Notes
The Company reserves the right to modify the contents of the manual without prior notice. Functions may vary in some software versions.
- Before use, charge the product for at least 2 hours with the included cable.
- Connect with the mobile app to synchronize time and set personal information.
- The product is IP68 waterproof. Avoid deep sea diving, hot water, tea, or corrosive liquids, as these can cause damage not covered by warranty.
01 How to wear
For daily use, wear the watch about one finger's distance from your wrist bone, with the strap comfortably tightened. Note: Excessively loose wear may affect heart rate sensor data capture.
[Diagram description: Two illustrations show correct and incorrect watch placement on the wrist. The correct placement shows the watch snug but not tight, with a checkmark ✔️. The incorrect placement shows the watch too loose, with a cross mark ❌.]
02 How to download & connect to APP
02.1 Download and Install:
Power on the watch by pressing and holding the side button. Slide down the watch home page to access Settings ⚙️, then go to 'APP Download' > 'Download QR Code'. Scan this QR code with your mobile phone to download and install the "Imilab Fit" APP. Alternatively, scan the QR code provided below the text to download from your mobile app market.
[Image description: Shows a smartwatch screen displaying the 'Imilab Fit' app icon and a QR code. Another image shows the watch face with time and date.]
02.2 Connect to APP:
Open the "Imilab Fit" App, select "Add Device" on the Devices page, and follow the on-screen instructions.
02.3 How to make Bluetooth ? calls
Android Mobile: Once the app is bound and data synchronized, the watch will prompt to pair with IMISW13 (ID-xxxx). Pairing can then be done directly.
iOS Mobile (iOS 13+): Supports one-key connection. After successful app binding and data synchronization, the watch will prompt if IMISW13 (ID-xxxx) would like to pair with your iPhone ?. Pairing can be done directly.
For some iOS and Android phones: If the Phone ? function is needed after app binding, manually go to your phone's Settings ⚙️ > Bluetooth ?, search for audio Bluetooth IMISW13 (ID-xxxx), and pair. The Phone ? function will only work after successful audio Bluetooth pairing.
[Image description: Shows a Bluetooth settings screen on a phone displaying a device named 'IMISW13(ID-C5C6)' as available to pair.]
Tips:
- Upgrade the app to the latest version for a better experience.
- Android 5.0 and iOS 9.0 or above systems are compatible with the App.
- For first-time iPhone connection, a "Pair" prompt will appear. Click to pair for incoming calls ? and messages ?.
- For first-time Android connection, a "Permissions" prompt will appear. Follow guidance to allow necessary permissions for full functionality.
- Ensure mobile phone's Bluetooth ?, GPS, and network are enabled for successful connection.
- If the device is not found or disconnects, try resetting or turning the watch off and on again.
03 Operating Instructions
a. Control panel: Slide the Home screen from top to bottom.
[Image description: Watch face showing icons for quick settings like brightness, battery, etc.]
b. Message ?: Slide the Home screen from bottom to top.
[Image description: Watch face showing a notification message.]
c. Main Menu Page: Slide right from the main page. Menu styles can be changed by double-clicking the upper button or via the setting page ⚙️.
[Image description: Watch face showing different app icons arranged in a grid.]
d. Open shortcut interface: Slide the Home screen from right to left.
[Image description: Watch face showing quick access to features like step count ?, distance, calories.]
e. Switch watch face: Rotate the digital crown on the Home screen.
[Image description: Watch face displaying the time and date.]
f. Power on/off: Press and hold the digital crown button for 3 seconds.
g. During normal operation: Press the digital crown to return to the previous interface. On the watch face screen, press the digital crown again to turn the screen on or off.
[Diagram description: Shows the watch with labels pointing to the 'Crown' and 'Button'.]
h. Rotary crown function: Scroll lists up/down by rotating the crown. Scroll the Home screen left/right by rotating the crown.
i. Sports List ?: Press the down button to enter the sports list.
04 Function introduction
Sport modes ?: Supports 100 sports modes including outdoor running, cycling, badminton, table tennis, tennis, hiking, walking, basketball, soccer, baseball, volleyball, cricket, rugby, field hockey, dancing, indoor cycling, sit-ups, treadmill, gymnastics, rowing, jumping jacks, freestyle training, outdoor walking, and indoor running.
[Image description: A circular menu showing icons for various sports modes like 'Outdoor Run', 'Indoor Run', 'Walking', 'Mountaineer'.]
Status ?: Records daily steps, distance, and calories. Detailed analysis and data records are available in the app.
[Image description: Watch screen showing step count (20456), distance (4037), and calories (10.27).]
Bluetooth ? Calling ?: Make calls on the watch when connected to your phone via Bluetooth. View call history and sync contacts from the app. Switch Bluetooth call function on/off.
[Image description: Watch screen showing options like 'Keypad', 'Call logs', 'Contacts', 'Switch'.]
Heart rate monitor ❤️: Measures current heart rate. Records and displays heart rate for 24 hours, monitoring every 10 minutes. Detailed analysis available in the app. (Values are for reference only, not a medical basis.)
[Image description: Watch screen showing heart rate (127 bpm) with graph and historical data points.]
Sleep ?: Records and displays total sleeping hours, deep sleep, and light sleep from the previous night. Detailed analysis available in the app.
[Image description: Watch screen showing sleep duration (08h 34m) with breakdown of deep and light sleep.]
Blood oxygen ?: Tests current blood oxygen value, monitoring throughout the day. Detailed analysis available in the app. (Values are for reference only, not a medical basis.)
[Image description: Watch screen showing blood oxygen level (98%).]
SOS ?: Add contacts for "SOS call" via the app.
[Image description: Watch screen showing icons for 'Training', 'Status', 'SOS', 'Phone'.]
Weather ☁️: Displays current weather conditions and forecasts for the next 3 days. Weather information updates when connected to the app. If disconnected for a long time, updates may not occur.
[Image description: Watch screen showing current temperature (27°C), condition, and daily forecasts.]
Music control ?: Control music playback (play/pause/previous/next song) and volume from the watch when connected to a mobile phone.
[Image description: Watch screen showing music player controls with play/pause, next, previous buttons.]
Notifications ?: Receive message reminders and sync notifications from your phone, storing up to 8 latest messages.
[Image description: Watch screen showing notification messages.]
Alarm ⏰: Set up to 8 alarm reminders. The watch will vibrate and the screen will light up.
[Image description: Watch screen showing alarm settings with time (08:30) and an add button.]
Pressure ?️: Measures current pressure, recording and displaying values 24 hours a day. Detailed analysis available in the app. (Values are for reference only, not a medical basis.)
[Image description: Watch screen showing pressure readings.]
Mood ?: Tests current mood. Detailed analysis available in the app. (Values are for reference only, not a medical basis.)
[Image description: Watch screen showing 'Positive' mood status.]
Respiratory rate ?️: Measures current respiratory rate. (Values are for reference only, not a medical basis.)
[Image description: Watch screen showing respiratory rate (20 bpm).]
Breathing training ?: Set breathing rhythm and time, and follow prompts for training.
[Image description: Watch screen showing breathing exercise interface with 'Breathe' and 'Click to start' options.]
Games ?: Bird game available.
[Image description: Watch screen showing 'Bird game' icon.]
Voice assistant ?️: Double-click the down button to enter the voice assistant. Double-click the voice assistant to wake up the phone ? function. Requires Bluetooth ? connection to the mobile phone.
[Image description: Watch screen showing 'Please click the screen to speak' prompt for voice assistant.]
Other functions ⚙️: Stopwatch ⏱️, Flashlight ?, Timer ⏳, Find phone ?.
[Image description: Watch screen showing icons for 'Stopwatch', 'Timer', 'Find phone', 'Flashlight'.]
Sound setting ?: Control entertainment sound (music ?, videos, etc.) and ringtone volume for incoming calls ?. The main control is for third-party playback sound. Control whether the watch sound is on or off.
[Image description: Watch screen showing sound settings like 'Sounds', 'Ringtone Volume', 'Phone Audio', 'Ring Tone'.]
Always-on Display ?️: When enabled, the watch always shows a clock when not in use. Note: This increases power consumption.
[Image description: Watch screen showing 'Always-on Display' settings with 'Switch' and 'Always-on Display style' options.]
Settings ⚙️: Access Watch face, Theme, Always-On Display ?️, Brightness, Screen Time, Sounds ?, Info, Off, Reset, QR Code ?, and Password settings.
[Image description: Watch screen showing main settings menu with options like 'Watch face', 'Theme', 'Brightness', etc.]
05 Other functions
Includes sedentary reminder, do not disturb mode, low battery reminder, incoming call reminder ?, shake to take photo ?, find watch ?, online/custom watch faces, 12/24 hour time format, unit settings, raise-to-wake gesture, physiological cycle reminder, and goal reminder.
06 Charge the battery ?
- Place the watch on the charging head, ensuring the charging contacts on the watch back align with the metal contacts on the charging head.
- Connect the charging cable to a standard USB charger (5V output, 0.5A or higher).
If the watch does not turn on after a long period of inactivity, clean the charging contact plate on the cable to remove sweat or moisture residue before charging again.
07 Warranty
- Quality issues due to manufacturing, material, or design during normal use: Motherboard has a one-year warranty; battery ? and charging cable have a six-month warranty from the purchase date.
- No warranty for malfunctions caused by user's personal reasons, including:
- Unauthorized disassembly or modification.
- Inadvertent dropping during use.
- Man-made damage, third-party fault, or misuse (e.g., water ingress, external cracks, scratches, damage to peripheral components).
- For warranty repair/maintenance, provide the warranty card with the purchase date and store stamp.
- Product repair service should be sought from the company or its distribution points.
- All product features are subject to the actual product.
Specifications
| Model | IMISW13 |
|---|---|
| Battery Capacity | 300mAh |
| Battery Type | Li-ion |
| Charging Voltage | 5 V |
| Water & Dust Proof | IP68 |
| Working Temperature | -20°C ~ 45°C |
| FCC ID | 2APA9-IMISW13 |
FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
