Symcode MJ-X5-2D Bluetooth Wireless Barcode Scanner User Manual

1. はじめに

This manual provides detailed instructions for the Symcode MJ-X5-2D Bluetooth Wireless Barcode Scanner. It covers product features, setup procedures, operating modes, maintenance guidelines, and troubleshooting tips to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the scanner.

2. パッケージ内容

以下にリストされているすべてのアイテムがパッケージに含まれていることを確認してください。

• Symcode MJ-X5-2D Barcode Scanner
• USB充電/データケーブル
• 2.4GワイヤレスUSBドングル
• ユーザーガイド

Image: Contents of the Symcode MJ-X5-2D Barcode Scanner package, showing the scanner unit, a USB cable, a 2.4G wireless dongle, and the printed user guide.

3. セットアップ

3.1 初期充電

Before first use, fully charge the scanner. Connect the scanner to a USB power source using the provided USB cable. A full charge typically takes approximately 2 hours and provides up to 5 hours of continuous operation.

Image: The scanner next to a battery icon, illustrating the charging process and battery capacity. The scanner features a 650mAh rechargeable lithium-ion battery.

3.2 スキャナの接続

The Symcode MJ-X5-2D scanner offers multiple connectivity options:

• USB有線接続： Connect the scanner directly to your computer using the USB cable. The scanner will function as a plug-and-play device.
• 2.4Gワイヤレス接続: Insert the 2.4G USB dongle into your computer's USB port. The scanner will automatically pair with the dongle. This mode offers a barrier-free transmission distance of up to 150m (492ft) and up to 30m (98ft) in a barrier environment.
• Bluetooth接続： Enable Bluetooth on your host device (PC, laptop, tablet, smartphone). Put the scanner into Bluetooth pairing mode (refer to the specific pairing instructions in the included user guide). Select the scanner from your device's Bluetooth list to connect. Bluetooth offers a barrier-free transmission distance of up to 50m (164ft) and up to 15m (49ft) in a barrier environment.

Image: Connectivity options for the scanner, including USB wired, Bluetooth, and 2.4G wireless dongle, compatible with PCs, laptops, tablets, and phones.

Image: Transmission range capabilities for the 2.4GHz Wireless and Bluetooth connections. The 2.4GHz wireless mode offers up to 150m (492ft) barrier-free and 30m (98ft) with barriers. Bluetooth offers up to 50m (164ft) barrier-free and 15m (49ft) with barriers.

4。 動作モード

The scanner supports two primary data uploading modes:

• インスタントアップロードモード: In this mode, scanned barcode data is immediately transmitted to your connected device. This is suitable for real-time data entry.
• ストレージモード： The scanner can store up to 50,000 barcodes in its internal 16MB memory. Data is saved internally and can be uploaded to your device later when needed. This mode is ideal for inventory tasks where an immediate connection is not always available.

Image: Visual representation of the two data uploading modes. Instant Upload Mode sends data synchronously upon scanning, while Storage Mode saves up to 50,000 barcodes in 16MB memory for later upload.

5. サポートされているバーコード

The Symcode MJ-X5-2D scanner is capable of reading both 1D and 2D digital and printed barcodes:

• 1Dバーコード： Code 128, EAN-13, EAN-8, Code 39, Code 93, UPC-A, UPC-E, Codabar, Interleaved 2 of 5, ISBN, GS1 DataBar, Matrix 2 of 5, Code 11, Industrial 2 of 5, MSI.
• 2Dバーコード： Data Matrix, PDF417, QR code, Aztec, Maxicode, Hanxin.

Image: The scanner demonstrating its ability to read various 1D and 2D barcodes, including QR codes, from digital displays and printed labels.

6. メンテナンス

スキャナーの寿命を延ばし、最適なパフォーマンスを確保するには、次のメンテナンス ガイドラインに従ってください。

• クリーニング： スキャナの外側は、柔らかく乾いた布で拭いてください。スキャンウィンドウは、糸くずの出ない布で軽く拭いてください。amp低刺激性で研磨剤を含まない洗剤で洗ってください。刺激の強い化学薬品や研磨剤は使用しないでください。
• ストレージ： スキャナーは、直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。
• バッテリーのケア： Avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to about 50% and recharge every few months.
• 保護： スキャナーを落下や衝撃から保護します。

7。 トラブルシューティング

If you encounter issues with your Symcode MJ-X5-2D scanner, refer to the following common problems and solutions:

• スキャナーがオンにならない: バッテリーが充電されていることを確認してください。USBケーブルを使用してスキャナーを電源に接続してください。
• スキャナーがデバイスに接続されません:
  • For USB wired: Check the cable connection.
  • For 2.4G Wireless: Ensure the USB dongle is properly inserted and recognized by your computer.
  • For Bluetooth: Confirm Bluetooth is enabled on your device and the scanner is in pairing mode. Re-pair if necessary.
• スキャナーがバーコードを読み取れません:
  • バーコードがきれいで、損傷がなく、スキャナーの読み取り範囲内にあることを確認します。
  • バーコード タイプがスキャナーでサポートされているかどうかを確認します。
  • Verify that the scanner's lens is clean.
• Incorrect characters or unexpected behavior: This can sometimes occur with certain host devices or software configurations. Try resetting the scanner to factory defaults (refer to the full user guide for specific instructions). Ensure your device's input language settings are compatible.
• Scanner beeps/flashes 5 times and shuts off: This indicates a potential internal error or low battery. Try fully charging the device. If the issue persists, a factory reset might be required. Consult the full user guide for reset procedures.

If problems persist after attempting these solutions, please contact Symcode customer support.

8. 仕様

9. 保証とサポート

For warranty information, technical support, or service inquiries, please refer to the contact details provided in the original product packaging or visit the official Symcode webサイトでご確認ください。保証請求の際は購入証明として領収書を保管してください。