Product Information

This product is an H-Type Adapter designed for installation purposes. It is used to connect and insert an adapter box into a track. The adapter box has a latch and a polarity line that need to be aligned correctly for proper installation.

Key Features:

• H-Type Adapter
• Latch mechanism
• Polarity line
• Track compatibility

Product Usage Instructions

1. 1. Locate the latch and the polarity line on the adapter box.
   2. Align the parts as shown in the diagram below.
   3. Insert the adapter box into the track.
   4. Rotate the adapter box in the opposite direction of the arrows until the latch snaps in place between the two track rails.
   5. Continue to depress the latch until the adapter box reaches its final position.

1. 1. For second circuit positioning:
      1. Hold onto the Adapter Box with one hand.
      2. Place the end of a flat head screwdriver under the contact shown in the diagram below.
      3. Gently pull up on the screwdriver, causing the contact to move vertically until it hits a hard stop.
      4. Follow the instructions for inserting the adapter box into the track.

INSTALLATION INSTRUCTIONS

• Find the latch and the polarity line.
  Align parts as shown below and insert the adapter box into the track.
• Rotate the adapter box opposite the arrows until the latch snaps in place between the two track rails
• Final Position