JETPRIME JPPLS056 Left Handlebar Switch
Specifications
- Product Name: LEFT HANDLEBAR SWITCH
- Model: JP PLS 056
- Material: S1125 resin
Important Note
All JETPRIME products are designed for racing use only and should be installed by an expert. Warranty is limited to defects recognized by the technical department and normal use. Avoid improper installation, operation, modification, or racing use to maintain warranty validity.
Frequently Asked Questions (FAQ)
Q: Can this handlebar switch be used on any motorcycle?
A: Do not install the product on a motorcycle for which it was not designed or tested by JETPRIME to ensure proper functionality and safety.
TECHNICAL FEATURES
- CNC-machined anodized aluminum body
- stronger and lighter than the original part
- IP69K protection
- laser engraving wired with RAYCHEM 105° cable and sealed with RAYCHEM S1125 resin
INSTALLATION
This product is plug-and-play, no modification is required on the bike:
- make sure the ignition is turned off
- disconnect and remove the original handlebar switch (refer to the manufacturer’s workshop manual)
- install the JETPRIME handlebar switch on the handlebar using the provided bolts, and tighten to 10 Nm
- connect the wiring to the original connectors
FUNCTIONS
- HIGH BEAMS/PASS (see note)
- UP
- LEFT TURN INDICATOR (see note)
- DOWN
- ENTER
- RIGHT TURN INDICATOR (see note)
- HORN
- MODE
- DOWN (PARAMETER MENU)
- UP (PARAMETER MENU)
- SELECT (PARAMETER MENU)
- HAZARD
NOTE
The following buttons work differently from those on the original handlebar switch:
- Button 1
- press shortly to activate pass light (flashing)
- keep pressed for more than 1 second to turn on high beams
- press again shortly to turn them off
- Button 3 and 6
- press once to activate the turn indicator
- press again to deactivate it
JETPRIME S.R.L.
Via Eugenio Montale, 1
41016 Novi di Modena – Rovereto sulla Secchia (MO)
Phone: +39 059 672223 – Email: info@jetprime.it www.jetprimeshop.it
- All JETPRIME products are designed for racing use only and should be installed by an expert.
- The manufacturer, importer, or dealer shall not be liable for any damage caused by improper installation or operation of the JETPRIME product.
- The warranty is limited to defects recognized by our technical department and to normal use. The warranty is void in case of accident, modification, improper or racing use.
- Do not install the product on a motorcycle for which it was not designed or tested by JETPRIME.
- The technical specifications of JETPRIME products and related products are subject to change without notice.
Documents / Resources
 |
JETPRIME JPPLS056 Left Handlebar Switch [pdf] Instruction Manual JPPLS056 Left Handlebar Switch, JPPLS056, Left Handlebar Switch, Handlebar Switch, Switch |
