JVC Time Alignment Auto Adjustment Installation Guide

JVC-logoJVC Time Alignment Auto Adjustment

JVC-Time-Alignment-Auto-Adjustment-product

Specifications

Specification Details
Product Name JVC Time Alignment Auto Adjustment
Product Type Automatic Audio Calibration Function
Compatible Devices Selected JVC Multimedia and Digital Media Receivers
Calibration Method Automatic Acoustic Measurement
Measurement Device Compatible Calibration Microphone
Audio Processing Digital Signal Processing (DSP)
Adjustment Type Speaker Distance and Time Alignment
Listening Position Driver or selected seating position
Installation Location Vehicle Interior
Calibration Time Approximately 1–5 minutes
Power Requirement Vehicle 12V DC via compatible JVC receiver
Operation Receiver Menu Controlled
Memory Function Stores calibration settings in receiver memory (model dependent)
Environment Vehicle Interior

Auto Adjustment for Time Alignment is Recommended

  • This procedure will improve the handsfree calling experience by minimizing echo that can sometimes be heard during calls.

Installation

Preparation

  • Park the vehicle in a safe and quiet location before performing this operation.
  • Make sure the microphone is connected and mounted in a location that is in close proximity to the driver before starting the measurement.
  • A static sound will be emitted during measurement and gradually increase in volume until the process is completed. You may choose to exit the vehicle and close the doors while the auto adjustment is taking place. (Approx. 2 minutes)
  • Note: If you are using an external amplifier with a Time Alignment function, complete the Time Alignment settings before starting the auto adjustment process.
  • For best results of the auto adjustment of time alignment process:
    • Perform the measurement in as quiet an environment as possible.
    • Close all windows and doors.
    • Turn off the air conditioner and blower fan.

Procedure:

  1. Press the JVC-Time-Alignment-Auto-Adjustment-fig-1 button.
    • The HOME screen appears.
  2. Touch JVC-Time-Alignment-Auto-Adjustment-fig-2.
  3. Touch [SETUP].
    • The SETUP menu appears.
  4. Touch [Connection & AV].
    • The Connection & AV settings menu appears.
  5. Touch [Speech Quality Adjust].
    • A pop-up window appears.JVC-Time-Alignment-Auto-Adjustment-fig-3
  6. Touch [Time Alignment Auto Adjustment].
  7. A confirmation message appears. Touch [Yes] twice.
    • After the second confirmation, the automatic adjustment will begin after 10 seconds.
    • Completed: Automatic adjustment finished successfully.
    • Failed: Automatic adjustment did not complete. Please retry in a quieter environment.
  8. Touch [Close].
  9. Restart the system.
    1. If the adjustment is successful, the Time Alignment values will be applied automatically after restart. The Echo Cancel Level will also be set to “1”.

Note

  • You can cancel the automatic adjustment at any time by touching [Cancel].

Troubleshooting

  • Automatic adjustment failed.
    • The environment may have been too noisy. Please retry the procedure in a quieter environment, ensuring all windows, doors, air conditioning, and blower fans are off.
  • Echo still present after successful adjustment.
    • Ensure the system was restarted after the adjustment. If the issue persists, you may need to manually adjust the Echo Cancel Level or consult a service professional.

Documents / Resources

PDF thumbnailTime Alignment Auto Adjustment
Installation Guide · Time Alignment Auto Adjustment, Alignment Auto Adjustment, Auto Adjustment

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.