Weld Alumastar 1-Piece Wheel Instruction Manual

1. პროდუქტი დასრულდაview

The Weld Alumastar 2.0 one-piece wheel is engineered for high-performance applications, notably in Pro Mod and Pro Stock racing. Its iconic five-spoke design features a one-piece forged construction, which contributes to a lighter, stronger wheel with minimal run-out, enhancing vehicle performance and handling.

Image 1.1: The Weld Alumastar 1-Piece Black Wheel. This image displays the wheel's five-spoke design, black finish, and polished accents on the spokes and rim edge. The "WELD RACING FORGED U.S.A." inscription is visible around the rim.

2. რა არის ყუთში

Your Weld Alumastar wheel package includes the following components:

• Forged Wheel (Quantity as ordered)

Note: Lug nuts, valve stems, and center caps are typically sold separately and are not included unless specified by your retailer.

3. ძირითადი მახასიათებლები

• Forged 6061 Monoblock Construction: Provides superior strength and durability while reducing unsprung weight.
• Optimized for Weight Reduction: Engineered design minimizes mass for improved acceleration and braking.
• Black Anodized or Polished Finish: Offers a durable and aesthetically pleasing გარეგნობა.

4. დაყენება და ინსტალაცია

Proper installation is crucial for safety and performance. It is highly recommended that wheel installation be performed by a qualified professional technician.

1. ინსპექტირება: Before installation, carefully inspect each wheel for any signs of damage from shipping. Verify that the wheel specifications (diameter, width, bolt pattern, backspacing) match your vehicle's requirements.
2. საბურავის მონტაჟი: Mount tires according to tire manufacturer guidelines. Ensure proper bead seating and balancing. Use appropriate tire mounting equipment to avoid damaging the wheel finish.
3. მანქანის მომზადება: Ensure the vehicle's hub mounting surface is clean and free of rust, dirt, or debris.
4. ბორბლის დაყენება:
   • Carefully place the wheel onto the vehicle's hub.
   • Install lug nuts by hand to prevent cross-threading.
   • Tighten lug nuts in a star pattern using a torque wrench to the vehicle manufacturer's specified torque settings. Do not use impact wrenches for final tightening.
5. ხელახალი ბრუნვა: After driving approximately 50-100 miles, re-torque all lug nuts to ensure they remain properly seated.

WARNING: Incorrect installation or improper torque can lead to wheel detachment, serious injury, or death. Always follow vehicle manufacturer's specifications for lug nut torque.

5. ექსპლუატაცია და გამოყენება

Weld Alumastar wheels are designed for performance. Adhere to the following guidelines for optimal use:

• საბურავის წნევა: Maintain correct tire pressure as recommended by your vehicle and tire manufacturers. Check tire pressure regularly.
• მართვის პირობები: While durable, these wheels are primarily designed for performance applications. Avoid severe impacts with potholes or curbs, which can damage the wheel.
• დატვირთვის მოცულობა: Do not exceed the maximum load capacity specified for the wheel and tire combination.

6. მოვლა

Regular maintenance will preserve the appearance and integrity of your Weld Alumastar wheels.

• დასუფთავება: Clean wheels regularly with mild soap and water. Avoid abrasive cleaners, harsh chemicals, or stiff brushes, which can damage the finish. For anodized finishes, use products specifically designed for anodized aluminum.
• ინსპექტირება: Periodically inspect wheels for any signs of damage, cracks, bends, or corrosion. If damage is found, have the wheel inspected by a professional immediately.
• შენახვა: If storing wheels for an extended period, clean them thoroughly and store them in a cool, dry place away from direct sunlight and harsh chemicals.

7. Დიაგნოსტიკა

If you experience issues with your wheels, consider the following common troubleshooting steps:

• ვიბრაცია: If you experience vibration, check tire balance, lug nut torque, and ensure no debris is lodged between the wheel and hub. A bent wheel or damaged tire can also cause vibration.
• Air Loss: Check for proper tire bead seating, valve stem integrity, and any punctures in the tire. A cracked wheel can also cause air loss.
• არაჩვეულებრივი ხმაური: Investigate any unusual noises coming from the wheel area. This could indicate loose lug nuts, worn bearings, or brake issues.

For persistent issues, consult a professional automotive technician.

8. სპეციფიკაციები

9. უსაფრთხოების ინფორმაცია

წინადადება 65 გაფრთხილება:

ეს პროდუქტი შეიძლება შეიცავდეს ქიმიკატებს, რომლებიც კალიფორნიის შტატის მიერ ცნობილია, როგორც კიბოს და თანდაყოლილი დეფექტების ან სხვა რეპროდუქციული ზიანის გამომწვევი. დამატებითი ინფორმაციისთვის ეწვიეთ www.P65Warnings.ca.gov.

Always wear appropriate personal protective equipment (PPE) when handling or installing wheels and tires.

10. გარანტია და მხარდაჭერა

For specific warranty details regarding your Weld Alumastar wheels, please refer to the warranty documentation provided with your purchase or visit the official Weld Racing webადგილზე. გარანტიის პირობები, როგორც წესი, ფარავს წარმოების დეფექტებს გარკვეული პერიოდის განმავლობაში.

For technical support, installation assistance, or to inquire about replacement parts, please contact Weld Racing customer service directly. Contact information can usually be found on their official webსაიტზე ან თქვენი უფლებამოსილი დილერის მეშვეობით.

გთხოვთ, შეინახოთ თქვენი შეძენის მტკიცებულება გარანტიის პრეტენზიებისთვის.