resources

KERN TYKUP-13-A Interface Adapter with Cable for Extension Box [pdf] Instructions TYKUP-13-A Interface Adapter with Cable for Extension Box, TYKUP-13-A, Interface Adapter with Cable for Extension Box, Adapter with Cable for Extension Box, Cable for Extension Box, Extension Box, Box

References

• User Manual