Jansite 588 Tire Pressure Monitoring System
INTRODUCTION
With the Jansite 588 Tire Pressure Monitoring System, you can keep an eye on your tires and make sure they are safe and working well. This method gives drivers real-time readings of their tire pressure, so they can always keep an eye on their tires’ health. The Jansite name is known for making reliable car parts, and the 588 model has sensors that give accurate data. It has a pressure range of 1.5-6.0 Bar (22-87 PSI) and a resolution of ±0.1 Bar. The product was first released on October 21, 2020, and costs $29.99, making it a cheap but necessary tool for your car. The monitors in the system have batteries that can be replaced every two years, and the system is made to work well in temperatures from -22°F to 80°F (-22°F to 176°F). This system makes sure you can always drive with confidence, whether you own a car, drive a truck, or just want to quickly keep your tire pressure at the right level.
SPECIFICATIONS
| Brand | Jansite |
| Material | Acrylonitrile Butadiene Styrene |
| Price | $29.99 |
| Receiver Voltage | 5V |
| Receiver Working Temperature | -20℃ to 80℃ / -4℉ to 176℉ |
| Receiver RF Transmission Frequency | 433.92 MHz ± 50 KHz |
| Sensor Battery Life | 2 Years, replaceable |
| Sensor Working Temperature | -30℃ to 80℃ / -22℉ to 176℉ |
| Sensor Voltage | 2.1-3.6V |
| Pressure Range | 1.5-6.0 Bar / 22-87 PSI |
| Pressure Resolution | ±0.1 Bar / ±1.45 PSI |
| Package Dimensions | 5.55 x 5.35 x 1.93 inches |
| Weight | 0.18 ounces |
| Item Model Number | 588 |
| Batteries | 5 Lithium Polymer batteries required |
| Date First Available | October 21, 2020 |
| Manufacturer | Jansite |
WHAT’S IN THE BOX
- Tire Pressure Monitoring System
- User Guide
PRODUCT OVERVIEW
FEATURES
- Real-Time Monitoring: The TPMS keeps an eye on the temperature and pressure of the tires all the time, making sure that driving is safe.
- Six Different Types of Alarms: Loud beeps for fast air leakage, slow air leakage, high pressure, high temperature, sensor failure, and sensor battery low.
- Solar and USB Charging: It can be charged by the sun or via a USB cable, so you don’t have to use your car’s cigarette lighter to keep it running.
- Waterproof and Durable Sensors: The system comes with 4 IP67 waterproof sensors that keep it safe from rain, snow, and dust.
- Wide Compatibility: It works with a pressure range of 22 to 87 PSI (1.5 to 6.0 Bar), so it can be used on most cars, SUVs, MPVs, and RVs.
- Wireless Transmission: Uses wireless technology to send signals between the sensors and the computer, so there’s no need for complicated wiring.
- Vibration Sensing: When the system senses movements, it turns on automatically and goes into sleep mode when not in use to save power.
- LCD Digital Display: The wide-angle LCD screen shows data clearly and can be read. It also has a flash that makes it easy to see at night or during the day.
- Temperature and Pressure Units: On the screen, you can change between PSI/Bar for pressure and C/F for temperature.
- Easy to Install: It’s quick and simple to install, and you don’t even have to take the tires off. It usually only takes 5 minutes.
- Long Battery Life: The batteries in each sensor can be replaced after two years, so they can be used for a long time without needing to be serviced often.
- Temperature Range: The system works well in a wide range of temperatures, from -22°F to 176°F (-30°C to 80°C) for the sensors and -4°F to 176°F (-20°C to 80°C) for the receiver.
- Removable Stand: The updated removable stand makes it easy to take the monitor off to charge it or set it up.
- Maximum Working Distance: The receiver can work up to 19.7 feet away, which is far enough for most transportation.
- Visible and Auditory Alerts: It has both visible (screen alerts) and audible (buzzer) alarms to let you know right away if there are any problems with the tires.
SETUP GUIDE
- Put the Sensors in Place: Attach the four IP67 waterproof sensors to the ends of the tire valves.
- Place the Monitor: The monitor should be placed on the windshield or center panel so that it is easy to see and doesn’t get in the way of your view.
- Power the System: Make sure the battery is fully charged before using the system by charging it in the sun or via USB.
- Install the Monitor Stand: Attach the stand that can be taken off to the monitor if you want to use it for easy access and take it off to charge.
- Turn on the Sensors: Once the sensors are set up, they will start sending data to the receiver on their own.
- Click on Pressure Units: On the monitor, change the pressure unit to either PSI or Bar, based on your choice.
- Choose the Units of Temperature: Change the standard of measure to Celsius (°C) or Fahrenheit (°F).
- Set Alarm Values: Set the high and low pressure alarm values to match the appropriate tire pressure for your vehicle.
- Place the Receiver: Use the stand that comes with the receiver or, if necessary, glue to attach it to the windshield or center console.
- Check Sensor Communication: Make sure the sensors are talking to the monitor properly by making sure real-time data is shown.
- Test the System: Once the system is set up, make sure it lets you know when the temperature or tire pressure changes by simulating bad situations.
- Change the Sensor Settings: If you need to, you can change the sensor settings by moving the sensors or recalibrating the pressure units.
- Make Sure It Fits Right: Make sure the sensors are firmly attached to the stems of the tire valves and that there are no leaks.
- Start Using: Once everything is set up, check your tire pressure often to make sure the system is giving you correct real-time information.
CARE & MAINTENANCE
- Clean the Sensors: The sensors should be cleaned every time they are used to get rid of any dirt or dust that might affect how well they work.
- Check for Leaks: Use soapy water to check for air leaks around the sensor lines on a regular basis to make sure no air is escaping.
- Replace Sensor Batteries: The batteries in the sensors last for two years. When they start to lose power, you should replace them.
- Check the System Often: The antenna and sensors should be checked often for damage or signs of wear.
- Keep in a Dry Place: The receiver and sensors should be kept in a dry place when they are not in use to protect them from damage from the surroundings.
- Check Signal Range: Make sure the receiver’s signal range is right by making sure the monitor can get data from all sensors.
- Watch the Charging: Make sure nothing gets in the way of the solar panels and that the USB charging port stays working.
- Avoid Too Much Sunshine: Since the system is charged by sunshine, don’t leave it in direct sunlight for long periods of time. This can damage the solar panel or other parts inside.
- Protect from High and Low Temperatures: For best performance, store the system between -22°F and 176°F (-30°C and 80°C).
- Make Sure the Monitor Is Placed Correctly: Make sure the monitor is placed correctly on the windshield or console on a regular basis to get the best view.
- Test Alarm Settings: Check the system’s alarm settings every so often to make sure they are working right.
- Replace Worn Sensors: If any sensors show signs of damage, you should replace them right away to keep the accuracy.
- Use the QR Code on the Manual: Use the QR code on the manual to see if there are any system updates or new directions that might make the manual work better.
- Charge Often: Even if the sun power seems to be enough, charge the monitor system often to make sure it’s always ready to use.
- Avoid Impact: Be careful not to drop the receiver or sensors, as hits can damage their parts and make the system less effective.
TROUBLESHOOTING
| Issue | Solution |
|---|---|
| The system not turning on | Check and replace the batteries in both the receiver and sensors. |
| Inaccurate readings | Ensure the sensor is correctly installed and properly calibrated. |
| The receiver not receiving a signal | Check the sensor battery and ensure it is correctly installed. |
| Pressure readings fluctuate | Ensure that the sensor nozzle is properly sealed on the valve stem. |
| Low battery warning | Replace the sensor battery and ensure proper battery connection. |
| The system shows no signal | Make sure the sensor and receiver are within range (433.92 MHz). |
| The receiver display is blank | Reset the receiver by turning it off and on again. |
| Inconsistent pressure readings | Reinstall the sensor and ensure it’s securely connected. |
| Pressure readings are too low | Check for any leaks in the valve stem or defective sensor. |
| The system is showing ‘Error’ messages | Restart the system by turning off and on again to reset. |
| The receiver turns off automatically | Check if automatic shutoff is activated or replace the receiver’s battery. |
| The sensor doesn’t display the temperature | Ensure that the sensor is within the operating temperature range. |
| Noisy sensor | Clean the sensor valve to remove any dirt or debris. |
| Unable to switch between units | Press the unit switch to toggle between PSI, BAR, and KPA. |
| Not receiving accurate tire pressure | Ensure that the sensor is positioned correctly on the tire valve. |
PROS & CONS
PROS:
- Accurate readings with a wide pressure range of 1.5-6.0 Bar / 22-87 PSI.
- Real-time monitoring helps prevent under-inflation and tire blowouts.
- 2-year sensor battery life, which is replaceable for long-term use.
- Works in extreme temperatures (-30℃ to 80℃), ideal for various climates.
- Affordable price point of $29.99 for a reliable tire pressure monitoring system.
CONS:
- Requires 5 Lithium Polymer batteries, adding to the maintenance cost.
- The receiver’s RF transmission frequency could have more stability in high-interference areas.
- Sensor installation can be tricky for first-time users.
- The system may not be compatible with certain vehicle types or tire models.
- The limited warranty might not cover damage from misuse or accidents.
WARRANTY
The Jansite 588 Tire Pressure Monitoring System comes with a 1-year warranty from the manufacturer. This warranty covers any defects in materials and craftsmanship under normal use. If you experience any issues related to manufacturing defects, Jansite will provide a replacement or refund within the warranty period. To ensure that you can avail the warranty, it is recommended to keep the original purchase receipt and any proof of purchase.
FREQUENTLY ASKED QUESTIONS
What is the price of the Jansite 588 Tire Pressure Monitoring System?
The Jansite 588 Tire Pressure Monitoring System is priced at $29.99, providing an affordable solution for monitoring tire pressure.
What material is the Jansite 588 Tire Pressure Monitoring System made from?
The Jansite 588 Tire Pressure Monitoring System is made from Acrylonitrile Butadiene Styrene (ABS), which ensures durability and resistance to wear.
What is the receiver voltage for the Jansite 588 Tire Pressure Monitoring System?
The Jansite 588 Tire Pressure Monitoring System operates with a 5V receiver voltage.
What is the working temperature range of the receiver in the Jansite 588 Tire Pressure Monitoring System?
The Jansite 588 Tire Pressure Monitoring System receiver works within a temperature range of -20℃ to 80℃ (or -4℉ to 176℉).
What is the frequency at which the receiver of the Jansite 588 Tire Pressure Monitoring System transmits RF signals?
The receiver of the Jansite 588 Tire Pressure Monitoring System transmits RF signals at 433.92 MHz ± 50 KHz.
What is the battery life of the sensors in the Jansite 588 Tire Pressure Monitoring System?
The sensors in the Jansite 588 Tire Pressure Monitoring System have a battery life of 2 years, and the batteries are replaceable.
What is the working temperature range of the sensors in the Jansite 588 Tire Pressure Monitoring System?
The Jansite 588 Tire Pressure Monitoring System sensors work within a temperature range of -30℃ to 80℃ (or -22℉ to 176℉).
What is the sensor voltage for the Jansite 588 Tire Pressure Monitoring System?
The Jansite 588 Tire Pressure Monitoring System sensors operate with a sensor voltage range of 2.1-3.6V.
What is the pressure range of the Jansite 588 Tire Pressure Monitoring System sensors?
The Jansite 588 Tire Pressure Monitoring System sensors have a pressure range of 1.5-6.0 Bar (or 22-87 PSI).
What is the pressure resolution of the Jansite 588 Tire Pressure Monitoring System?
The Jansite 588 Tire Pressure Monitoring System has a pressure resolution of ±0.1 Bar (or ±1.45 PSI).
What are the dimensions of the package for the Jansite 588 Tire Pressure Monitoring System?
The package dimensions for the Jansite 588 Tire Pressure Monitoring System are 5.55 x 5.35 x 1.93 inches.
How much does the Jansite 588 Tire Pressure Monitoring System weigh?
The Jansite 588 Tire Pressure Monitoring System weighs 0.18 ounces, making it light and easy to install.
What type of batteries does the Jansite 588 Tire Pressure Monitoring System require?
The Jansite 588 Tire Pressure Monitoring System requires 5 Lithium Polymer batteries to power the sensors and receiver.
When was the Jansite 588 Tire Pressure Monitoring System first available?
The Jansite 588 Tire Pressure Monitoring System was first available on October 21, 2020.
Who is the manufacturer of the Jansite 588 Tire Pressure Monitoring System?
The Jansite 588 Tire Pressure Monitoring System is manufactured by Jansite.
