UGREEN CM430 DisplayPort Bi-directional Switch
Product Overview
Thank you for purchasing UGREEN products. For optimum operation, please read this manual carefully before using.
Package Contents
- DP Bi-directional Switch ×1
- USB-C Power Cable (1 meter) ×1
- User Manual ×1
- Product Warranty Card ×1
Product Description
The UGREEN DisplayPort Bi-directional Switch allows for flexible signal routing between DisplayPort sources and displays. It features a switch button ⚙️ to select between input sources or output displays, and signal indicator lights to show the active connection. The device supports up to 4K@60Hz resolution.
Key Ports:
- DP IN 1
- DP IN 2
- DP OUT
- USB-C DC5V Power Port
Operating Modes
2-In 1-Out Mode
Connect two signal sources (e.g., computers) to the switch's DP IN 1 and DP IN 2 ports. Connect the switch's DP OUT port to a single display. Use the switch button ⚙️ to select which signal source's content is displayed. Indicator light 1 or 2 will illuminate blue.
Diagram Description: The diagram illustrates two signal sources connected via DP cables to the switch's 'DP IN 1' and 'DP IN 2' ports. The switch's 'DP OUT' port is connected via a DP cable to a display. A USB-A to USB-C cable provides power to the switch's 'USB-C DC5V' port.
1-In 2-Out Mode
Connect one signal source to the switch's DP OUT port. Connect the switch's DP IN 1 and DP IN 2 ports to two different displays. Use the switch button ⚙️ to select which display shows the signal source's content. Indicator light 1 or 2 will illuminate blue.
Diagram Description: The diagram shows one signal source connected via a DP cable to the switch's 'DP OUT' port. The switch's 'DP IN 1' and 'DP IN 2' ports are connected via DP cables to two separate displays. A USB-A to USB-C cable provides power to the switch's 'USB-C DC5V' port.
Specifications
Resolutions and DP Cable Requirements
| DP Port Specification | Resolutions | Cable Length (input) | Cable Length (output) | Wire Gauge | Total Cable Length |
|---|---|---|---|---|---|
| DP cable (OUT) | 4K@60Hz | < 2 m / 6.56 ft | < 3 m / 9.84 ft | 28AWG | ≤ 5 m / 16.40 ft |
| 4K@30Hz | < 3 m / 9.84 ft | ≤ 5 m / 16.40 ft | 28AWG | ≤ 8 m / 26.24 ft | |
| 1080P@60Hz | ≤ 5 m / 16.40 ft | < 5 m / 16.40 ft | 28AWG | ≤ 10 m / 32.80 ft |
Note: When the total cable length exceeds 5 m (16.4 ft), a DP fiber-optic cable may be required to achieve 4K@60Hz.
Power Supply
USB-C 5V/1A
Compatibility
Compatible Systems: Windows/Linux/macOS
Other Features
Hot-swappable, plug and play
Dimensions
L51 × W51 × H13.5(mm) / L2.0 x W2.0 × H0.5 (in.)
Precautions
- Disconnect power when the product is not in use for extended periods.
- This product requires power to operate. Use a standard voltage (DC5V±5%) power adapter.
- Do not attempt to disassemble or repair the product without professional knowledge to avoid damaging precision electronic components.
- Avoid using the product in extreme high or low temperatures, or in dusty, humid environments.
- Do not subject the product to strong impacts, drops, or vibrations. Rough handling can damage the internal circuit board structure.
- To protect the ecological environment, please dispose of this product according to local laws and regulations. Do not treat it as household waste.
- Keep this product out of reach of children.
