POWERED SPEAKER WITH BLUETOOTH
QUICKSTART GUIDE

POWER ON THE UNIT

1. Connect the power cord to the Power Receptacle (L).
   2. Press the Power Standby [H] switch for .5 of a second to engage power.

PLUG-IN THE INPUTS

1. Turn the Master Volume Control (J) all the way to the left before connecting any inputs.
2. Connect your devices to the Input Jacks (E).

SET UP THE CHANNELS

1.  Select a Preset using the EQ Preset Selection Button (B).
2. Determine the CH1 & CH2 Gain (D) source. For microphone set to 3 o’clock. For line source set to 9 o’clock.
3. Slowly turn the Master Volume (J) to the right until the desired volume is reached.

PAIR  AUDIO

This device supports Bluetooth audio streaming.
To connect your device:

1. Turn on Bluetooth on your source device.
2. Hold the Bluetooth (I) button for 2 seconds. The LED will blink when the IRX Speaker is in pairing mode.
3.  Find the desired IRX speaker on your device and select.

PLACE IN DESIRED LISTENING POSITION

Main Speaker Position

For complete documentation, visit www.jblpro.com/irx100-series
JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA © 2019 Harman International Industries, Incorporated
IRX108BT/112BT Quickstart Guide – 10/2019

Documents / Resources

JBL IRX108BT Powered Speaker with Bluetooth [pdf] User Guide IRX108BT, IRX112BT, Powered Speaker with Bluetooth

References

• User Manual