JPB002
Product Manual
Product Parameters
Product Name: Portable Power Bank
Model Name: JPB002
Battery Capacity: 37Wh
Design Capability: 5V/6200mah | 9V/3500mah | 12V/2500mah
Micro USB Input: 5V dc/2A | 9V dc/2A | 12 V dc/1.5A
Type-C Input: 5V dc/3A | 9V dc/2A | 12V dc/1.5A
USB Output: 5V dc/2A | 9V dc/2A | 12 V dc/1.5A
Type-C Output: 5V dc/3A | 9V dc/2A | 12V dc/1.5A
Wireless Output: 5V dc, 1A 5W/7.5V dc, 1A 7.5W/9V dc, 1.1A 10W
USB+Tpye-C Output: 5Vdc/3A
USB+Wireless Output: 5Vdc/3A
Type-C+Wireless Output: 5Vdc/3A
USB+Type-C+Wireless Output: 5Vdc/3A
Unsupported for using while charging.
Material: Flame Retardant ABS
Operative Temperature: 0-40℃
Altitude: <2000 meter
4 LED Battery Indicators
1 Function Indicator
Weight: 207g
Content
JPB002 Power Bank ×1
Product Measurement:
- vacuum chuck
- wireless charging place
- power switch
- Micro USB input
- USB output
- Type-C input/output
- battery indicator
Wireless Charging
Attach the power bank with the vacuum chunk side aligned to the wireless charging place of your mobile.
Press the power switch with the white light displaying the battery.
Turn on the green light to start the wireless charge.
Wireless charging is in operation when the green light flashes.
Double-tap the power switch to turn off the power bank.
Wired Charging
If your mobile is not available for wireless charging, you can attach the power bank directly on the back of your mobile to use the USB or Type-C cable for connection without pressing the power switch.
The white indicator will light.
The power bank will start the quick charging automatically if your mobile is supportable.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Non-modification Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirements, The device can be used in portable exposure conditions without restriction.
Documents / Resources
 |
Jogeek Technology JPB002 Portable Power Bank [pdf] User Manual JPB002, 2AZ2ZJPB002, JPB002, Portable Power Bank |
