JetStream Crossbar with Skyline Mount
MEASUREMENTS
- Front Crossbar
Inner edge of driver’s side leg to inner edge of passenger’s side leg 890 mm - Front Crossbar
Corner of painted or glass roof to leading edge of front pad or foot N/A - Rear Crossbar
Inner edge of driver’s side leg to inner edge of passenger’s side leg 852 mm - Crossbar Spread
Rear edge of front crossbar to rear edge of rear crossbar. 795 mm
PITCH SETTINGS
- Pitch 1
Adjustment on the front legs to help keep the crossbars level A - Pitch 2
Adjustment on the rear legs to help keep the crossbars level B
LANDING PAD DETAILS (LP22)
- Pad Type
Part number to indicate which pad shape to use 5023013 - Pad Orientation
Indicates which way to place the pads on the vehicle Arrow OUT <II> - Washer
Washers to be used on each bolt to secure the bar/s M6 - Front Bolts
Which bolts from the pack are required to secure the front bar M6x33 mm - Mid Bolts (3 Bar Fits only)
Which bolts from the pack are required to secure middle bar in 3 bar fits N/A - Rear Bolts
Which bolts from the pack are required to secure the rear bar M6x33 mm
Documents / Resources
 |
JetStream Crossbar with Skyline Mount [pdf] Installation Guide LP22-V8011-01, 5023013, Crossbar with Skyline Mount, Crossbar Mount, Skyline Mount, Mount |