Samson SP01 Spider Mount Instruction Manual

1. შესავალი

The Samson SP01 Spider Mount is a high-quality shock mount designed to enhance audio recording by isolating microphones from unwanted vibrations. This manual provides essential information for the proper setup, operation, and maintenance of your SP01 Spider Mount.

2. ძირითადი მახასიათებლები

• ვიბრაციის იზოლაცია: Designed to isolate the microphone from physical vibrations, floor noise, and stand noise, contributing to clearer audio recordings.
• ძლიერი კონსტრუქცია: Constructed from metal for durability and reliable support.
• სპეციფიკური თავსებადობა: Engineered for seamless integration with designated Samson condenser microphones.

3. Compatible Microphones

The Samson SP01 Spider Mount is compatible with the following Samson condenser microphones:

• სამსონ C01
• სამსონ C03
• Samson CL7
• Samson CL8
• სამსონი C01U

For optimal performance, ensure your microphone model is listed above.

4. დაყენება და ინსტალაცია

Follow these steps to properly attach your Samson SP01 Spider Mount to a microphone stand and install your compatible microphone.

4.1 Attaching to a Microphone Stand

1. Identify the threaded adapter on your microphone stand. The SP01 mount typically uses a standard thread size.
2. Screw the base of the SP01 Spider Mount onto the microphone stand until it is securely fastened. Ensure it is tight enough to prevent wobbling but do not overtighten.

Image: The Samson SP01 Spider Mount shown attached to a microphone stand, illustrating its typical setup.

4.2 მიკროფონის დაყენება

1. Gently open the spring-loaded clamps of the Spider Mount.
2. Carefully insert your compatible Samson condenser microphone into the mount, ensuring it is centered and held firmly by the elastic bands.
3. გაათავისუფლეთ clamps, allowing the elastic bands to securely cradle the microphone. The elastic suspension system is crucial for isolating vibrations.

სურათი: ახლო ხედი view of a microphone being carefully placed into the elastic suspension of the Samson SP01 Spider Mount.

5. ოპერაცია და რეგულირება

The Samson SP01 Spider Mount allows for flexible positioning of your microphone.

• კუთხის რეგულირება: Use the knob on the side of the mount to loosen, adjust the microphone to your desired angle, and then tighten to secure its position.
• ვიბრაციის შემცირება: The primary function of the Spider Mount is to reduce unwanted vibrations transmitted through the microphone stand. Ensure the elastic bands are intact and properly tensioned for effective isolation.

6. მოვლა

To ensure the longevity and optimal performance of your Samson SP01 Spider Mount, follow these maintenance guidelines:

• დასუფთავება: Wipe the metal frame with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• ელასტიური ზოლები: Periodically inspect the elastic bands for signs of wear, stretching, or breakage. Worn bands may reduce the mount's effectiveness in isolating vibrations. Replacement bands can be sourced from authorized Samson dealers.
• შენახვა: When not in use, store the mount in a clean, dry environment to prevent damage.

7. Დიაგნოსტიკა

If you experience issues with your Samson SP01 Spider Mount, consider the following:

• Excessive Vibration Noise:
  • Ensure the microphone is correctly seated within the elastic bands.
  • Check if the elastic bands are worn or broken and replace them if necessary.
  • Verify that the mount is securely tightened to the microphone stand.
• Microphone Slipping:
  • Confirm that your microphone is one of the compatible models.
  • Ensure the elastic bands are providing adequate tension.

8. სპეციფიკაციები

9. გარანტია და მხარდაჭერა

For warranty information and technical support, please refer to the official Samson Technologies webსაიტზე ან დაუკავშირდით მათ მომხმარებელთა მომსახურების სამსახურს. შეინახეთ შეძენის დამადასტურებელი საბუთი გარანტიის ნებისმიერი მოთხოვნისთვის.

დამატებითი რესურსებისა და პროდუქტის შესახებ ინფორმაციისთვის ეწვიეთ SAMSON Store on Amazon.