KARPENTER DINING TABLE Instruction Manual

KARPENTER DINING TABLE Instruction Manual

ASSEMBLING INSTRUCTION

Pre Assembly :

• Please read all instructions before beginning assembly
• Place all parts on a carpet or foam in shipping box. Find the round sticker with letter (A,B,C,…) .on each part and check with below part list to ensure we have all components.
• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts .or hardware.
• This cart requires one people to do assembly.

Parts Included :

1. Top Table – 1 pc
   
2. Legs – 4 pcs
   

   Hardware Enclosed:

3. Hexagonal Bolts – 8 pcs
   
4. Wrench – 1 pc
   

Assembly Instructions :

1. Lay Top Table (A) onto clean smooth surface as carpet or cardboard.
   Please note the indicating stickers or letter for homing guidance.
2. Attach Leg (B) to the Top Table (A) by aligning into wooden corner holes, and secured by Hexagonal Bolts (C). Tighten by using Wrench (D).
3. Turn up the Dining Table. Assembly is complete.
   
   
   

Care Instructions :

• Hardware may loosen over time. Periodically check to make sure all components are tight. .Re-tighten if necessary.
• Dust with soft dry cloth.
• Avoid abrasive cleaners. If a cleaner is needed, use a mild-cleaner spray and blot with .an absorbent cloth.
• For indoor use only.