Kedu RXFL-KD002 Dimming Plus Variable Frequency Fan Light Remote Control
Specifications
- Product Name: Dimming + Variable Frequency Fan Light Remote Control
- Functionality: Dimming control and variable frequency fan control
- Key Features: Code matching, code clearing
Product Overview
Code Matching
- Ensure the power is on.
- Press and hold the Code Matching key within 3 seconds until the light flashes twice.
- Release the key. The code matching is completed.
Code Clearing Step
- Ensure the power is on.
- Press and hold the All Off key within 3 seconds until the light flashes twice.
- Release the key. The code is cleared successfully.
If you need to use the remote control again, repeat the code-matching steps.
Match code
Code matching: When the power is on, press and hold the “Code matching” key within 3 seconds until the light flashes twice, then the code matching is completed.
Code clearing step: When the power is on, press and hold the “All Off” key within 3 seconds until the light flashes twice; then the code is cleared successfully. If it is used again, follow the code-matching steps once.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. The device can be used in portable exposure conditions without restriction.
FAQs
Q: What should I do if the code matching is not successful?
A: If the code matching is not successful, ensure that you are following the correct steps and try again. Make sure the remote control has fresh batteries.
Q: How often do I need to clear the code on the remote control?
A: You only need to clear the code if you encounter issues with the remote control or if you want to reprogram it for a different device.
Documents / Resources
 |
Kedu RXFL-KD002 Dimming Plus Variable Frequency Fan Light Remote Control [pdf] Instruction Manual RXFL-KD002, RXFL-KD002 Dimming Plus Variable Frequency Fan Light Remote Control, Dimming Plus Variable Frequency Fan Light Remote Control, Variable Frequency Fan Light Remote Control, Frequency Fan Light Remote Control, Fan Light Remote Control, Remote Control |