jura J8 twin A Super Automatic Espresso Machine
Specifications
- Model: J8 twin (A)
- Router Frequency: 2.4 GHz (not 5 GHz)
- Channels: 1 to 11 (not higher)
- Wi-Fi Settings: Disable the 20 / 40 MHz Coexistence
FAQs
- Q: What should I do if my coffee machine is not displayed during setup?
- A: Make sure the Wi-Fi Connect is plugged in correctly and follow the instructions to connect it to the app.
- Q: Can I change the Wi-Fi password later?
- A: Yes, you can update the Wi-Fi password through the machine settings in the J.O.E. app.
PRODUCT INFORMATION
- Check smartphone and J.O.E.® app version:
- Is the latest app version installed?
- Android-Version 8.0 (or higher)
- iOS-Version 14.0 (or higher)
- Check permissions:
- Are Location Services for the app J.O.E.® turned ON?
- Are all permissions given to J.O.E.®?
- Is the WLAN allowing everything?
- Is your Bluetooth ON?
- Check WLAN settings:
- Router frequency set to 2.4 GHz (not 5 GHz)
- Channels 1 to 11 (not higher)
- Disable the 20/ 40 MHZ Coexistence
- The Wi-Fi password must be known
PRODUCT USING INSTRUCTIONS
Connect your smartphone to the WLAN and switch on Bluetooth.- Open the location settings.
- Always allow location access for the J.O.E.® app.
- Open the cover of the powder chute for ground coffee.
- Pull out the powder chute for ground coffee.
- Plug the Wi-Fi Connect into the coffee machine‘s service socket. (Some models already have it plugged in)
- Switch on the coffee machine.
Touch 
the top to open the JURA Cockpit.
- Touch the ‘Machine setting’
symbol.
- Touch ‘Connections’.
- Touch ‘Connect’.
- Continue with the next step of these instructions.
- Open the J.O.E.® app on your device.
- Touch ‘Machines’
- Touch ‘Set up new coffee machine’
- Check whether Bluetooth and Wi-Fi are active (outlined green).
- If not, connect your device to your WLAN and switch on Bluetooth.
- Touch ‘Next’
- If you have already plugged in the Wi-Fi Connect, you can touch ‘Next’. Otherwise, first plug in the Wi-Fi Connect as described.
- Your coffee machine should now be displayed.
- Touch ‘Connect’.
- Give your coffee machine a name and touch ‘Next’.
- Enter the desired pin or skip this step.
- Enter the Wi-Fi password. It must be the same as the one you used to connect your smartphone.
- Touch ‘Next’.
- Touch ‘Next’.
- Touchback until you are on the start screen. (Some machines do this automatically)
- Touch ‘Done’.
- Touch ‘Connect’. You have 30 seconds to do this.
- If you were unable to connect, check all the settings from the prerequisites and try again.
- If you still have problems with the onboarding, go to the J.O.E.® app under ‘More’ (bottom right) and call our Digital Customer Support.
Documents / Resources
 |
jura J8 twin A Super Automatic Espresso Machine [pdf] Instruction Manual J8 twin A Super Automatic Espresso Machine, J8 twin A, Super Automatic Espresso Machine, Automatic Espresso Machine, Espresso Machine, Machine |