ZIGBEE Motion Sensor Night Light User Manual

ZIGBEE Motion Sensor Night Light

仕様

• 製品タイプ: PIR Sensor Night Light
• センサータイプ: パッシブ赤外線（PIR）
• 電源: (Please refer to product packaging for specific power source, e.g., AAA batteries, USB rechargeable)
• 光源： 導かれた
• 検出角度: (Typically 100-120 degrees, refer to packaging)
• 検出距離: (Typically 3-5 meters, refer to packaging)
• 動作モード: (e.g., ON, OFF, AUTO/Sensor Mode)
• 材料： (e.g., ABS Plastic)
• 寸法: （製品パッケージ参照）
• 重さ： （製品パッケージ参照）

製品説明

• Package information:1set included:
• 1×リットルamp, 1x USB cable,
• 1 metal plate with adhesive Lighting mode:
• When switch is on “White” position, it says the lamp is on motion sensor mode When motion is detected at night, the lamp will turn on automatically,and the light is white.
• When switch is on “Warm” position, it says the lamp is on motion sensor mode when motion is detected at night, the lamp will turn on automatically,and the light is warm.
• When switch is on “OFF” position, meaning the lamp オフです。

1. The human body sensing range is 120° horizontally, and the sensing effect is related to environmental temperature, body shape, and moving speed.
2. Please charge it before using it for the first time.
3. The surface of the product should not be covered by any other items. When cleaning the surface of the product, a soft cotton cloth should be used for wiping,
   Do not use corrosive cleaning agents for cleaning.
4. Avoid installing near heat sources, such as air conditioning vents, heating vents, humidifiers, and other sources of temperature fluctuations
   The location should be chosen carefully to avoid direct exposure to strong light or a humid environment.
5. If the brightness decreases or the working status is abnormal after normal use for a period of time, please charge it.
6. The red indicator light illuminates during charging, and it goes out when fully charged.

安全上の注意事項:

• Failure to operate according to the instructions may pose a danger.
• Illegal operations may damage your items and even endanger your life. Any losses caused by improper operations will not be covered by the manufacturer
• We will not bear any responsibility.
• Please do not disassemble this product without authorization.
• This is not a toy. To avoid danger, keep it away from infants and children.

照明モード:

1. When switch is on “AUTO” position, it says the lamp is on motion sensor mode. When motion is detected at night, the lamp 自動的にオンになります。
2. When switch is on “OFF” position, meaning the lamp オフです。
3. You can also set it to steady on mode by moving the button to “ON” position.

トラブルシューティング

• ライトが点灯しない:
  • 電力を確認します: Ensure batteries are correctly inserted and not depleted, or that the device is charged.
  • チェックモード: Make sure the switch is set to ‘AUTO’ or ‘ON’, not ‘OFF’.
  • 周囲光: In ‘AUTO’ mode, the light will only activate in dark conditions. Test in a dark room.
  • センサー障害: Ensure the PIR sensor is not blocked.
  • 動作範囲: Move closer to the sensor to ensure you are within its detection range.
• Light stays on continuously in ‘AUTO’ mode:
  • Constant Motion: Ensure there isn’t continuous motion within the sensor’s range (e.g., a pet, fan, or curtain moving).
  • センサーの誤動作： If no motion is present, try turning the device off and on again. If the issue persists, the sensor might be faulty.
• Light turns on too frequently or not frequently enough:
  • 配置: Adjust the placement of the night light. Avoid placing it near heat sources (which can trigger PIR sensors) or in direct sunlight.
  • センサー感度: Some models may have adjustable sensitivity. Refer to your product’s specific features.
• 光が暗い:
  • バッテリー残量低下: Replace batteries or recharge the device.
  • ほこり/汚れ: Clean the light surface.