Red light instructions during charging: While the device is
charging, the red light stays on. Once the battery is fully
charged, the red light turns off.

Startup state: Blue light flashes for 2 seconds then turns
off.

Bluetooth Pairing

Press the pairing button once, and the blue light will blink
slowly to indicate pairing mode is active.

If the blue indicator blinks quickly 5 times, it signifies a
successful pairing.
If there is no connection made within 60 seconds, pairing mode
will be canceled.

Included Items

- Key Function Guide
- Go to the iOS Home Screen
- Decrease/Increase screen brightness
- Take a screenshot
- Adjust sound volume

Safety Tips

FCC Statement: Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Caution: Any changes or
modifications not approved by the manufacturer could void your
authority to operate the equipment.

RF Exposure Information: The device meets general RF exposure
requirements and can be used in portable exposure conditions
without restriction.

FAQ

Q: How do I know if my device is fully charged?

A: The red light will turn off once the battery is fully
charged.

Q: What should I do if Bluetooth pairing fails?

A: If pairing fails, try restarting both the controller and the
device you are trying to pair with, then attempt pairing again
following the instructions provided.

Q: Can I adjust the brush size with this controller?

A: Yes, you can decrease or increase the brush size by using
specific key combinations as outlined in the Key Function Guide
included.

“`

View Fullscreen

iM s4sao
4

-utm +Ls

-0UME

0 +LME

Rug

S4MFLE

4
mLEE

Iitions

NIE

#
EMM50

-5305

0UICXMENU

c
0

b
u0

ProGuide Procreate Controller

Product Details

Specifications
·Product Code:JCP3110 ·Materals:ABS,Aluminlum alo ·Dimensions 146.8 x13.8xt3mm ·Weight 168g ·Bluetooth Version:5.0 ·Buetooth Name:ProGuide ·Wireless Distance:8M

·Charging Method USB-CCable

·Battery ·Working ·Charging ·Charging

Capadity:300mAh Voltage:37V Oument 200mA Time:<2 hours

·Standby Time:7days

·Hibemation Time:30min

Compatibility
Supports iPad OS system Compatible with iPad OS13.4 or above

Directions for Use
·Toggle the black power switch to the On position and the blue indicatorlight will quickly flash to indicate the controller is on. ·Tap the Bluetooth button and the indcator light blinks slowly to show the controller isready to pair with your iPad.
·Turn on Buetooth on your iPad,select the name “ProGuide”and dick pair to connec the ProCreate to youriPad.

Bluetooth

To use the Eye Dropper/Color Sample button on the controller please update the ProCreate app on your iPad to thenewest version.
To enablethe Smudge Tool inProcreate goto Setings>Gesture Controls. Select Smudge Toolthen enable the “O+Touch”option.Now when you hold the Smudge button on the controller the Smudge Tool wil beactve.

Indicator Light

Low woltagc indicatoc Whcn the woltagcis bwcrthan33M,the md lght binks slowly
Red lght irsiruclilans Changing statc Whcn thedovioe ischanging,therod light gaysit.Onoethe bamey is fm he medlghttumso

Startup stato:Buclighths for 2sooondsandthcn turms o

Bluctooth palrhg:1 Prossthepatingbumononog,and the buc lightwiblinkslowlyjto

Buelight hgmuctions

ndicaie palrhgmodeis acive 2.f the blueindicanon blinks quichysh times,this indicabos the

paiting is uooessfu

3.Amcr 60 scoonds wthout oonmechilon pairingmodewilbe cafod

“Aerthedeslco ts powcod on agah orwobenumathedesltclsautomaitalyconnecdod backtothe pihod desloc.A quickibh hdcates that thecomccion issucossfuL

Included Items
ProGude Procreate Controllerx1 Carmy Pouchx¹ USB-CCharging Cablex1 Product Manual x1

Key Function Guide

Go to the iOS Home Screen Decrease the screen brightness Increase the screen brightness Take ascreenshot Reduce the soundvolume

Transformlayer X Fullscreenview
Color sample tool
Color selector 5 Selection tool

0 Increase the sound volume 44 Previous audio track
ll Play/Pouse udlo
p Nest audlo track 5 Prevlously selected color
Cut the cumentlayer Copy the cument layer

Adjust Hue/Saturation/Bnightness 47 Adjustcolor balance
Erasertool k Actions menu
Layers menu Smudge tool Brush tool

Paste the copied lyer c Undo the last action b Redo the undone action

O Decrease brush size 5% Ihcrease brush slze 5%
AIEKNEI Openthe qulck menu

Press for shortout hist Hold this key and press one of the bush size keys to make smaller 1%sizeadustments to the brush

Safety Tips
·Avoid dropping the ProGuide. ·Never disassemble ormodifly you ProGuide controller for any reason ·Keep the ProGuide dryand do not submerge itin water
·Keep out of reach of children-the smal parts maybe achoking hazard ·Clean wth a dry,soft lint-free cloth,do not use harsh chemicals or strong
detergents. ·Do not expose the ProGuide to excessiveheat or humidity

Key Function Guide
FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receivingantenna.

· Increase the separation between the equipment andreceiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

· Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Documents / Resources

JCPAL JCP3110 Procreate Controller [pdf] User Guide
2BLDN-JCP3110, 2BLDNJCP3110, JCP3110 Procreate Controller, JCP3110, Procreate Controller, Controller

References

User Manual

JCP3110 Procreate Controller