JBC MS40 Paper Filters for Disordering Module
Packing List
MS40 Paper Filters are used with desoldering modules MV-A, MS-A, MVE-A and MSE-A.
Specifications
- Paper Filters: 1 box containing 50 filters
- Manual: 1 unit, Ref. 0034617
- Model: MS40
- Compatible with: Desoldering modules MV-A, MS-A, MVE-A, and MSE-A
Replacing Paper Filters
- Unscrew the filter cover from the desoldering module.
- Remove the old paper filters.
- Replace the worn filters with two new ones.
- Put the new filters in place and securely screw the filter cover back on.
Components
- Desoldering Module
- Paper Filters
- Filter Cover
- O-Ring Seal
Frequently Asked Questions
Q: How often should I replace the paper filters?
A: It is recommended to replace the paper filters whenever they appear worn or clogged to maintain optimal performance.
Q: Can the paper filters be cleaned and reused?
A: No, the paper filters are designed for single-use only.
Replace them with new filters as needed.
Documents / Resources
 |
JBC MS40 Paper Filters for Disordering Module [pdf] Instruction Manual MS40, MV-A, MS-A, MVE-A, MSE-A, MS40 Paper Filters For Disordering Module, MS40, Paper Filters For Disordering Module, For Disordering Module, Disordering Module |