jimiiot K7800P Wireless Environment Sensor User Manual

The K7800P is a multifunctional sensor that connects to a host
computer using Bluetooth technology. It features built-in
temperature and humidity sensors, a Hall effect door magnetic
sensor, and a light sensor for various applications.

2. Introduction:

2.1 Packing List:

– K7800P Sensor x 1
– Hall Effect Door Sensor x 1

2.2 Specification:

Refer to the specifications list above for detailed information
on size, temperature range, protection rating, and more.

2.3 Build-in Sensors:

– Light Sensor: Detects ambient light changes.

– Hall Sensor: Determines door status by detecting magnetic
fittings on the door.

3. Operating Guidelines:

3.1 Checking the Status of Equipment:

Short press the power button to check the indicator light status
for power-on/off indication.

3.2 Power ON:

Press and hold the power button for 3 seconds to switch on the
device. The LED will light up for 3 seconds.

3.3 Power OFF:

To power off, press and hold the power button for 3 seconds
while the unit is on. The LED will blink three times.

3.4 Activate Bluetooth Connection:

To activate Bluetooth connection, press the button 5 times
within 5 seconds.

Frequently Asked Questions (FAQ):

Q: Can I use the device without the door magnet
accessories?

A: The Hall sensor function requires the use of door magnet
accessories to detect door status accurately. Ensure you have
purchased the necessary accessories for proper functionality.

“`

View Fullscreen

Making Connections Simpler
K7800P Multifunctional BLE Sensor with Door Detection
User Manual
Version:V1.2
Copyright Notice No part of this document may be reproduced, retranslated, or copied in any form or by any means or for profit (electronic, photocopying, taping, etc.) without express written permission of the Company. The company reserves the right to modify product appearance, specifications, or accessories without prior notice.
Copyright © Shenzhen Jimi IoT Co., Ltd. All Rights Reserved.

Smart Tracking Terminal (for Electric Two-Wheelers)
1. Overview
The KB700P is a multifunctional sensor that uses Bluetooth communication technology to connect to a host computer (cell phone or Tracker). It has a built-in temperature and humidity sensor, Hall door magnetic sensor and light sensor. Easy installation makes it easy to use in a variety of application scenarios.
1.1 Schematic Diagram

Smart Tracking Terminal (for Electric Two-Wheelers)

2. Introduction

2.1 Packing List

K7800P

Hall Effect door sensor 1

PCS PCS

2.2 Specification

Size Operating Temperature Storage Temperature Protection Rating Transmission Distance Frequency LED Side Button Front Button Operating Time

40*40*15 mm -20°C to 70°C -40°C to 60°C IP65 50m (Open area) 2.4 GHz, supports BLE 4.2 Indicates working status Switches operating mode Not available 3 years (3000ms broadcast interval) 2 years (2000ms broadcast interval)

Optional

Smart Tracking Terminal (for Electric Two-Wheelers)
2.3 Build-in Sensors
Light sensor On the front side of the sensor for detecting changes in ambient light. Can be used as an open box test for opaque containers.
Hall Sensor Determine door opening and closing status by detecting the approach and departure of magnetic fittings on the door. This function must be used with door magnet accessories, please make sure you have purchased door magnet accessories.

Smart Tracking Terminal (for Electric Two-Wheelers)
Environment sensor Temperature and humidity in the environment can be detected. Temperature performance Range: -20~+70 Accuracy: 10~50, error: ± ±50, error: -20~+70 Accuracy: 10~50, error: ±0.5; 10 or 50, error: ±2 Humidity performance Range: 0%RH~100%RH Accuracy: 0%RH~90%RH, error: ±2.5%RH; 90%RH, error: ±3.5%RH

Smart Tracking Terminal (for Electric Two-Wheelers)
3. Operating Guidelines
3.1 Checking the status of equipment
Short press the power button and observe the indicator light; if the indicator light is on for 1s and then off, it means the device is in the power-on state. If the indicator light is not on, the device is in the off state.

3.2 Power ON
Press and hold the power button for 3 seconds, the unit will switch on while the LED lights up for 3 seconds and then goes out.

Smart Tracking Terminal (for Electric Two-Wheelers)
3.3 Power OFF
Press and hold the power button for 3 seconds while the unit is switched on, the unit shuts down while the LED blinks three times.
3.4 Activate Bluetooth connection
If you need to connect the device using the Bluetooth tool, press the button 5 times within 5s and the device will activate the Bluetooth connection.

Smart Tracking Terminal (for Electric Two-Wheelers)
4. Certification
FCC Compliance Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Documents / Resources

jimiiot K7800P Wireless Environment Sensor [pdf] User Manual
K7800P, K7800P Wireless Environment Sensor, Wireless Environment Sensor, Environment Sensor

References

User Manual

jimiiot K7800P Wireless Environment Sensor User Manual

K7800P Wireless Environment Sensor

Specifications:

Product Usage Instructions:

1. Overview: