K and J CUSTOM DOG CRATES IATA Compliant Door Chew Guard for Crates
Included in Kit
- Front Door Guard
- Back Door Guard
- Thumb Screws (5 pieces)
Installation Instructions
Please install the door guard as shown in the diagram below:
Diagram Description
The diagram illustrates the installation process for the door guard.It includes the following components:
The diagram illustrates the installation process for the door guard.It includes the following components:
- Front Door Guard: Positioned at the front of the door.
- Back Door Guard: Positioned at the back of the door.
- Thumb Screws: Used to secure the guards in place. Ensure all screws are tightened properly.
Specifications
| Component | Description |
|---|---|
| Front Door Guard | Perforated metal panel designed to protect the front of the door. |
| Back Door Guard | Perforated metal panel designed to protect the back of the door. |
| Thumb Screws | Set of 5 screws used to attach the guards securely. |
Included in Kit
Please Install the door guard as the picture shown
FAQ
- How do I know if the guards are installed correctly?
Ensure that both the front and back guards are aligned properly with the door and all thumb screws are tightened securely. - Can I use other screws if I lose the thumb screws?
It is recommended to use the provided thumb screws to ensure proper fit and security. - What tools are needed for installation?
No additional tools are required; the thumb screws can be tightened by hand.
Documents / Resources
 |
K and J CUSTOM DOG CRATES IATA Compliant Door Chew Guard for Crates [pdf] Instruction Manual IATA Compliant Door Chew Guard for Crates, IATA, Compliant Door Chew Guard for Crates, Door Chew Guard for Crates, Chew Guard for Crates |
