KEPLUG Wake Up Light Dual Alarm Clock with FM Radio
Appearance
- Alarm Clock Button
- Down Button
- Lamp Button
- Up Button
- Snooze Button
- Volume +
- FM Radio
- Volume
- Fall-asleep
- Setting Button
Operation Guide
Features
- 12/24H Time Display
- Adjustable LED Time Display Brightness
- Sunrise Simulation
- Sunset Simulation
- 7 Colorful Atmosphere Light
- FM Radio 87.5-108MHz
- Dual Alarm Clocks
- 7 kinds of Ringing Sound
- 3 kinds of Sleeping Sound
- Snooze Function
- USB Electronic Device Charging Port
- AC Outlets Powered
- Button Battery
Instructions
Warning: This product includes a button battery that can be used as an emergency power source and has a memory function. No need to reset the alarm after power off. Remove the insulation sheet from the button battery when using for the first time.
Time Setting
In power-on state, have a long press on
for 2 seconds to enter time setting:
- Use
to set “hour”, press to confirm; - Useto set minute”, press to confirm;
- Use to choose 12/24H” press to confirm; finish setting.
LED Time Display Brightness
In power-on state, short press to adjust the brightness of LED display.
There are three brightness options.
The order of brightness changes is: High brightness -Medium brightness No brightness.
Alarm Clock Function
Alarm Clock Group
This product supports dual alarm clock mode. You can set two different al arm times. For example, set the Alarm clock 1 for weekdays and set Alarm clock 2 for weekends. When the weekend comes, you can turn off the Alarm clock 1 Their operation and setting are exactly the same (take Alarm 1 as an example in the instruction).
Turn ON/OFF Alarm Clock
In time state, press
to turn on alarm, and corresponding icon is displayed in time area. After turning on alarm, press to turn off alarm, and corresponding icon will disappear.
Alarm Clock Setting
In time state, have a long press on for 2 seconds to enter alarm setting.
- Use to set “Hour” , press to confirm.
- Use to set Minute”, press to confirm.
Alarm Ringtone Setting
Use to set ringtone, press to confirm. Option 1-7 is the wake-up ringtone.(There are bird singing, ocean sound, stream sound, beep, windbell, soft music and piano music.)
Option 8 is FM radio
You can use natural wake-up sounds or the FM radio to wake up to.
(Note: The channel that the FM radio wakes up depends on the channel you last listened to)
Alarm Volume Setting
Use to set Alarm Volume (Volume Range: V-01-V-16), and press to confirm. When the set alarm time arrives, the wake-up ringtone will gradually sound.
Wake Up Light Brightness Setting
Use to set brightness of wake-up lights (OFF, L-01-L-20), and press to confirm.
(Note: When the set alarm time arrives, the light will slowly turn from dark to the preset brightness level. OFF means turning off the light. Set the light state to OFF when you don’t need a light wake up.)
Simulated Sunrise Time Setting
Use to set advance time to lighten (10-60MIN), and press to confirm, finish setting. You can set the light to turn on 10-60 minutes before the alarm sounds. In the set sunrise simulation time the light intensity of the lamp gradually increases to the set level and the light color changes from deep morning red ta bright daylight.
Snooze Function
- When alarm clock goes off, press
to enter snooze state, you can get an extra 9 minutes of sleep time. (Note: snooze up to 5 times) - When alarm clock goes off (or snooze state), press the corresponding alarm clock button to turn off lights and sound.
- When alarm clock goes off, if there aren’ tany operations within 15 minutes, it will turn off lights and sound automatically.
Sleep Mode
In time state, press to turn on/off sleep mode.
Sleep Mode Setting
In time state, have a long press on for 2 seconds to enter sleep setting. Use to set “Sleep Time” (Optional setting time range is 10-120 minutes), press to confirm.
Lights Initial Brightness Setting
Use to set “Lights Initial Brightness” (OFF, L-01-L-20), press to confirm. (Note:Contrary to the sunrise mode, the light will gradually dim in sleep mode.OFF means turning off the light. Set the light state to off when you don’t need light-assisted sleep.)
Sleep Music Setting
Use to set “Sleep Music” (Natural Sound-1-3, FM-4), press to confirm. There are 3 kinds of ringtone can be selected.
There are: Rain, Forest and River sound.
(Note: The channel that the FM radio depends on the channel you last listened to.)
Volume Setting
Use to set “Initial Volume” (Range: V-01-L-16), press ” to confirm, finish setting. press the button again to turn off sleep mode.
(Note: When the sleep mode is turned off, the light does not turn off directly. Instead, it will slowly turn from bright white to deep red until it is completely closed.)
Lighting Function
Light Brightness Setting
In power-on state, press to turn on light; press to set the brightness, display the brightness (L01-L20); press again to turn off the light.
(Note: when turn on the light, the wake-up light will gradually change from dark red to bright white. When turning off the light, it is the opposite.)
Colorful Lights Setting
In power-on state, double press to turn on colorful lights, and enter the automatic color mode; In the automatic color mode, press to switch manual color mode; In the manual color mode, have a long press on to switch automatic color mode again. press again to turn off colorful lights.
FM Radio Function
Please have a long press on for 2 seconds to turn on automatic search mode in your first use, the radio will automatically save the frequency of P01, P02
Turn on Radio
In time state, press to turn on FM radio. Long press on for 2 seconds to set FM frequency. Short press the button to set radio volume.
Turn off Radio
In power-on state, press to turn off FM radio function. lf the signal is not good, you can solve it by changing the position and lengthening the antenna.
Caution
- Place the appliance on a stable, level and non-slippery surface.
- Do not use the appliance at room temperatures lower than 50° F/ 10° C or higher than 95° F/35° C.
- Do not use this appliance as a means to reduce your hours of sleep. The purpose of this appliance is to help you wake up more easily. It does not diminish your need for sleep.
- This appliance is only intended for household use, including similar use in hotels.
Storage
- Clean the appliance with a soft cloth.
- Do not use abrasive cleaning agents, pads or cleaning solvents like alcohol, acetone, etc., as this may damage the surface of the appliance.
- If the appliance will not be used for an extended period of time, remove the power cord from the wall outlet and store the appliance in a safe, dry location where it will not be crushed,banged, or subject to damage.
- Do not wrap the power cord around the appliance when storing it.
FAQs
Alarm clocks that simulate the dawn or morning light of the day combine a digital alarm with an artificial light source. Some are straightforward gadgets that, when activated on a timer, create a rapid burst of bright light, simulating the impression of waking up in the morning on a sunny day and immediately opening blinds or curtains.
Ten minutes after sunrise, the light will steadily increase in brightness from 10% to 100%. 10 minutes later, the alarm will go off at 6:30 AM. After pushing the snooze button, you can sleep for an additional 9 minutes (snooze up to 5 times). By pushing the alarm 1 button, you can stop the alarm.
A clock radio is a radio receiver and alarm clock combined into one gadget. To wake the user up at a specific time, the clock typically has a buzzer alarm and can also turn on the radio. Clock radios are frequently kept on nightstands.
It has been demonstrated that the use of timed light, such as that given off by a sunrise alarm clock, is an efficient, non-invasive method of enhancing mood, well-being, and the quality of sleep. According to research, the sleep-wake cycle can be reset by exposing oneself to light at the right time, enabling one to wake up when desired.
Sunrise alarms gently arouse you to wake you up rather than waking you up with a loud noise like a conventional alarm. The sunrise settings of the wake-up light invigorate your vision. Some wake-up lights can be accompanied by the sound of nature or the radio.
Three natural noises are already present in the Wake-up Light. Choose between a 12-hour and a 24-hour clock to set the time, and then change it. To turn the lamp on and use it as a bedside lamp, press the lamp on/off button. By pushing the + and – buttons, the light intensity can be changed.
Simply open the Google Clock app and search for the Bedtime Mode tab at the bottom to get started. Keep in mind that it can take some time for the feature to fully roll out to all Android phones. From here, you may choose when you usually like to wake up and when you usually want to go to bed, or at least start winding down.
You may evaluate how much sleep you’ll receive if you establish a bedtime and wake-up time. The Alarm tab will display the alarm that was set in the Bedtime tab. Activate the Clock app. Toss a bedtime.
The default alarm time on an Android device is 10 minutes. An Android alarm’s ring time can be adjusted, unlike the iPhone. In the alarm’s settings tab, you can modify the “silences after” setting.
A radio within a radio-controlled clock gets a signal from a location where an atomic clock is positioned. The signals that radio-controlled clocks in the US receive come from NIST Radio Station WWVB, which is situated close to Fort Collins, Colorado.
Sunrise alarms typically go off 30 to 60 minutes before your scheduled wake-up time, which, if you are light sensitive, may cause you to get up sooner than planned and cut short your sleep. According to McCall, this can have a bad effect.
Fish claims that rising with the light also enables your body to awaken gradually, naturally, as opposed to being abruptly jolted out of necessary REM sleep, or the deep sleep required by your brain to learn, retain memories, and control your emotions.
The most noticeable colour is blue. White light exposure during the day can have advantages, such as improving mood and attentiveness. The circadian clock is unaffected by red light, therefore you can use a soft red light at night.
Thank you for your question. There are three brightness settings for the time display: High, Low, and Off. So, yes, you can set it to total darkness.
Tap the snooze button to have the alarm go off again every nine minutes (up to 5 times). If you don’t snooze the alarm, it will go off after 15 minutes.
