Jansite T3 Android Navigation
Introduction
Please install various cables correctly according to the illustration.
Connection & Use
The radio is divided into those that require CANBUS and those that do not. The function of CANBUS is to make certain original car functions work normally, such as steering wheel control, original car camera and so on. Most original car radios only have the function of listening to the radio and do not need CANBUS without a display or an original camera. We will set up CANBUS before sending the machine. The buyer can plug and play when the machine is received. If there is a problem, the buyer can check and set CANBUS according to the CANBUS brand and model or send your CANBUS option interface to us. The common CANBUS brands are as follows:
Wiring Diagram
A
A:Audio / Video Connector
H
GPS
C:CANBUS Connector
D:USB(4 PIN)
E:USB(6 PIN)
F:Reverse Video Out
G:Main Power Cable
H:GPS
I: Radio
A1: AMP_POW (Amplifier control)
A2: GND (RCA_FL/RCA_FR)
A3: AUXIN_R (Right channel input)
A4: RCA_FL (Front left audio output)
A5: AUXIN_L (Left channel input)
A6: RCA_FR (Front right audio output)
A7: NC (Not used)
A8: GND (AUXIN_L/AUXIN_R)
A9: NC (Not used)
A10: GND (CVBS_IN2)
A11: NC (Not used)
A12: GND ground (CVBS_IN1/CVBS_OUT)
A13: NC (Not used)
A14: NC (Not used)
A15: NC (Not used)
A16: SUB subwoofer output
A17: CVBS_IN2 video input 2
A18: CVBS_IN1 video input 1
A19: MIC-microphone –
A20: MIC+ microphone +
D2: USB DPO USBO
D3: GND USB
D4: USB DNO USBO
E
E1: USB 5V
E2: USB DP1 USB1
E3: GND USB
E4: USB DN1 USB1
E5: USB DN2 USB2
E6: USB DP2 USB2
F
F1: TXD TPMS OBD
F2: NC (Not used)
F3: RXD TPMS OBD
F4: GND
F5: POW_5V(TPMS)
F6: CAM_CVBS(Reverse image)
F7: CAM_12V(Reverse image)
F8: CVBS_GND(Reverse image)
F9: PARK_IN(
Installation
1.1 Pinout diagram of the device connector
Pay attention to the correct wiring.
Improper connection may damage the device.
Ο Π
G
POWER
םך
A C D E F
ANT
1.2 Wiring Diagram
α ם
10 14 16 320
A102
02 246 8 10
C D E F
C D
C1: GND (AUXIN_L/AUXIN_R) D1: USB 5V
C2: POW 12V
C3: AUX2_L
C4: AUX2_R
C5: KEY_RST
C6: IPOD DET
C7: CAN_TXD(CANBUS)
C8: CAN_TXD(CANBUS)
A
A:Audio / Video Connector
H
GPS
C:CANBUS Connector
D:USB(4 PIN)
E:USB(6 PIN)
F:Reverse Video Out
G:Main Power Cable
H:GPS
I: Radio
A1: AMP_POW (Amplifier control)
A2: GND (RCA_FL/RCA_FR)
A3: AUXIN_R (Right channel input)
A4: RCA_FL (Front left audio output)
A5: AUXIN_L (Left channel input)
A6: RCA_FR (Front right audio output)
A7: NC (Not used)
A8: GND (AUXIN_L/AUXIN_R)
A9: NC (Not used)
A10: GND (CVBS_IN2)
A11: NC (Not used)
A12: GND ground (CVBS_IN1/CVBS_OUT)
A13: NC (Not used)
A14: NC (Not used)
A15: NC (Not used)
A16: SUB subwoofer output
A17: CVBS_IN2 video input 2
A18: CVBS_IN1 video input 1
A19: MIC-microphone –
A20: MIC+ microphone +
D2: USB DPO USBO
D3: GND USB
D4: USB DNO USBO
E
E1: USB 5V
E2: USB DP1 USB1
E3: GND USB
E4: USB DN1 USB1
E5: USB DN2 USB2
E6: USB DP2 USB2
F
F1: TXD TPMS OBD
F2: NC (Not used)
F3: RXD TPMS OBD
F4: GND
F5: POW_5V(TPMS)
F6: CAM_CVBS(Reverse image)
F7: CAM_12V(Reverse image)
F8: CVBS_GND(Reverse image)
F9: PARK_IN(Hand brake detection)
F10: GND
G: Main Power Cable
G1: GND
G2: B+ 12V
G3: ACC +12V
G4: ILL (Car headlights)
G5: Reverse Detection
G6: KEY 2
G7: KEY 1
G8: Automatic Antenna Power Supply
G9: FR-(Speaker Front Right)
G10: RL- (Speaker Rear Left)
G11: FR+ (Speaker Front Right)
G12: RL+ (Speaker Rear Left)
G13: FL+ (Speaker Front Left)
G14: RR+ (Speaker Rear Right)
G15: FL+ (Speaker Front Left)
G16: RR- (Speaker Rear Right)
-3-
☐
③ 679 13 15
②
4 6 8 10 12 14 16
G
1.3 Introduction on the back of the machine:
Please install various cables correctly according to the illustration.
Power Cable RCA Cable Radio GPS
POWER RADIO
GPS
CANBUS Connector USB(4PIN) USB(6PIN) Camera Input
-4-
1.4 CANBUS Connection & Use
The radio is divided into those that require CANBUS and those that do not. The
function of CANBUS is to make certain original car functions work normally, such
as steering wheel control, original car camera and so on.
Most original car radios only have the function of listening to the radio and do not
need CANBUS without a display or an original camera.
We will set up CANBUS before sending the machine. The buyer can plug and play
when the machine is received. If there is a problem, the buyer can check and set
CANBUS according to the CANBUS brand and model or send your CANBUS
option interface to us.
The common CANBUS brands are as follows: (20)
Hiwonld
威协议会
长城系列 Xinbas CC0211
H102И0040А
Raise HIW 15730706F 1D 80412182
H
Raise (RZC) Hiworld (HW) Xinbas (XBS) Binary (BNR) Simple soft (XP)
1.4.1 CANBUS wiring diagram (example model: Volkswagen)
睿志诚一大众车系
P/N:VW-RZ-08
SW: V0016 HW: VW-NC3
FOR 大众全兼容 (190709)
Raise CANBUS
Connect CANBUS
Connect Player
1.4.2 CANBUS settings (example model: Volkswagen)
Home OB/s 8:03 AM Settings
Settings
60% used-6.46 ARRRY
a
Security & location
Chrom Radi Music Video Bluetoot B
Users &accounts
Accessibility
BT Music Settings File Manager Play Store Maps
Screen reader
G Google &prefere
Car Settings
interface
Syster
1.Click “Settings” to enter the settings pag. 2.Enter “Car settings”.
-5-
OB/s 3:55 PM
Car Settings OB/s 3:5 Car Settings OB/s 3:57 PM
General
Display
Sound
Radio Region
Europe
Rear Mirror
Normal
SWC Type
Learning Type
General
000000 Display
1 2 3
Sound
4 5 6
Factory Enter SWC setting interface Factory
SWc 7 8 9
i Device Info i Device Info Shortcut Touch
Illumine Detect
ON
3.Click “Factory”
Car Settings OB/s 3:57 PM
General CarType Setting
Display CAN Related Settings
Sound
open log of car
Factory
Touch Learning
Device Info
Physical Learning
Mic Type
Internal Mic
5.Click “CarType Setting”.
Carinfo
Model:2:HONDA R03
OB/s8:02 AM
app update version:3.0.1
No Canbus Honda
Raise
SimpleSoft
Toyota/
Lexus
Hiworld
VW/Skoda/
Seat
Dogen PSA/DS
Oudi NISSAN
0M VW-SKODA_R01(07-10 Sagitar/05-11 Passat/07-10 Magotan/
10-12 Golf6/08-10 Bora/07-12 Octavia/07-10 Jetta/10-12 CC/08-10
Scirocco/11-18 Sagitar/11-17 Passat/11-16 Magotan/10-16 Tiguan/
11-18 Bora/08-18 Polo/13-18 CC/13-18 Santana/13-17 Gran Lavida/
14-17 Cross Lavida/08-15 Touran/16-18 TouranL/11-18 Jetta/13-14
Octavia/08-17 Eabia/14-18 Baoid/13-18 Banid/13-15 Superh/09-13 Octavia/08-17 Fabia/14-18 Rapid/13-18 Rapid/13-15 Superb/09-13
Superb/14-17 Yeti/14-18 Caravan/09-19 Multivan/12-18 Sharan/11-16
Scirocco/11-17 Touareg)
VW-SKODA_R02(08-10 Lavida/18-19 Lavida/19 Sagitar/19 Passat
7-19 Magotan/19 Tharu/17-19 TiguanL/14-19 Golf7/19 Bora/14-19
Lamando/19 Polo/19 CC/17-19 Teramont/19 T-Cross/19 Jetta/17-18
C-Trek/16-19 Sportsvan/19 T-Roc/19 Tayron/15-19 Octavia/19 Rapid/
6-18 Superb/18 Kamiq/18-19 Karoq/17-19 Kodiaq/16-18 Variant/19
Binary Chevrolet/
BUICK/OPEL
HuaChenY VW-SKODA_R03(14-19 Golf7 with AMP)
4. Enter password: 000000, click”✓”.
Carlnfo
Model:Others->CWEV23->CWEV23
No Canbus
Raise
SimpleSoft
Hiworld
Dogen
Oudi
Binary
HuaChenY
OB/s 3:57 PM
app update version:3.0.1
6.Click “Raise”(CANBUS Brand).
Carinfo中
Model:2:HONDA R03
OB/s 8:02 AM
app update version:3.0.1
VW/Skoda/
Seat
VW-SKODA_R01(07-10 Sagitar/05-11 Passat/07-10 Magotan/ 10-12 Golf6/08-10 Bora/07-12 Octavia/07-10 Jetta/10-12 CC/08-10
Scirocco/11-18 Sagitar/11-17 Passat/11-16 Magotan/10-16 Tiguan/ 11-18 Bora/08-18 Polo/13-18 CC/13-18 Santana/13-17 Gran Lavida/
14-17 Cross Lavida/08-15 Touran/16-18 TouranL/11-18 Jetta/13-14
Octavia/08-17 Fabia/14-18 Rapid/13-18 Rapid/13-15 Superb/09-13
Superb/14-17 Yeti/14-18 Caravan/09-19 Multivan/12-18 Sharan/11-1
Scirocco/11-17 Touareg)
No Canbus Honda
Raise Toyota/
Lexus
SimpleSoft
Hiworld
Dogen PSA/DS
Oudi NISSAN
Binary Chevrolet/
BUICK/OPEL
HuaChenY VW-SKODA_R03(14-19 Golf7 with AMP)
VW-SKODA_R02(08-10 Lavida/18-19 Lavida/19 Sagitar/19 Pass. -SKODA R02(08 -19 L /19 Passa
17-19 Magotan/19 Tharu/17-19 TiguanL/14-19 Golf7/19 Bora/14-19
Lamando/19 Polo/19 CC/17-19 Teramont/19 T-Cross/19 Jetta/17-18
C-Trek/16-19 Sportsvan/19 T-Roc/19 Tayron/15-19 Octavia/19 Rapid/
16-18 Superb/18 Kamiq/18-19 Karoq/17-19 Kodiaq/16-18 Variant/19
Jetta VS5)
7.Click “VW/Skoda/Seat”(Car Brand). 8. Click “VW-SKODA_R01″(Car year and model).
Carinfo+ OB/s 3:58 PM Car Settings OB/s 3:58 PM
Model:Others->CWEV23->CWEV23 app update version:3.0.1 General CarType Setting
No Canbus Honda TOYOTA_R01(14-19, 21 Levin(Support Hybrid)/12-17 Camry/09-13
Reiz/18 CHR/18 IZOA/15-18 Highlander/13-15 RAV4/13-18 Corolla/12
Camry/15-18 Hilux) Display
Raise ota/ CAN Related Settings
Lex
SimpleSoft Carinfo
VW/S
lo with 360/15-18 Sie
th 360 TW/19 RAV4 wit
ith 360 TW)
Sound
open log of car
Hiworld Seat Are y choose this model?
Factory
Dogen PSA/I Touch Learning
Oudi NISSAN Device Info
TOYOTA R05(Prado high level) Physical Learning
Binary Chevrolet/
BUICK/OPEL
TOYOTA R06(19 Asia Lexus RX300/Big Overlord/Elfa/Land
Cruiser LC100) Mic Type
HuaChenY Internal Mic
9. Click “OK”. 10. The setting is successful.
-6-
1.4.3 Вoot logo settings (example model: Volkswagen)
Car Settings OB/s 08:01 Logo Setup 中
General
AV Output Range
☑ Display
Screen adjustment
Sound
Logo Setting
Factory
Dedicated logo settings Device Info KIA
regain the default boot animation >
Front Switch
1.Click “Logo Setting”.
OB/s 08:01
Ford Jeep
2.Click the icon to set successfully
1.5 How to connect the rear camera?
If you need to install a rear camera, please connect as shown below.
is connected to the reversing trigger line (G5);
2and 3 are connected to the backup light “+”;
4 connected to the backup light “-“.
Rear camera control
connect to G5(BACK)
4
1
3
-7-
2
GND
This is the connection principle of the rear camera. In most cases, it can be completed
by directly connecting Back (Reverse) trigger line.
1.5.1 How does the reverse line appear?
A: Settings–Car settings–General–Reverse Line.
1.6 How the buttons on the steering wheel work?
A:If your order is not include canbus, Please go to Steering Learning – follow the
instructions to complete the steering learn.
Steering wheel learning steps:
1) Press any button on the steering wheel, the interface will display, please press
and hold a direction button. If you do not press the button on the steering wheel
within a certain period of time, the learning will fail.
2) Click on the screen to learn the function of docking.
3) Press the corresponding function button on the steering wheel.
Repeat the operation until all the control buttons on the steering wheel have
been learned.
Please refer this video:
TXZ OB/s 08:01
Radio Region General
Europe
Display
Sound
Factory
Device Info
ar Mirror
Normal
SWC Type
Learning Tyре
Enter SWC setting interface
SWC
Shortcut Touch
OFF
Illumine Detect
ON
1.Click “Enter SWC setting interface”.
SWC OB/s 08:01
Power Mute
K
Previous
Do
Next Volume- Volume+ Home
SRC
Play/Pause HangUp Answer SRC Band Back Shuffle
Repeat EQ Navi AUX
Notice: Each button has the function of long and short pressing. Please pay attention to distinguishing when learning.!!
Short Press Learning Represent long press learning
SWC1(1K) Reset
2.Click “START” to start the setting.
B:If your order includes canbus, please go to the Setting > Car settings >
Factory > Password :000000 > Model choose > Chose your car model
and save it.
-8-
1.7 How to adjust the car door direction?
Car Home OB/s 3:55 PM
Ukm
3:55 PM
Nov 1, 2021
87.50 UNKNOW
FM
Car Home OB/s 3:55 PM
3:55 PM
Nov 1, 2021
87.50 UNKNOW
a FM
The default display is the left driving position. If your car is the right driving position,
please set it according to the following steps.
(Only the high-end car models that support CANBUS will show the car information,
please ignore this information for other low-end car models)
Home OB/s 8:03 AM Settings
Settings
60% used-6.46 GB free
a
Security & locat
Chrome Radio Music Video Bluetooth Users & accounts
*
BT Music Settings File Manager Play Store Maps
T
Accessibility Accessibility
G
Google
Services & prefer
Car Setings
System
OB/s 5:40 PM
1.Click “Settings” to enter the settings pag. 2.Click “Car settings”.
Car Settings OB/s 3:57 PM Car Settings OB/s 10:14
General General CarType Setting
000000 Display Display CAN Related Settings
1 2 3
Sound
open log of car
4 5 6
Factory Factory
Touch Learning
7 8 9
Device Info Device Info
Physical Learning
Mic Type
Internal Mic
3.Click “Factory”, Enter password: 000000. 4.Click “CAN Related Settings”
Carlinfo OB/s 10:14 Carinfo.
radar display default front left door
air temperature right left reverse Close front right door
display air ctrl in float button Close rear left door
park radar default rear right door
Voice control air conditioner(Only
Support Special CarTyре)
Close front
close right video function
rear
Close
CAN key mapping
doop maр
5.Click “doop map”.
Reset
6.Set door information.
-9-
OB/s 10:14
1.8 How to set up Shortcut Touch?
Home OB/s 8:03 AM Settings
Settings
60% used – 6.46 GB free
a Security & location
Chrome Radio Music Video Bluetooth 日
Users & accounts
Current user:
*
BT Music Settings File Manager Play Store Maps
1.Click “Settings” to enter the settings pag.
Car Settings
Radio Region General
Europe
Display
Sound
Rear Mirror
Normal
SWC Typе
Learning Type
Factory Enter SWC setting interface
SW
Device Info Shortcut Touch
Illumine Detect
ON
OB/s8:32 AM
G
Accessibility
Googl
Services & preferences
Car Settin
System
OB/s 5:40 PM
2.Click “Car settings”.
Car Settings OB/s 8:32 AM
Radio Region General
Europe
C Display Rear Mirror
Sound SWC Type
Learning Type
o
Factory Enter SWC setting interface
i Device Info Shortcut Touch
Illumine Detect
ON
3.Click “General”. 4.Click “Shortcut Touch”.
1.9 Can’t turn off the DVD when my car is shut down?
A. Some car models do not completely cut off the power after turning off the
engine. You need to open the door and then close the door to completely
disconnect the power.
B. For Volkswagen cars (including Skoda), you need to do the following:
1
Disconnect
If you receive this power cable, please disconnect
the place marked by the red circle, and the
problem will be solved.
2
Connect
高配
S
If you received this power cord, please connect the place marked with a red circle (the label is
“高配”), and the problem will be solved.
-10-
1.10 Install USB DVR
If you purchased our USB DVR, please follow these steps:
Car Hom
3:55 PM
Nov 1, 2021
87.50
1. Connect DVR to Android Player by USB port.
Home 中 OB/s 2:02 PM File Manager OB/s 2:03 PM 5
USB driv Q
Android
T.DIR
Chrome Radic Video Bluetooth
Size 300.0 KB
r.apk
2. Click “File Manager”.
Home
O
HD DVR
4. Open the apk.
G
3. Click on “DVR.apk” to install.
OB/s 2:07 PM
41
2021/11/01 08:45:33
5. Start your experience!
Newest APP download URL:
https://drive.google.com/file/d/1kDif7P199OQJopwFJbBFKZOTZHB-YtH1/
view?usp=sharing
-11-
1.11 Install USB TPMS
If you purchased our USB TPMS, please follow these steps:
FL
1. Install sensors.
Car Ho
3:55 PM
Nov 1,2021
87.5
3:55
3:55 PM
2. Connect receiver to DVD by USB port.
Home 中國 OB/s 2:07 PM
0=
Chrome Radio Music Video luetooth
BT Music Settings File Manager Play Store Maps
3. Connect U-disk to DVD by USB port. 4. Click “File Manager”.
File Manager OB/s 2:09 PM
Q
Home OB/s 2:10 PM
System Volume Inforn
■ 最新版本兼容android10 new.apk
p-release-1.1.47.apk
Size3.4: app-release解决重复弹框.apk
TPMS-鼎威方案专用190718.apk
S_K03 (老版本).ap
Installation video(安装视频).mp4 10.69 MB
安装注意.txt
HD DVR TPMS
5. Click on “android10 new.apk” to install. 6. APP install success.
TPMS
0.00Bar
28°C
Leaking…
0.00Bar
28°C
Low press.
OB/s 2:10 PM
ID code pair TPMS setup
7. Use interface.
Car Home OB/s 2:10 PM
FL tire:Leaking…
0km/b
0.00Bar
27°C
Leaking…
2:10 PM 2.37Bar
28°C
Normal
Nov 1, 2021
a
K
87.50 UNKNOW
FM
8. Pop-up warning display.
-12-
2. Basic operation
2.1 Turning On and Turning Off
Turning On
Turning Off
When you insert the key and turn on the car’s ACC power,
the device will automatically turn on and display the startup
animation LOGO.
When you remove the key and turn off the car’s ACC power,
the device will automatically shut down.
2.2 Panel Function Button
3
2
ORST
3
4
5
6 4
7
MIC Bluetooth call sound input 2 RST Click the reset button to reset
the system and restart
ان Short press: mute Back to Home page
Long press: sleep mode
Return to the previous interface 6 volume +
수 volume –
-13-
2.3 Tips for Using Touch Screen
When using the touch screen, you can operate the device in the following ways:
2.3.1 Clicking Function
You can select an app icon or option in the display by using the tap function. As in
the screen, tap Bluetooth to enter the Bluetooth application.
2.3.2 Pressing Function
You can tap and hold the function, tap and hold the current operation interface, icon or
input field for more operation options. For example: Tap and hold a blank area on the
main interface, a pop-up menu will open at this time, and you can erform some options
on the menu.
2.3.3 Dragging Function
Swipe the touch screen or tap and hold the scroll bar, then swipe up or down. For example:
Use the swipe function when browsing the Bluetooth phonebook contact list.
2.3.4 Zooming Function
When you view a picture on your device, double-tap the screen to zoom in or out,
or you can use two fingers to tap and hold the screen, then slide the distance
between your fingers to zoom in or out.
Clicking Pressing Dragging Zooming
-14-
3. Function operation
3.1 Basic Settings
3.1.1 User Defined Home Screen
This device does not have a replaceable main interface. You can download
Car Launcher. AGAMA Car Launcher can be used for free:
8 1:17 +13° +
RADIO
NISSAN
NAVI
PHONE
INTERNET
понедельник
20 мая 2019
MUSIC APPS
Music Player
No name
Here is the APP download link: https://drive.google.com/file/d/1MiystfaAYuCmE
c8QyeovRwA47YIGcbzF/view?usp=sharing
3.1.2 Setting Wallpaper
Tap and hold a blank space on the home screen > Wallpaper > Wallpaper or
Gallery > After selecting your favorite wallpaper, tap Set Wallpaper; or select
a picture in the gallery and tap Save.
3.1.3 Widget
Widgets > Select a widget > Long press to drag to the main page.
-15-
3.2 General
3.2.1 Steering Wheel
The user can set the steering wheel according to the prompts.
Note: The square control interface is only for cars with buttons on the steering wheel,
but some cars cannot learn the steering wheel buttons, For example, olkswagen,
Skoda, etc. are implemented through CANBUS.
Please refer to the video for steering wheel learning:
3.2.2 Screen Calibration
Please use five fingers pressing on the screen at the same time. It will appear 4
points, click on the red point until the learning success. Then enter to learning the
touch button.
Refer to video: https://drive.google.com/file/d/1|IQRobDu74DGBuPZBsPwP61м
_EOW-_gu/view?usp=sharing
3.2.3 Navigation application
Select the corresponding map application to associate the navigation application
icon on the main interfacе:
Open Settings > Car settings > General> Set the associated navigation program.
Car Settings 中 OB/s 8:29 AM
General Dynamic reversing auxiliary line switch
OFF
Display Set the associated navigation program
High definition recorder
com.fvsm.camera Sound
G Maps erted? com.google.android.apps.maps
Factory HD DVR Ο
com.ankai.cardvr
IGO iGO Navigation
Device Info com.nng.igo.primong.igoworld
300ms
Device Info
Show the device info
-16-
3.2.4 Language
If you need to change the language, follow these steps:
Home OB/s 8:03 AM a Settings
Settings
60% used-6.43G A11 이 * Security & location
Device only
Chrome Radio Music Video Bluetooth
BT Music File Manager Play Store Maps
1.Click “Settings”.
System OB/s 9:05 AM
Syster
Languages & input
O
Date & time
ard Tim
About Car
TOYOTA ROS
3.Click “Language & input”.
Language preferences
English (United States)
简体中文(中国)
Add a languagе
5.Click “Add a language”.
Русский
Молдова
OB/s 08:44
OB/s 08:48
ㅁ
Accessibility
G Services &
Car Settings
System
2.Click “System”.
Settings
Languages & input
Langua
Physical keyboard
Advanced
OB/s 9:05 AM
OB/s 9:05 AM
4.Click “Language”.
5 Settings中 OB/s 08:46
Add a language Q
Нохчийн
сский
Српски (пирилица)
6.Select the language you need.
中 OB/s 08:47
Language preferences
English (United States
简体中文(中国)
Русский (Россия) Настройки
Add a language Выбор языка
Русский (Россия)
English (United States)
7.Select your country. 8.Long press the language and move up to 1th.
-17-
3.2.5 Factory settings
When the system is unavailable or a problem occurs after the user’s operation, the
system cannot be used normally, you can restore the factory settings. Restoring the
factory settings of the system will delete the third-party software, and the current
system settings will be lost. The navigation software only needs to reinstall the
corresponding APK. Users should exercise caution.
Home OB/s 8:03 AM
ΔBRR
Chrome Radio Music Video Bluetooth
A
Settings
Settings
60% used-6.43 GB free
Security & location
Deviceonly
Users & accounts
OB/s 9:05 AM
Play Maps
Accessibility
G
Google
Car Settings
Sys
1.Click “Settings”. 2.Click “Car settings”.
Car Settings OB/s 9:10 AM Car Settings OB/s 08:51
Voice Control General General
Display
Voice Control
OFF
USB Setting
a
i
Display USB Setting
Sound illumination color
Factory Audio AMP
Device Info
Generate QR Code
s
Sound Reset?
nation and downloaded apps? You
100 Factory 100
Device Info
Generate QR Code
Erase all data (factory reset) > Erase all data (factory reset)
3.Click “Erase all data(factory reset)”. 4.click “OK” and wait for the system to restart.
3.2.6 Split screen
Split screen function can display two apps at the same time, please follow the steps below:
Reference video: https://drive.google.com/file/d/1QI0nSW_GiMhN167Q80RU-atasIC5B9f
M/view?usp=sharing
Car Home OB/s 8:03 AM
8:03 AM
Nov 1, 2021
87.50 UNKNOW
FM
Overview.
iGO Navigation
Video
OB/s 8:14 AM
2.Hold one of the apps and drag it to the left
or right prompt position.
1.Click the icon to bring up all running apps.
-18-
D
iGO Navigation OB/s 8:14 AM iGO Navigation OB/s 8:14 AM
ryusov pereulok usov pereulok
3.After entering split screen state, we gently
tap (note that it is a click, not a drag) another
app to let it automatically fill the other half of
the screen.
Video OB/s 8:14 AM
Food.avi
4. In split screen state, you can drag the white
bar in the middle to adjust the left and right
screen ratios.
0:01:
4:3
5. If you want to exit split screen, operation
method is: hold down one of the apps, drag
it all the way to the edge of the other side of
screen, and then let go.
3.2.7 Float video settings
Float video function can make the video top the other apps. Setting steps:
Reference video: https://drive.google.com/file/d/18xEGlejHVp4eZubF3vqlUZmAeTUi32U
b/view?usp=sharing
Home OB/s 8:03 AM Settings 中國 OB/s 9:05 AM
Settings
60% used-6.43 GB free
a
Security & location
Chrome Radio Music Vided luetoot Users & accounts
BT Music Settings File Manager Play Store Maps
t
Accessibility
G Google
Services & preferences
Car Settings
System
Language
1.Click “Settings” to enter the settings pag. 2.Click “Car settings”.
-19-
Car Settings4
General
OB/s 3:5 rSettings OB/s 8:01 AM
General Real-time network speed
ON
◉ 000000 Display Display Speed Unit
1 2 3
km
Sound Sound
Video Player
4 5 6 Normal Factory Factory
7 8 9
Device Info Device Info
Player USB compatibility enhancement
OFF
External Devices
0
3.Click “Factory”, Enter password: 000000.
Car Settings OB/s 8:02 AM
General Real-time network speed
ON
Display
Sound
Factory
Device Info
Video Player
Normal
Background
Pip
External Dev
None
IR Devices
5.Click “Pip”.
0:00:13
Vide
1/1
7. Click “НOMЕ” button.
OB/s
Food.avi
9:56 AM
IR Devices
4.Click “Video Player”.
Video OB/s 9:56 AM
1/1 Food.avi
0:00:13
6. Play a video.
Avenue Victor
Pont au Chang
Rue de Turbigo
…. Looking for GPS signal..
aux Our
t-Denis
eSébastopol
it-Martin
Voie Georges Pompido
Rue
0:01:59
Rue de Montmorency
Rue Rambuteau
Simon le Franc
Rue de la Verrerie
Rue de Rivoli
8. Video is top on any interface. Click return
button above video to exit.
3.2.8 When I play a video, the screen displays “Driving please pay attention
to safety!”?
Video OB/s 8:49 AM
Driving,please pay attention to safety!
Home OB/s 8:03 AM
Chrome Radio Video Bluetooth
☑
BT Music Settings File Manager Play Store Maps
1.When this happens when opening the video. 2.Click “Settings” to enter the settings pag.
-20-
G
Settings OB/s 9:05 AM Car Settings OB/s 8:28 AM
Settings
60% used -6.43 GB fr
General
Shortcut Touch
ocation Display OFF
Illumine Detect
Users & accounts
cessibility
Sound
Can watch video while drive
Factory
Google
Services & preferences
Car
Dynamic reversing auxiliary line switch Device Info OFF
Systen
3.Click “Car settings”.
Car Settings
SWc General
Shortcut Touc
Display
Illumine Detect
Sound
Can watch video while drive
Factory ON
Device Info OFF
OB/s
Dynamic reversing auxiliary line switch
Reverse Line
Autoplay Music
*
Reverse Lin
ON
Autoplay Music
4.Click “General”.
8:28 AM Video
5.Click “Can watch video while drive”.
4:3
6.The ban was lifted.
OB/s 8:14 AM
Food.avi
3.3 Navigation
You can download and install your favorite navigation application. Here are a
navigation applications and download links we provide:
S
IGO MАР:
IGO https://drive.google.com/drive/folders/1TiBpxFYRwcRpLPaE_VVLMNMR
K5A3-oXJ?usp=sharing
-21-
3.4 Radio
Radio
R-D-S AF TP TA
D
87.50
OB/s 9:57 AM
None
FM1 87.50 MHz DD
108.00
P1 87.50 MHz P2 90.10 MHz P3 98.10 MHz
P4 106.10 MHz P5 108.00 MHz P6 87.50 MHz
シ
3.4.1 Function Description
The functions of the icon buttons in the radio interface are described below:
Icon Button name Function Description
Main Menu Click to go back to main interface.
Auto Search
Search Channel
Forwards
Search Channel
Backwards
FM/AM
Switching
Scans and stores radio stations automatically.
Click to search channel forwards then stop when find
strong and clear channel.
Click to search channel backwards then stop when find
strong and clear channel.
5 Click to switch FM/AM.
Audio switch Click to mute/turn on sound.
Back Click to go back to last interface.
会
Forward tuning Forward tuning radio
Back tuning Back tuning radio
R-D-S RDS Click to open RDS related functions.
-22-
3.4.2 Select radio region
In order to have a better radio effect, please set radio area:
Home OB/s 8:03 AM
o
a
Chrome Radio Music Video Bluetooth
Settings File Manager Play Store Maps
G
Settings
Settings
Security & location Device only
Users &accounts
Accessibility
Google
Car Settings
The car setting
Langouges,time, reset, update 1.Click “Settings” to enter the settings pag. 2.Click “Car settings”.
Car Settings OB/s 1:57 PM Car Settings
Radio Region Radio Region General > Generа
Europe
Display Rear Mirror
Normal
SWC Type
Learning Type
Display Radio Region Setting
USA
Sound
Europe
Factory Enter SWC setting interface
i Device Info
Factory Latin
Device Info Eastern Europe
Shortcut Touch
OFF
Illumine Detect
OFF
Illumine Deted
NO
3.Click “Radio Region”. 4.Select radio region.
OB/s 3:55 PM S
OB/s 1:57 PM
3.4.3 Problems you may encounter?
The signal is not good:
Some models of the radio signal amplifier are in the original radio, and some models are in the radio
antenna. If your car radio signal amplifier is in the original radio, then you need to install an additional
signal amplifier to make the radio work properly. Also check your Antenna connection.
Please note: Volkswagen has a dual antenna interface (Figure 1), only one of the radio antenna interfaces
needs to be connected. Very few buyers have a bad connection to one antenna interface, so you need to
buy a dual antenna adapter (Figure 2). This machine does not include a dual antenna adapter.
-23-
4. Trouble handle
Android Player Guide Video URL:
https://drive.google.com/drive/folders/1aPYYUEIheXW-14-Dc2JCfTxueDjEsbhM?usp=sharing
Note:
If you encounter the following problems during use, the troubleshooting wizard will help you solve
the problem quickly. If the problem is still not solved, please contact the professional or contact us.
Do not open the machine yourself to avoid serious consequences!
Q: Why can’t I boot?
A: If you can’t start, please rest assured, our machine will be tested before sending, usually the
power connection problem, please follow the steps below to solve the problem.
1. The condition for the radio to turn on is that ACC (G3) and 12V (G2) are connected to the
positive pole of the car’s 12V power supply, and G1 is connected to the negative pole of the
power supply. It is unlikely that the power cord may not match your car. You can directly
connect these 3 power cords to check whether it is the power cord or the machine problem.
2. It may be that the cable of the radio has fallen off during transportation, just open the back
cover to check and reconnect the cable inside the radio.
3. If the power cannot be turned on after following the above steps, please send us a video for
confirmation. The video needs to show that the power cord is properly connected, and the
connection cord is tested to 12V with an electric meter.
Q: Why doesn’t GPS work?
A: Please check the following information first:
1. Please check if the GPS module is tightened.
2. Please click GPS monitoring to view the number of stars searched (normally display more
than 3 green stars).
3. Please put the GPS module on the A pillar of the car.
4. Other electronic devices in the car will also interfere with GPS signals, please turn them off first.
There is a small amount of GPS interference that cannot work normally. You can send me a picture
for confirmation. After confirmation, I will send you a new GPS module.
Q: Why does the Bluetooth connection fail?
Please turn on bluetooth of the phone, and then search for the device name on the phone.
1. Please check if the video input cable is plugged in. The two short blue cables are the receiving
signals of Bluetooth and WiFi.
2. Please ignore the connected devices on your phone and reconnect.
3. Please try to connect with another phone.
Q: Why does the left button light not light up?
A: Check if G4 on the power cord is connected to ACC.
Q: How to proofread the guide buttons?
A: Settings–Car settings–Factory(000000)–Touch Learning,
Follow the instructions on thepage.
-24-
Q: Boot logo setting?
A: Settings–Car settings–Factory(000000)–LOGO setting (Support custom startup picture)
Q: Why is there no original car setting when CANBUS is included, or the original car has
abnormal functions?
A: Need to connect the machine to the network to update the CANBUS library, check or reset CANBUS.
Q: How to wire Outlander 2 2005-2011/Lancer 2007-2013 with Rockford amplifier:
A1: If you have an RCA cable, please connect the RCAAMP CTRL cable and AMP CONT cable
together, and the sound will work normally. Please refer to the figure below,
AMP-CTRL
AMP CONT
A2: If there is no RCA cable, please find the AMP CTRL cable and connect it to the ACC cable (red),
just remove the plastic and it will not cut. Please refer to the figure below,
ACC (Red cable)
AMP-CTRL
-25-
5. Hot product for this machine
USB ADAS Car DVR For Android
ADAS Plus Make Driving Safer
Floating window function
Easy to install
(Gift)
USB TPMS For Android
– Temperature monitoring
– Pressure monitoring
– Pop-up warning
HD Rear Camera
Night Vision
– Waterproof
Documents / Resources
 | T3 Android Navigation |
References
- User Manualmanual.tools