JA-116E-AN Bus Touchscreen keypad With RFID Reader
Specifications
- Type: JA-116E-AN Bus touchscreen keypad with
RFID reader – anthracite - Control Device: Touchscreen keypad
- Compatibility: Compatible with JA-103K and
JA-107K control panels - Power Consumption: Nominal current
consumption: 85 mA, Maximal current consumption: 250 mA - RFID Frequency: Not specified
- Dimensions: Not specified
- Weight: Not specified
- Classification: Not specified
- Operating Environment: Operating temperature
range and humidity not specified
Product Usage Instructions
Installation
The keypad must be installed by a trained technician with a
valid Jablotron certificate issued by an authorized distributor.
Follow the installation guidelines provided in the user manual for
proper setup.
Compatibility
This product is designed to work with JA-103K and JA-107K
control panels. Ensure compatibility before installation.
Operation
To operate the keypad, simply touch the screen to input commands
or access functions. Refer to the user manual for specific
instructions on using the RFID reader if available.
FAQ
Q: Can the JA-116E-AN keypad be used with other control
panels?
A: No, this keypad is specifically designed for use with JA-103K
and JA-107K control panels.
Q: What is the recommended power source for the keypad?
A: The keypad’s power requirements are specified in the
technical specifications section of the manual. Ensure to meet
these requirements for proper operation.
Description
JA-116E-AN Bus touchscreen keypad with RFID reader – anthracite
The keypad is a component of the JABLOTRON system and is designed to be operated by touch.
The keypad must be installed by a trained technician with a valid Jablotron certificate issued by an authorised distributor.
This product is compatible with JA-103K and JA-107K control panels.
Declaration of conformity – JA-116E-AN (PDF 672.22 kB)
Technical specifications
Type of control device Power Current power consumption for backup chose Nominal current consumption (display OFF) Maximal current consumption (for cable selection) RFID frequency Maximum RFID magnetic field strength Dimensions Weight Classification Environment Operating temperature range Average operational humidity Certification body In compliance with
type B from control panel bus 12 V DC (815 V) 40 mA
85 mA 250 mA
125 kHz -5.4 dBA/m (measured at 10 m) 95 x 183 x 30 mm 248 g Security grade 2/Environmental class II According to EN 50131-1) indoor general -10 °C to +40 °C 75% RH, w/o condensation Trezor Test s.r.o. (nr. 3025) ETSI EN 300 330, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-3
Can be operated according to Recommended screw
ERC REC 70-03 4 x ø 3.5 x 40 mm (half-round head)
Documents / Resources
![]() |
JABLOTRON JA-116E-AN Bus Touchscreen keypad With RFID Reader [pdf] User Guide JA-116E-AN, JA-116E-AN Bus Touchscreen keypad With RFID Reader, JA-116E-AN, Bus Touchscreen keypad With RFID Reader, Touchscreen keypad With RFID Reader, RFID Reader, Reader |