JOHN LEWIS Mini LED Mushroom Table Lamp Set
Specifications
- Max power: 2 x 2W LED 2 x 3000K 129Lm
- INPUT Max.: 5W DC 5V 1A
- Battery: 3.6V 3600mAh
- IP rating: 20
- Weight: 2 x 0.50kg
- Charging time: 8 hours when fully discharged, 4 hours (approx.) in normal use
- Direct current
Replaceable light source by a professional
- For further information, please visit: www.lighting-info.co.uk/106266
Operating Instructions
To operate the lamps
- Touch the buttons on the back of the lamps for on/off and dimming control.
- One touch for low light level, second touch for brighter, third touch for brightest, and the fourth touch to turn off.
- When used on the brightest setting, the lights may start to dim after 6-8 hours. Recharge the lamps until the light indicator turns green (approx. 4 hours).
- Always unplug the lamps after charging and avoid using them while charging to extend the battery
Product information
- Indoor use only
- 3-step dimmable
- Clean the fitting with a soft, dry cloth. Do not use abrasive chemical cleaners, as this will damage the finish.
- This product contains Li-ion batteries
Aftercare and Troubleshooting
- Please note that the touch sensor will use a small amount of current at all times and will slowly drain the battery even when the light is off.
- If you find the lamp turning itself off, even when the product is put on charge, it means the battery has been almost completely drained and needs initial charging before the lamp can be switched on again. Please refer to Step 4.
- If there are technical issues with this product that you are unable to resolve, please contact your nearest John Lewis & Partners shop or call Technical Support on 03301 230106.
2-year guarantee
At John Lewis & Partners, we test every light to the highest quality standards. That means we can offer you a 2-year guarantee.
Recycling
This symbol indicates that this product should not be treated as normal household waste, and it should be recycled. John Lewis & Partners do not operate instore take back, but as members of the Distributor Take Back scheme, have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility, or for further details, contact your local council or visit www.recycle-more.co.uk.
Getting started
Thank you for purchasing this John Lewis & Partners product. For your safety, and to make sure everything is working properly, please read the instructions carefully before use.
Warnings
- This product is battery-powered, and the internal battery is recharged via a supplied USB-A to USB-C cable.
- This product should only be connected to equipment of Class II or Class III. Batteries are only to be charged by persons over 8 years of age.
- Only charge via an input max. 5W DC 5V 1A SELV plug-in adapter (phone charger or similar USB outlet).
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- This product is for indoor use onl, and is not suitable for a bathroom or outdoor location.
- Do not plug this product directly into the mains or by other means other than the supplied cable.
- The transformer or power supply is not a toy.
- This product is not suitable for children under 3 years of age.
- The battery must not be opened, destroyed or incinerated.
- The battery in this product is non-replaceable, and if damage occurs must be disposed of responsibly.
Parts list
Description | Image | Quantity |
Light fittings |
|
x 2 |
Shades | ![]() |
x 2 |
USB cables | ![]() |
x 2 |
Product assembly
Step 1
Carefully unpack the carton, making sure all the parts are present before assembly.
Step 2
Attach the shades (A) by screwing onto the top of the lamps in a clockwise direction. Do not overtighten.
Step 3
Connect the USB cables to the products (B) and to a USB outlet (C) (phone charger or similar USB outlet rated input max. 5W DC 5V 1A).
Step 4
Charge the batteries, which are already fitted to the product, before first use. Ensure the products are fully charged before operating. The light indicator (E) will turn from red to green when fully charged.
Your table lamps are now ready for use.
- To operate the on/off dimmer, touch the buttons (D) on the back of your lamps. (one touch low light level, second touch brighter, third touch brightest and fourth to turn off).
- When used on the brightest setting, the lights will start to dim after 6-8 hours of use. Top up the battery by charging the lamps until the lights
- turn green (approx. 4 hours).
- Always unplug after charging. Do not use while charging to extend battery life.
- John Lewis plc SW1V 2QQ
- johnlewis.com
- Made in China
- Please retain these instructions for future reference.
FAQs
Q: What should I do if the lamp turns off even when plugged into a power outlet
A: If the lamp turns off even when on charge, it indicates thatthe battery is almost drained. Please ensure to fully charge the battery before using the lamp again.
Q: Where can I find technical support for this product?
A: For technical issues, contact your nearest John Lewis & Partners shop or call Technical Support on 03301 230106.
Documents / Resources
![]() |
JOHN LEWIS Mini LED Mushroom Table Lamp Set [pdf] User Guide Mini LED Mushroom Table Lamp Set, LED Mushroom Table Lamp Set, Mushroom Table Lamp Set, Table Lamp Set, Lamp Set |