TR245,TR470 Soldering Tool for Robot
“
Specifications
- Model: TR245/TR470
- Application: General/Heavy Duty Soldering Tool for Robot
- Cartridge Compatibility: R245 for TR245, R470 for TR470
- Control Unit Compatibility: UCR245 for TR245, UCR470 for
TR470
Product Usage Instructions
Assembly
1. Assemble the soldering tool with the electrical insulator
(Ref. 0020440) fixed in place. Do not remove the insulator.
2. Ensure that the soldering tool is fixed and electrically
isolated if assembled differently.
Inserting and Removing Cartridges
1. Ensure the power is off and both the tool and cartridge are
cold before any manual operation.
2. Turn off the air pressure before removing or inserting the
cartridge.
3. Insert the cartridge into the soldering tool until it reaches
a limit stop inside, matching the square shapes of the tool and
cartridge.
4. Use an Allen key to fix the cartridge securely in place.
Maintenance
1. Always unplug the tool before performing maintenance.
2. Clean the tool with a damp cloth; use alcohol only for
cleaning metal parts.
3. Periodically check and clean all cable and tube
connections.
4. Keep the tip surface clean and tinned to prevent tip
oxidation when storing.
FAQ
Q: What cartridges are compatible with TR245 and TR470?
A: TR245 works with R245 cartridges, and TR470 works with R470
cartridges.
Q: How do I insert a cartridge into the soldering tool?
A: Make sure the power is off and both the tool and cartridge
are cold. Insert the cartridge matching square shapes until it
reaches a limit stop inside, then secure it with an Allen key.
Q: How should I maintain the soldering tool?
A: Always unplug before maintenance, clean with a damp cloth,
periodically check connections, and keep the tip surface clean and
tinned to avoid oxidation.
“`
INSTRUCTION MANUAL
TR245/TR470
General/Heavy Duty Soldering Tool for Robot
This manual corresponds to the following references: – TR245-B works with R245 cartridges – TR470-B works with R470 cartridges
Packing List
TR470
TR245
Soldering Tool for Robot …………………… 1 unit According to purchased reference.
Clamp ………………………… 1 unit
Electrical Insulator ……………………. 1 unit
Screw DIN 912 M3x10…………. 2 units
Screw DIN 912 M4x16…………. 1 unit
Manual ……………………. 1 unit Ref. 0028118
2
Assembly
TR245 General Soldering Tool for Robot*
TR470 Heavy Duty Soldering Tool for Robot*
Electrical Insulator Ref. 0020440 The electrical insulator must be assembled for the tool to work properly. Do not remove the insulator.
Clamp
Screw
* If the soldering tool is assembled differently, it must be in such a way that it is fixed and electrically isolated.
3
Assembly with RBA
RBA Soldering Head
for Robot*
RBA
RBA
TR245 Soldering Tool
Tool Cable* Ref. 0021403 TR is connectable to UCR by using the tool cable
TR470 Soldering Tool
* Not included, sold separately.
4
Screws Ref. 0722900
Inserting and Removing Cartridges
For any manual operation make sure the power is off and both the tool and cartridge are cold. Before removing or inserting the cartridge, make sure the air pressure is off.
Insert the cartridge and press lightly until it is placed in the soldering tool (a). Use an Allen key to fix the cartridge in the handle (b).
The square recess of the soldering tool must be matched with the square shape of the cartridge. Insert the cartridge until the two square shapes come to a limit stop inside.
b a
Compatibility
TR245 TR470
Cartridge Range R245 R470
Control Unit UCR245 UCR470
RBA, SFR, GSFR and CLMR/CLMRP are compatible with both R245 and R470 ranges.
Cartridge Range
Find the cartridge model that best suits your soldering needs on www.jbctools.com.
Chisel
Pin / Connector Drag
5
Workplace Example
HM Soldering Set
Cartridges are changed manually.
HM245 General Set – works with R245 Cartridges
HM470 Heavy Duty Set – works with R470 Cartridges
RBA Soldering Head
UCR245/CR470 General/Heavy Duty Control Unit
SFR Solder Feeder
GSFR Guide Kit
R245/R470 Cartridge Range
TR245/TR470 General/Heavy Duty Soldering Tool
CLMRP Tip Cleaner
6
Dimensions
B RING
IRON
FOR
Soldering Tool AUTOMATTIOR2N45
TR470-B SOLDERING IRON FOR AUTOSMoAldTeIOrinNg Tool
TR470
142 5.59 7 0 2.76 161,5 6.36 60,5 2.38
18 0.709
4,5 0.177
21 0.827
8 0.315
2x 3,2 2x 0.126
4,5 0.177
21 0.827
8 0.315
2x 3,2 2x 0.126
5 5 2.17
1 5 0.591
4 5 1.77
1 5 0.591
4 5 1.77
15 0.591
18,5 0.728
mm (in)
ADDITIONAL DESCRIPTION
DIMENSIONES GENERALES
280921
15 0.591
18,5 0.728
mm (in)
DRAWN BY
A. Santaeularia
RoHS
Compliant
ADDITIONAL DESCRIPTION
DIMTOGELEENNREASRNACILEOSNES GENERALES
7
DRAWN BY
A. Santaeula
5 5 2.17
Maintenance
– Before carrying out maintenance, always unplug the tool. – Use a damp cloth to clean the tool. Alcohol can only be used to clean the metal parts. – Periodically check that the metal parts of the tool are clean so the station can detect the tool status – Periodically check all cable and tube connections. – Maintain the tip surface clean and tinned prior to storage in order to avoid tip oxidation.
Rusty and dirty surfaces reduce heat transfer to the solder joint. – Replace any defective or damaged parts. Use original JBC spare parts only. – Repairs should only be performed by a JBC authorized technical service.
Safety
It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion.
– Do not use the soldering tool for any purpose other than soldering or rework. Incorrect use may cause a fire.
– Do not leave the appliance unattended when it is on. – Be sure that the power supply is disconnected before changing any spare parts. – The temperature of accessible surfaces may remain high after the unit is turned off. Handle with care. – Allow cartridges to cool down before changing them. – Heat can cause inflammable products to ignite even when not visible. – Avoid flux coming into contact with skin or eyes to prevent irritation. – Be careful with the fumes produced when soldering. – Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when
working to avoid personal injury. – Utmost care must be taken with liquid tin waste which can cause burns.
8
Notes
9
Notes
10
Notes
11
Specifications
TR245 General Soldering Tool for Robot Ref.: TR245-B
TR470 Heavy Duty Soldering Tool for Robot Ref.: TR470-B
– Total Net Weight: – Dimensions:
(L x W)
230 g / 0.51 lb 142 x 28 mm 5.59 x 1.10 in
– Total Net Weight: – Dimensions:
(L x W)
236 g / 0.52 lb 161.5 x 28 mm 6.36 x 1.10 in
– Package Dimension: (L x W x H)
– Package Weight:
283 x 79 x 56 mm 11.14 x 3.11 x 2.20 in 319 g / 0.70 lb
– Package Dimension: (L x W x H):
– Package Weight:
283 x 79 x 56 mm 11.14 x 3.11 x 2.20 in 325 g / 0.72 lb
Clamp only – Net Weight: – Dimensions:
(L x W x H)
44 gr / 0.10 lb 55 x 33.5 x 10 mm 2.17x 1.32 x 0.39 in
Complies with CE standards. ESD safe.
Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labor. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
0028118-130625
Documents / Resources
 |
JBC TR245,TR470 Soldering Tool for Robot [pdf] Instruction Manual TR245, TR470, TR245 TR470 Soldering Tool for Robot, TR245 TR470, Soldering Tool for Robot, Tool for Robot, Tool for Robot |