jura X10 Automatic Coffee and Espresso Machine
Specification
- Model: X10 (EA/SA/INTA)
- Dimensions: 470mm x 373mm x 461mm
- Power Supply: Socket 230V / 10A
Installation Requirements
Ensure the following for installation:
- Horizontal surface resistant to water
- Ambient conditions as specified
- Connections by approved personnel before JURA technician setup
Setup Procedure
- Place the machine on a stable, flat surface.
- Connect the necessary hoses and pipes according to the provided instructions.
- Fill the water tank with fresh water.
- Insert the CLARIS Pro Smart+ filter cartridge.
Operating the Machine
- Turn on the power supply.
- Follow the user manual instructions for selecting your desired coffee specialty.
- Monitor the machine during operation for any alerts or maintenance needs.
Technical documentation
- Supplied as standard
- Automatic speciality coffee machine Z Milk system cleaner (mini tabs)
- Container for milk system cleaning Z CLARIS Pro Smart+ filter cartridge Z Welcome Pack:
- Instructions for use
- Cleaning tablets
- Silicone hose and connector
- Spanner for aroma preservation cover, water tank cover, and grinder adjustment wheel
- Requirements for installation location
- Horizontal surface that is not sensitive to water Z Ambient conditions:
- Air humidity max. 80%
- Ambient temperature 10–35°C
- The required connections at the customer’s premises must be carried out by an approved qualified person before the JURA service technician can set up the machine at your chosen location.
- Please make sure that the building connections are as close as possible to the location of the machine (refer to length of connection pipes). Always note the information in the instructions for use for your coffee machine (Chapter 3 “Preparing and using for the first time” – “Requirements for first-time use” / “Setting up the machine”).
Dimensions
General space needed
Holes for coffee grounds disposal/dripp drain set X line and fresh water kit X line
- Position of separate holes in work surface for permanent water connection and drain hose
- Position of drain hose
- Position of permanent water connection
- Minimum distance between hole and machine: 40 mm
- Position of shared hole in work surface for permanent water connection and drain hose
- Position of drain hose
- Position of permanent water connection
- Minimum distance between hole and machine: 40 mm
- Position of hole in work surface for coffee grounds disposal
FAQS
Q: What should I do if the machine displays an error message?
A: Refer to the user manual for error code explanations and troubleshooting steps. If the issue persists, contact customer support.
Q: How often should I clean the milk system?
A: It is recommended to clean the milk system using the provided cleaner tabs after every milk-based drink preparation session.
Documents / Resources
 |
jura X10 Automatic Coffee and Espresso Machine [pdf] User Guide 15669, X10 Automatic Coffee and Espresso Machine, X10, Automatic Coffee and Espresso Machine, Coffee and Espresso Machine, Espresso Machine, Machine |
 |
Jura X10 Automatic Coffee and Espresso Machine [pdf] User Guide 15669, 15669, X10 Automatic Coffee and Espresso Machine, X10, Automatic Coffee and Espresso Machine, Coffee and Espresso Machine, Espresso Machine, Machine |
 |
jura X10 Automatic Coffee and Espresso Machine [pdf] Instruction Manual X10, X10 Automatic Coffee and Espresso Machine, Automatic Coffee and Espresso Machine, Coffee and Espresso Machine, Espresso Machine, Machine |
 |
jura X10 Automatic Coffee and Espresso Machine [pdf] Instructions X10, X10 Automatic Coffee and Espresso Machine, Automatic Coffee and Espresso Machine, Coffee and Espresso Machine, Espresso Machine |