KENWOOD DRV-A510W Dash Cam Manager App
Product Usage Instructions
Check for Firmware Updates:
- Open the KENWOOD DASH CAM MANAGER APP on your smartphone and navigate to the MKII DASHBOARD page.
- If a new firmware version is available, you will see “Updates Available” beneath your device name.
- Click on the ABOUT page to access the Firmware Update option.
Select Device and Initiate Update:
- Choose the device you wish to update and click on “Update the latest firmware.”
Download Firmware:
- Follow the on-screen instructions to download the latest firmware. Ensure your phone is connected to the internet.
Transmit Firmware to Device:
- Press the Download button to begin downloading the firmware. The phone will transmit it to the device using wireless link function.
Update Device:
- Press “Update” on your phone to start the update process on the device. Do not disconnect the device’s power during this time.
Update Completion:
- Once the update is complete, press “Complete” to return to the application Dashboard page.
FAQ
- Q: How long does the update process take?
- A: The update process usually takes approximately 1-2 minutes. Please ensure not to turn off the device during the update.
- Q: What should I do if the update fails?
- A: If the update fails, do not panic. Restart the process and ensure a stable internet connection for successful firmware update.
“`
Before Use
The screen images and operation examples in this document were created for explaining the operating procedures.
There may be screen images that differ from the actual screens or examples of operations not actually performed.
Disclaimer
Please note that JVCKENWOOD shall not be responsible for any damages suffered by the customer or a third party as a result of incorrectly using this product, a failure during use of this product, or other trouble, or due to the use of this product, unless such liability is acknowledged by law.
Copyrights
Recorded video, image, and audio content cannot be used for other than personal enjoyment without the consent of the copyright holder as specified in the Copyright Act.
Please note that the recording of an event such as a show, performance, or exhibition may be restricted even when doing so for personal enjoyment.
Precautions for Use
Precautions and notices
Warning! Do not operate the device while driving. Using this product does not change the requirement for a driver to take full responsibility for his or her behavior. This responsibility includes observing all traffic rules and regulations in order to avoid accidents, personal injury or property damage.
For your own safety, do not operate the controls of the product while driving.
A window mount is needed when using the device in a car. Make sure that you place the device in an appropriate place, so as not to obstruct the driver’s view or deployment of airbags.
Make sure that no object is blocking the camera lens and no reflective material is placed near the lens. Please keep the lens clean.
If the car’s windscreen is tinted with a coating, this may impact the recording quality.
Connect the charger to a proper power source. The voltage requirements are found on the product case and/or packaging.
Do not use the charger if the cord becomes damaged.
Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.
Risk of explosion if the battery is replaced by an incorrect type.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Do not ingest battery, Chemical Burn Hazard.
This product contains a button cell battery. If the button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Caring for your device
Taking good care of your device will ensure trouble-free operation and reduce the risk of damage.Keep your device away from excessive moisture and extreme temperatures.
Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time.
Do not place anything on top of your device or drop objects on your device.
Do not drop your device or subject it to severe shock.
Do not subject your device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage your device. In the event of moisture condensation, allow the device to dry out completely before use.
The screen surface can easily be scratched. Avoid touching it with sharp objects. Nonadhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches.
Never clean your device with the power on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device.
Do not use paper towels to clean the screen.
Never attempt to disassemble, repair or make any modifications to your device. Disassembly, modification or any attempt at repair could cause damage to your device and even bodily injury or property damage and will void any warranty.
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your device, its parts or accessories.
To discourage theft, do not leave the device and accessories in plain view in an unattended vehicle.
Overheating may damage the device.
Precautions for installation
Install the device in a position where it will not block the front view of the driver (position where hidden by the rear-view mirror).
Install the device so that it is within the wiping range of the wiper.
Install the device in a position where it will not interfere with the movement of the rear-view mirror.
Take care not to install the device over the vehicle inspection sticker or other sticker.
Take care not to install the device where it will interfere with driving or airbag operation.
When installing the device in a vehicle equipped with a driving support system, check the instruction manual of the vehicle and then select an installation position that will not interfere with the driving support system.
If the device is installed incorrectly, event recording or parked recording may not work correctly.
Refer to “Installation and Connection” for the loosening of fixing knob, installation orientation, installation angle, and other information and then install the device correctly.
Do not install the device near a digital terrestrial television antenna or an electrical component.
Doing so may reduce television receiver sensitivity or cause flickering and noise.
When selecting a position for the suction mount, make sure it’s on a glass surface that is smooth and free of paint.
Before mounting, clean the area with a dry/clean cloth and add a small amount of moisture to the windshield. This allows a stronger bond to form between the glass and the suction mount.
When fixing the device with the adhesive mount, use a commercially available cleaning cloth or the like to wipe off all dirt and grease on the mounting surface. If the device is re-affixed or mounted using, for example, general-purpose double-sided tape, the adhesion strength may weaken and cause the device to fall.
After mounting the device, leave it for 24 hours before use to enable the mounting strength of the adhesive mount to improve. Failing to do so may result in the adhesion of the adhesive mount becoming weak and the device falling.
Fix the cord in place with tape or the like so that it does not interfere with driving
Cleaning the device
When the device is dirty, wipe it with a dry silicone cloth or other soft cloth. If the device is very dirty, remove the dirt with a cloth with neutral cleaner on it then wipe off the cleaner. Wiping the device with a hard cloth or using a volatile substance such as thinner or alcohol may cause scratches, deformation, deterioration or other damage.
When the lens is dirty, gently wipe it with a soft cloth dampened with water. Rubbing the lens strongly with a dry cloth may cause scratches.
If you notice a problem with the device
If you notice a problem with the device, first refer to “Troubleshooting” (P. 75) and check whether there is a way to resolve the problem.
If the device does not return to normal after the reset, turn off the power of the device and then contact your dealer or nearest JVCKENWOOD service center.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed of as household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste by products.
Contact your local authority for details in locating a recycle facility nearest to you.
Proper recycling and waste disposal will help conserve resources while preventing detrimental effects on our health and the environment.
Accessories
Before you get started, check you have everything below.
Dashboard Camera
Adhesive Mount
Car Power Cable
USB Car Charger
Cable Clips
Static Side Film
Note
The provided Type-C car power cable in the package does not have data transfer functionality and is only for power supply purposes. If you wish to view videos, please remove the memory card and read it on a computer, or use the KENWOOD DASH CAM MANAGER APP on your mobile to view via wireless link, or use a third-party USB-A to USB-C cable with data transfer capabilities to connect and view on a computer. The device does not support Type-C USB cables with PD (Power Delivery) fast charging or USB-C to USB-C cables.
Product appearance may differ slightly to that shown above.
Key Features
2” LCD Color Screen
We developed a screen that perfectly fits your camera, without any loss of resolution.
This design allows you to use the playback feature, instantly letting you view the shot you just captured.
G sensor/File Protection
The dashboard camera’s built-in sensor detects an outside force, forcing the device to save what has been just recorded. The file can also be manually saved. By pressing our easy to access button around the screen, you are able to save an individual file.
Automatic Start/Stop Tech
The dashboard camera comes with built-in sensors that automatically turn the device on and off with the vehicle.
Built-In Microphone & Speaker
A built-in microphone and speaker come standard. The feature also works with the device’s playback feature.
GPS Data
Dashboard camera is able to record your location and speed while filming with the magnetic GPS mount.
Parking Mode
The dashboard camera has a parking mode, but a unique feature enables the device to automatically record 30 seconds of video if there is any physical movement of the vehicle. This feature requires hardwire kit CA-DR1031(optional accessory) to permanent power.
Full HD Rear Camera Recording (Optional)
DRV-A510W supports the rear camera recording. You can purchase the rear camera as a front and rear 2K+Full HD dual-camera recording. (sold separately, please see KENWOOD website for more detail).
Parts Name and Functions
The buttons of the KENWOOD dash cam will correspond to the functions currently represented by the displayed icons at the right side of the screen. Please follow the corresponding displayed icons to operate. The printed icons are more important and commonly used functions in the video mode, so the printed icons are as reference, but please use the icon displayed on the screen as a guideline.
Power Button / Mode / Screen Select
Press and hold the button for 3 seconds to turn the camera on/off.
Mode
In Video mode, press to navigate between Video and Playback mode when it is not recording.
Screen Select (Optional)
Press to switch the main camera to display on PIP screen.
When you have not installed a rear camera and only have a dashboard camera, no icon will be displayed here, and there will be no screen selecting functionality. The icon will only appear when connecting the rear camera while recording.
Note:
– PIP screen function is only available when connecting the rear camera. (sold separately)
Menu / Mute Button
Menu
Press this button to open the Video or Setup menu.
Mute
Press and hold the button for 2 seconds to turn on or off the audio recording function while in video mode.
Record / Screenshot Button
Record
In Video mode, press to start or stop recording.
Screenshot
Press and hold the button for 2 seconds to take a screenshot when recording.
File Protect / Wireless Link Button
File Protect
When recording, simply press the button and to protect the current video file from overwriting.
Wireless Link
In Video mode, press to start the wireless link when it is not recording.
Status LED Indicator
Red: Power On Red (Flashing): Recording Blue: Charging
Screen
The device is equipped with a standard 2” LCD color screen to let you view.
Parking Mode LED Indicator
Orange (Flashing): Parking Mode in Operation. The setting can be adjusted in the Video Menu.
Speaker
System sound and playback footage sound.
Bracket Slot
Slide the slots into the 3M bracket to complete the installation.
Microphone
Built-in microphone for audio recording.
Reset Button
On the rare occasions the camera has a problem, use the reset button to shut down the camera. Simply press the reset until the camera turn off and press power button to turn on. microSD Card Slot
Insert your microSD card here. Push your memory card into the slot until you hear a click.
DC-IN/Data transfer Port
By connecting DRV-A510W with the supplied car power cable, you are able to charge the camera.
Note: The provided Type-C car power cable in the package does not have data transfer functionality and is only for power supply purposes. If you wish to view videos, please remove the memory card and read it on a computer, or use the KENWOOD DASH CAM MANAGER APP on your mobile to view via wireless link, or use a third-party USB-A to USB-C cable with data transfer capabilities to connect and view on a computer. The device does not support Type-C USB cables with PD (Power Delivery) fast charging or USB-C to USB-C cables.
Rear Camera Port (Optional)
By connecting DRV-A510W rear camera, you are able to record a 2K+Full HD resolution video simultaneously for your rearview. (sold separately)
Installation and Connection
For the first installation, follow the instructions below:
Insert Your microSD Card Into The Device
The device is designed to allow a standard microSD card to record your footage. Before installing, make sure the gold end of the card is facing the LCD screen. Once it’s aligned with the slot, push the card in and listen for the CLICK that will confirm it is secure.
TIP:
If you cannot hear the CLICK, take a small coin by the edge and push on the outside end of the card until the sound is made.
Remember: DO NOT REMOVE OR INSERT THE MEMORY CARD WHILE THE DEVICE IS TURNED ON.
The device will power off automatically when you insert or remove the SD card.
CONNECTING TO CAR POWER OUTLET
Connect the USB car charger that is included in the package to your vehicle’s 12V outlet, and then connect the car power cable that is included in the package.
Note:
The KENWOOD dash cam does not support Type-C USB cables with PD (Power Delivery) fast charging or USB-C to USB-C cables. We recommend using the car power cable provided by us.
The KENWOOD dash cam requires a 2A current for normal operation, and the KENWOOD USB car charger provides a 2.6A output current. We recommend using the USB car charger provided by us.
Please do not use other USB ports in the car to connect the KENWOOD dash cam, as most car USB ports deliver less than 1A output, while the KENWOOD dash cam requires a 2A current for normal operation.
THE FIRST-TIME SETUP
When connecting the power, DRV-A510W will turn on and display the first-time setup guide below.\
TIP
You can reset the settings either by operating inside of the SETUP MENU, or by restoring defaults.
From now on, DRV-A510W will automatically turn on and start recording once power has been made available from the 12V outlet. Just start the vehicle and start driving!
If there is no 12V outlet or cigarette lighter for your vehicle, use the included
USB power cable but please notice that your USB power output port should provide 2A current to make sure the device work properly.
DO NOT wire DRV-A510W directly to the car cigarette outlet or any 12V outlet.
Doing so will result in permanent damage to the camera.
You can purchase our hardwire kit from the KENWOOD official website that will directly connect to your vehicle’s fuse box. This will allow you to have your 12V outlet available for other use. Please read carefully and follow the instructions below to help you operate DRV-A510W safely and refer to the official website for accessory instructions.
1. Position film location and clean windshield Before applying, clean windshield location, remove any dust, oil and use any cloth to give one last polish for best performance.
2. Remove the protective layer
Before sticking, pull out the actual film protector.
Pull out and remove the protective layer on one side.
3. Attach static side film to the windshield
Adhere the static side to the windshield, press out and remove excess bubbles using a squeegee or plastic card.
Make sure to press it fully to adhere on the windshield.
4. Install 3M adhesive mount
Mount 3M adhesive mount within the surface of the film and avoid the area that spans between windshield and film.
Firmware Update Instruction
OTA updates via the KENWOOD DASH CAM MANAGER APP on a smartphone 1. Open the KENWOOD DASH CAM MANAGER APP on your phone and navigate
to the MKII DASHBOARD page. When your phone detects a new firmware version, “Updates Available” will be displayed beneath your device name, and a yellow dot will appear next to ABOUT page indicating the presence of new firmware.
Dashboard
All Dash Cams (71) Default
DRV-A510W ba7 Updates Available
Dashboard
Downloads
About
2. Go to the ABOUT page, and you’ll see the “Firmware Update” option showing “Update the latest firmware” accompanied by a yellow dot. Click on it and select the device you wish to update.
APP SETTING Language
About
English
Unit
Imperial Unit
Date Format DASH CAM INFORMATION Model
MM/DD/YYYY DRV-A510W ba7
Firmware Ver.
Firmware Update
APP SETTING Language
About
English
Unit
Imperial Unit
Date Format DASH CAM INFORMATION Model
MM/DD/YYYY DRV-A510W ba7
Firmware Ver.
Firmware Update
Clear Downloads Cache
First Time Use Tutorial
Instruction Manual
Official WebsAitpeplication: V1.0.01
Private Policy Dashboard
Downloads
0.00 B Off
About
Clear DownlDoaRdVs -CAa5ch1e0W ba7
First Time Use Tutorial
Instruction Manual
Official WebsAitpeplication: V1.0.01
Private Policy Dashboard
Downloads
0.00 B Off
About
3. After clicking, you’ll be directed to the FIRMWARE UPDATE page. Follow the on-screen instructions to download the latest Firmware and confirm the update.
Firmware Update
Firmware Update
Firmware Download
Please press the “Download” button below to download the latest firmware version. Before downloading, please ensure that your phone is connected to the internet and do not disconnect
the device’s power.
Downloading…
46%
Please wait
Download
Next
4. At this point, the phone will transmit the downloaded firmware to the device using the wireless link function.
Firmware Update
Firmware Update
Downloading…
46%
Downloading…
100%
Please wait
Please press the “Next” button below for the next step. The firmware will be transmitted to the device through the
Wireless Link function. It will take approximately 1-2 minutes to transmit the firmware, and please DO NOT turn
off the device during transmission.
Next
Next
5. Once the transfer is complete, press “Update” on your phone, and the device will begin the update process. Please do not disconnect the device’s power during this time. The update will take approximately 1-2 minutes.
Firmware Update
Firmware Update
Transferring completed!
100%
Please press the “Update” button below to update the device. After pressing the button, the connection
will be disconnected, and the device begin the update process. It will take approximately 1-2 minutes to complete. DO NOT turn off the device during the update. After the update is complete, the device will
automatically restart.
Update
The device has started updating.
The update will take approximately 1-2 minutes to complete. DO NOT turn off the device during the update. After the
update is complete, the device will automatically restart. Please press the “Complete” button to return to the
application Dashboard page.
Done
6. When the update starts, there will be a popup message as picture below. DO NOT TURN OFF OR PRESS ANY BUTTON DURING THIS PERIOD, IT MAY CAUSE THE UPDATE FAILURE.
Firmware updating… Do not disconnect power!
7. It may take a while for updating. Once it finishes the update, Dash Cam will turn off the device automatically.
8. Once it finishes the update, you can turn on the device and check the ABOUT page of the KENWOOD DASH CAM MANAGER APP. If the “Firmware Update” shows “Your firmware is up to date,” the update was successful.
Documents / Resources
 |
KENWOOD DRV-A510W Dash Cam Manager App [pdf] Instructions DRV-A510W, ba7, DRV-A510W Dash Cam Manager App, DRV-A510W, Dash Cam Manager App, Cam Manager App, Manager App, App |
 |
KENWOOD DRV-A510W Dash Cam Manager App [pdf] Instructions DRV-A510W, ba7, DRV-A510W Dash Cam Manager App, DRV-A510W, Dash Cam Manager App, Cam Manager App, Manager App, App |