KEMIMOTO UTV Soft Window Panel Installation Guide

KEMIMOTO-logo

KEMIMOTO UTV Soft Window Panel

KEMIMOTO-UTV-Soft-Window-Panel-product

Specifications

  • Product Type: UTV Soft Rear Window / Soft Window Panel
  • Material: Heavy-duty Oxford fabric with transparent PVC window
  • Weather Resistance: Water-resistant, windproof, dustproof
  • Window Style: Roll-up or zippered ventilation window
  • Installation: Tool-free strap or hook-and-loop mounting
  • Compatibility: Various Polaris, Kawasaki, Honda, and Can-Am UTV models
  • Features:
    • Reduces dust, mud, snow, and cold air entry
    • Clear rear visibility through the PVC panel
    • Tear-resistant fabric construction
    • Lightweight and foldable design
    • Some models include reflective strips and storage pockets
  • Use: Off-road riding, trail protection, winter riding comfort
  • Maintenance: Wipe clean with mild soap and water; avoid harsh chemicals and prolonged folding of PVC window sections

Usage Instructions

Installation Process

  1. Positioning and Pre-Installation
    • Lay the soft window/door panel flat on the ground
    • Compare the roll cage and door frame of the vehicle, roughly compare their positions, and mark the fixing points of the Velcro and straps.
  2. Fixed Velcro/Self-adhesive Strip
    • Clean the corresponding positions of the roll cage and door frame with alcohol and let them dry.
    • Peel off the Velcro backing, stick it tightly at the marked position, and press for 30 seconds to ensure firmness.
    • If the kit includes self-adhesive fixing strips, they should also be cleaned and attached to the roll cage.
  3. Install the Main Body of the Soft Window/Door Panel
    • One person holds the soft window steady, while the other aligns its edge with the Velcro and presses down from the top to secure it.
    • Use the accompanying straps or plastic buckles to secure the fixing points on the soft window to the roll cage one by one, ensuring a tight fit.
    • Adjust the position of the transparent window to ensure clear visibility and no wrinkles.
  4. Fix the Bottom and Sides
    • Align the bottom edge of the soft window with the door frame or lower half door panel, and secure it with a snap fastener or Velcro.
    • Check all fixing points to ensure they are not loose, the edges are not raised, and prevent air and dust leakage during driving.
  5. Functional Testing
    • Test whether the transparent window can be smoothly rolled up and fixed.
    • Close the car door and check the fit between the soft window and the car door to ensure no interference.
    • Gently pull the soft window and confirm that all fixing points are secure.

NOTICE BEFORE INSTALLATION

  1. For optimal performance, the Soft window Panel is designed to be used in conjunction with the vehicle roof and front/rear windshields to create a relatively sealed and warm environment. It is not advisable to use this product in an open setting, as strong winds could potentially cause damage to the straps, hook-and-loop tapes, and body decals.
  2. For an easy action, loosen the fixation clamps of your vehicle’s roof, front/rear windshields, before starting installation.
  3. Use denatured alcohol and clean any area where the product will be installed.
  4. Should you notice whiteness, cloudiness, wrinkles, or ripples on the Soft Panel, be aware that these imperfections usually resolve after
    exposure to sunlight and/or heat. To expedite this process, gently warm the affected areas using a heat gun or hair dryer. Caution: Do not overheat, and avoid concentrating heat on one area for too long to prevent damage to the Soft Panel.

By following these precautions before installation to ensure a successful setup and maintain the integrity of the UTV Soft Panel.

ABOUT CLEAN AND CARE

  1. When cleaning the Soft Panel, use only soap and water. Do not use detergents, window cleaners, or solvents as they may damage the material.
  2. Do not clean the transparency window with a dry cloth or rag to avoid scratching.
  3. Routinely clean and lubricate the zipper:
    • Clean the zipper with a toothbrush using soap and water. After drying, lubricate the teeth with zipper lubricant, or alternatively, you can use soap or candle wax.
    • If the zipper sticks, do not force it. Remove any debris from the teeth and reapply lubricant. Ensure that the zipper moves smoothly before
      trying to open or close it further.
  4. The self-adhesive tape is very sticky and could damage the body decals if removed hastily. If you need to remove the self-adhesive tape, we recommend doing so slowly and carefully. Press down on the body decal or panel with one hand while gently peeling away the tape with the other hand.
  5. Do not fold the Soft Panel for storage. If your model has zippered windows, ensure they are closed before rolling up the panel for storage.
  6. Do not tow the vehicle at highway speeds with this product installed. Please follow these cleaning and care instructions to ensure the longevity and performance of the UTV Soft Panel.

Troubleshooting

  • Problem: Loose fit or air/dust leakage.
    • Solution: Recheck all fixing points (Velcro, straps, snap fasteners). Ensure they are securely fastened and that edges are not raised. Adjust as necessary.
  • Problem: Wrinkles in the transparent window.
    • Solution: During installation, carefully adjust the position of the transparent window to ensure clear visibility and no wrinkles before fully securing.
  • Problem: The transparent window is not rolling up smoothly.
    • Solution: Ensure there are no obstructions. If zippered, ensure zippers are clean and lubricated if necessary.
  • Problem: Interference with the car door.
    • Solution: After installation, close the car door and check the fit. If there’s interference, slightly adjust the soft window’s position or tension.

Documents / Resources

PDF thumbnailUTV Soft Window Panel
Installation Guide · UTV Soft Window Panel, UTV, Soft Window Panel, Window Panel

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.