JOYO D-SEED II Dual Channel Digital Delay Owner's Manual

Thank you for purchasing this product! In order to use this product properly and safely, please read this owner’s nanual carefully before operating this product, and keep it for future reference.

Intended use

This device is intended to be used for sound processing of signals from musical instruments with electromagnetic pickups. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for

Safety Instructions

This product is precision electronic device, don’t open its case for any reason on your own, if the product malfunctions due to it, you will no longer enjoy the factory warranty.
It contains small parts that may be a choking hazard to infants and children. Keep the plastic cover and packages away from infants and children.

It’s for indoor use only, on electric guitars, don’t use it outdoors.
Please note that this product is hand-held only, and keep your hands dry during use. Any other unmentioned usage or operating condition will be deemed as misuse, which may cause personal injury or property damage. We will not be liable for damages or losses arising from your misuse.

Recycle the packages and waste electrical equipment via correct disposal methods, the customers should comply with the related current legislation of their own country/region regarding the dispose of waste electrical equipment.
As for repair, only contact the repair technician for assistance.

Softener note – possible staining due to abrasion of the rubber feet.
Possible hearing damage due to high volume with using the device!

Fire hazard due to incorrect polarity!
External power supply – does the voltage specification on the device match your power supply network, is there an earth leakage circuit breaker, disconnect the device from the network when not in use.

Product introduction

JOYO D-SEEDⅡis an updated version of D-SEED, with 8 built-in delay effects and 1 LOOPER mode, and a switchable PingPong effect. Meanwhile, it features stereo input and output, TAP TEMPO function and TAP beats,besides, you can change TAP TEMPO’s speed into the delay effect’s TIME value based on what TIME/BEAT knob’s beats indicate. D-SEEDⅡadopts dual-channel design(default), each channel can save its own delay effect and the related parameters under its own channel respectively, therefore, you can use different delay effects to polish your tone when necessary. A maximum of 2 seconds delay (in TAP TEMPO mode) can meet most performers needs.

D-SEED Ⅱ features 8 different built-in delay effects:

SPACE: it adds a REVERB effect after delay effect, obtaining spatial tone.
LO-Fl: it adds resampling filter to delay effect, imitating the early electric music’s lo-fi crude tone.

FILTER: it adds a periodical varied modulation filter into the delay effect, and changes with the delay time, obtaining a delay effect changed according to thebeats.
TAPE: simulates the classic smooth tape delay sound.

COPY: copy your instrument’s tone, without any polish.
ANALOG: offers a warm analog delay sound, like the early BBD delay effects pedals, together with modern digital technology, you can get a maximum of 2 seconds delay time.

MODULATION: a modulation delay sound. it’s characterized by wide and spatial tone，bringing out the best when you’re playing the Clean tone for the performance.
REVERSE: an interesting effect, it will play the delayed verse reversely, creating a quite psychedelic feeling.

Features

Stereo dual footswitch delay pedal
8 delay mode and 1 LOOPER mode

TAP TEMPO footswitch and TAP beats selection
Switchable PingPong effect

Mixed TIME&BEATS control knob
A maximum of 3.5minutes recording time

PANEL

TYPE: 9 position switches, 8 delay modes are available, 1 LOOPER, no delay effect when in LOOPER mode.
NORMAL/PINGPONG: PingPong function switch, turn on/off the PingPong effect.

TIME BEAT/LP.FX:Ajust the TIME value in delay mode: Turn the knob to get the TIME value. 2 When you are using the TAP TEMPO function, adjust the TIME value based on what the knob indicates.
LOOPER mode: control the depth of playback effect similar to analog TAPE’s effect)
LEVEL/LP.LEVEL: In delay mode, it controls the level of delay effect, in LOOPER mode, it controls playback’s level.
Dual Output Jack: stereo dual output jack.
F. BACK/LP. TONE: In delay mode, it controls FEEDBACK, in LOOPER mode it controls playback’s TONE
Red&green LED light: indicating FAVORITE( green light is on) or TEMPO (red light is flickering). LOOPER mode(red&green LED indicating REC/PLAY etc
REC/DUB: Tap the FAVORITE footswitch in DELAY mode, press and hold the FAVORITE footswitch and enter to TAP TEMPO function, in LOOPER mode, it controls LOOPER’s recording and dubbing.
PLAY/STOP: controls the delay effect’s ON/OFF in delay mode and control the LOOPER playing, pause and delete in LOOPER mode.
Red &green two color LED light: indicating DELAY switch’s status(gre Indicating LOOPER’s status yellow and is on).
Dual input jack: stereo dual input jack.

Operation

Delay mode:

Turn it on first and then tap the right footswitch, you can choose your desired DELAY sound by the TYPE switch.
LEVEL, F.BACK, TIME knobs adjust DELAY effect’s related *Normal/PingPong toggle switch, namely, whether to turn on the right and left PingPong function or not. (2 amps are needed for the desired PingPong effect )
The left footswitch is a FAVORITE(preset) function, green is FAVORITE status, and when it’s off, you see what you get. When you’re in FAVORITE status, the tone you’ve adjusted will be saved automatically once you exit from it, and for reference when you enter next time.
Press the FAVORITE footswitch and keep for 1.5 seconds to enter TAP TEMPO function, stop this operation for 3 seconds, it returns to the normal function automatically. Namely, when it enters to TAP TEMPO function temporarily, the left LED light starts flickering according to the current speed.
In BYPASS mode, press and hold the FAVORITE footswitch you can switch on or switch off the effect trail on, after you press the FAVORITE footswitch and hold, it starts to flicker, if flickering in red, it indicates switch on the effect trail on. If flickering in green, it indicates switch off the effect trail on.

LOOPER mode:

When TYPE is placed at LOOPER, the right LED is in yellow, and enter to LOOPER status *REC: in EMPTY mode, toe down the REC/DUB footswitch(the left LED is red and flicking)
DUB: In REC, PLAY, STOP modes, toe down the REC/DUB footswitch(the LED on the left is in red)
PLAY: In REC, PLAY, STOP modes, toe down the REC/DUB footswitch(the LED on the left is in green)

STOP: In PLAY mode, tap PLAY/STOP footswitch(the green LED on the left is flickering)
CLEAR: In any mode of LOOPER, press PLAY/STOP footswitch and hold (the LED on the left is flickering quickly and gradually goes off.) (the recorded sound tracks won’t be saved if switching TYPE or turn off)

How to connect

Specifications

L/R input: 6.35mm mono socket
L/R output: 6.35mm mono socket
Input impedance: 2.2MQ

Output impedance: 1000
Working current: 220mA
Working voltage: DC9V(center minus)

Dimensions: 105*46*105mm
Weight: 555g

Disclaimer: any specification update won’t be amended in this manual.

Disposal of the packaging material

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc.are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

Disposal of your old device

Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

JOYO TECHNOLOGY CO., LTD

Address: 2/F, Lushi Industry Building, 28th District, Bao’an, Shenzhen www.joyoaudio.com Email:info@joyoaudio.com Tel: 0086-755-297 JOYO Technology is committed to guarantee the highest qua parameters or pictures are only for your information, subject

FAQs

Q: Can this device be used with acoustic instruments?
- A: No, this device is specifically designed for use with musical instruments equipped with electromagnetic pickups.
Q: Is it safe to use this device outdoors?
- A: No, the device is intended for indoor use only, especially on electric guitars. Outdoor use may lead to damage due to environmental factors.

Documents / Resources

JOYO D-SEED II Dual Channel Digital Delay [pdf] Owner's Manual
D-SEED II Dual Channel Digital Delay, D-SEED II, Dual Channel Digital Delay, Channel Digital Delay, Digital Delay

References

User Manual

JOYO D-SEED II Dual Channel Digital Delay

PRODUCT INFORMATION