Jingqi Remote Control Device for Walk Device
Product Usage Instructions
- START: Press the button in standby or pause mode, Start running the treadmill.
- STOP: Long Press the button while the treadmill is running or pause mode, Stop the treadmill.
- PAUSE: Short Press the button while the treadmill is running, Stop the treadmill.
- MENU:
- A. Rest is displayed in standby mode, Press the key to switch cycle: ready mode →time counter mode-range reversal mode→Calorimeter mode-Standby mode.
- B. In working condition, Press the key to switch cycle:0.00 → (time) T:00:00→ (distance) D:0.00→ (calorie) C:0000→ (speed) S: 0.00
- SPEED UP and SPEED DOWN:
- A. Rest is displayed in standby mode, Press the key to adjust the parameter settings, Long press to adjust quickly
- B. In working condition short press key to adjust the speed change, Long press to adjust quickly.
- SPEED-2:
In working condition, press key to adjust the speed to 2.0. - SPEED-4:
In working condition, press key to adjust the speed to 4.0. - User Manual
Please add the required statement below into the user manual as required per 15.21
CAUTION: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.
Product overview
Documents / Resources
 |
Jingqi Remote Control Device for Walk Device [pdf] Instructions JQ00001, 2BGX2JQ00001, Remote Control Device for Walk Device, Remote Control Device, Walk Device Remote Control, Remote Control, Remote |
